Tools & Adhesives

Sprayer has a removeable mist cap for an adjustable application and measurement markings on the bottle. Apply Super Seal™ in either a fine mist or heavy spray. 8 fl oz (2.36 mL) More Information Item # 6401 Brand All Game Terrain Scale All Scales MSRP 5.99 About Tools Use Tools to easily apply terrain on your desired look onto your miniature base or gaming board. Use landscape tools for your miniature wargaming or tabletop roleplaying game.

Read more less

Shakers are specially designed with smaller-sized holes for a closer application on your miniature base, terrain feature or gaming board. Use Shakers for Flowers and finer Ground Cover like Base Layer. The cap has multiple opening sizes for different application amounts. 2 PC (1.5 oz ea) More Information Item # 6400 Brand All Game Terrain Scale All Scales MSRP 5.99 About Tools Use Tools to easily apply terrain on your desired look onto your miniature base or gaming board. Use landscape tools for your miniature wargaming or tabletop roleplaying game.

Read more less

SwitchPilot 3 decoders are optimized for stationary use on your system and can switch conventional double coil switch drives, light signals, magnetic uncouplers, light bulbs or other stationary consumption.In order to facilitate the rather cumbersome configuration of magnetic article decoders, the SwitchPilot 3 has an innovative operating concept consisting of a 4-line, illuminated OLED display and three input buttons. Modes The SwitchPilot 3 is multi-protocol and can be used with workstations according to the Märklin® Motorola® system (e.g. 6021, Central Station® or Mobile Station®) as well as DCC-enabled control panels. The configuration can take place on both the main track and the programming track. Thanks to RailCom®, CVs can also be read out. Functioning The SwitchPilot 3 can be supplied directly from the digital system or from an external DC or change voltage source. It has a total of 8 transistor outputs, which are grouped in the 4 exit pairs 1 to 4. Each output pair contains two outputs (OutA and OutB) and can be configured individually for the desired use case:In pulse mode, the output is switched on as soon as a switching command is received. The fact that the output automatically switches off again as soon as the time stored in the decoder has elapsed prevents the burning of magnetic article drives.At the moment (K83-compatible) the output remains active as long as the button on the control panel is pressed. This operating mode is suitable for turnout drives with final shutdown or for de-caps.In bi-stable continuous operation (k84-compatible), the two outputs are switched on and off: When pressing the first button (red) on the control panel, the output Out A is switched on. It remains active until pressing the assigned button (green) activates the output Out B of the same output group. Out A and Out B behave like a change switch.In alternating flasher mode, the outputs Out A and Out B of an output pair are switched on alternately with an adjustable flashing frequency. The change indicator is started with the command "Ge- rade/Green" of the assigned button and stopped again with the command "Branching/Red".Optionally, the output can also be slowly dimmed and dimmed (so-called "zoom" for glow lam pen simulation).With the switch 3 mode switch, you can switch all output pairs together to the "k83" or "k84" modes at lightning speed, regardless of how they are configured. Feedback Since the SwitchPilot 3 is RailCom®-capable, all settings can be read out and changed directly in the built-in state on request. In combination with an ECoS as an ideal "partner", the SwitchPilot 3 can record and display the actual turnout setting with appropriately prepared turnout drives. Finally, you have the certainty that your switch has switched correctly! Set The SwitchPilot 3 can be flexibly adjusted either on the programming track with DCC control panels or on the main track with POM ("Programming on Main") or can also be read out via RailCom® CVs. On request, he also learns the addresses directly via a programming button. The easiest way to set is, of course, with the integrated OLED display and the three input buttons: All (!) Settings can be checked directly on the decoder and changed on request. A"Programming" with the help of your control panel is not required. It really can't be any easier. The ESU LokProgrammer can be used for firmware updates. Protection As with our locomotive decoders, the outputs of the SwitchPilot 3 are largely protected against overload. We want you to enjoy your decoder for as long as possible. More Information Item # 51840 Brand ESU Scale Multi WARNING: This product can expose you to a chemical, which is known to the State of California to cause Cancer and Reproductive Harm - For more information go to www.P65Warnings.ca.gov

Read more less

SwitchPilot 3 Plus decoders are optimized for stationary use on your system and can switch conventional double coil switch drives, light signals, magnetic uncouplers, light bulbs or other stationary consumption. In order to facilitate the rather cumbersome configuration of magnetic article decoders, the SwitchPilot 3 Plus has an innovative operating concept consisting of a 4-line, illuminated OLED display and three input buttons. Modes The SwitchPilot 3 Plus is multi-protocol and can be used with control panels according to the Märklin® Motorola® system (e.g. 6021, Central Station® or Mobile Station®) as well as DCC-enabled control panels. The configuration can take place on both the main track and the programming track. Thanks to RailCom®, CVs can also be read out. Functioning The SwitchPilot 3 Plus can be supplied directly from the digital system or from an external DC or change voltage source. It has a total of 16 transistor outputs, which are grouped in the 8 exit pairs 1 to 8. Each output pair contains two outputs (OutA and OutB) and can be configured individually for the desired use case: In pulse mode, the output is switched on as soon as a switching command is received. Since the output automatically switches off again as soon as a time stored in the decoder has been reached, a burn-through of magnetic articles is prevented. At the moment (K83-compatible) the output remains active as long as the button on the control panel is pressed. This operating mode is suitable for turnout drives with final shutdown or for de-caps. In bi-stable continuous operation (k84-compatible), the two outputs are switched on and off: When pressing the first button (red) on the control panel, the output Out A is switched on. It remains active until pressing the assigned button (green) activates the output Out B of the same output group. Out A and Out B behave like a change switch.In alternating flasher mode, the outputs Out A and Out B of an output pair are switched on alternately with an adjustable flashing frequency. The change indicator is started with the command "Gerade/Green" of the assigned button and stopped again with the command "Branching/Red".Optionally, the output can also be slowly dimmed and dimmed (so-called "zoom" for incandescent lamp simulation). Set The SwitchPilot 3 Plus can be flexibly adjusted either on the programming track with DCC control panels or on the main track with POM ("Programming on Main") or can also be read out via RailCom® CVs. On request, he also learns the addresses directly via a programming button. The setting is, of course, the simplest with the integrated OLED displays as well as the three input buttons: All (!) Settings can be checked directly on the decoder and changed on request. "Programming" with the help of your headquarters is not required. It really can't be any easier. The ESU LokProgrammer can be used for firmware updates. Protection As with our locomotive decoders, the outputs of the SwitchPilot 3 Plus are protected against overload. We want you to enjoy your decoder for as long as possible. More Information Item # 51831 Brand ESU Scale Multi WARNING: This product can expose you to a chemical, which is known to the State of California to cause Cancer and Reproductive Harm - For more information go to www.P65Warnings.ca.gov

Read more less

Labelle DCC / DC Track Conditioner If operating in either “DC” or “DCC” mode, and your locomotives have “headlight flicker” or your Decoders are cutting in and out, it is a sure sign your track needs cleaning with this Product. Just clean your track with this product and leave a micro-coating on the rails of LaBelle #105 and it will dramatically improve your DC/ DCC reliability. (We have done testing on private layouts with this new product and everyone who has used it, has been impressed by the improvement in Locomotive control.

Read more less

Labelle Coupler Lubricant with PTFE** for “HO”, “N” and “Z” scales –Ideal for keeping your operating knuckle couplers in good working order. –Ideal for track switch motors, switch mechanisms, and switch point throw arms. **PTFE has been called “the slickest substance known to man” is the parent chemical of “Teflon” which is registered trademark of Dupont Chemicals.

Read more less

LaBelle #102 is an extremely versatile gear lubricant and has an unlimited number of heavy duty uses for home, office, or laboratory, such as — –Model Trains: Exposed Gear Boxes (all scales) –RC Models. Exposed gear boxes on all RC models of all sizes and type. Shock Absorbers –Slot Cars: Exposed gear boxes on Slot Cars of all Sizes –Bicycles: Exposed cable rub points, gears. –Fishing Reel mechanisms –Other uses: Exposed gear boxes on all sorts of Household items, squeaky door hinges, Riding toys, musical instrument keys, mechanical toys of all types. **PTFE has been called “the slickest substance known to man” is the parent chemical of “Teflon” which is registered trademark of Dupont Chemicals.

Read more less

Sure to be the focal point of any HO Scale engine terminal, this Walthers Cornerstone 110' Motorized Turntable is where steam locomotives, and later diesels, were turned around at the end of their runs. Normally serving a roundhouse, turntables were placed adjoining the roundhouse, servicing tracks and at major terminals, backshops. This 110' turntable is large enough to turn larger locomotives such as a 4-8-4 Northerns and 2-10-2s. It'll look great at your locomotive terminal, at junctions and anywhere else medium-sized steam locomotives must be turned. On your layout use the 110' Motorized Turntable as the heart of your servicing facility alongside other Cornerstone railroad maintenance structures 110' 33.5m length typical of bigger tables built from 1900s on - some still in service today Must-have detail for engine terminals Holds locos up to 15-1/4" 38.7cm long Layout mounting templates for pit and Cornerstone Turntable Control Box User-friendly, illustrated instructions simplify assembly Requires 15-9/16" 39.5cm mounting hole to be cut in layout for installation 16-7/16" 41.7cm overall diameter Control Box included for use on layouts with DC or DCC train control New Cornerstone Turntable Control Box for simple operation and programming with: Programmable indexing for up to 99 different tracks One-touch 180-degree bridge rotation in either direction Simplified LED display with adjustable brightness Operable from up to four remote locations with additional Control Boxes (933-2320 each sold separately) Optional: To control turntable operation with DCC throttle or serial UART controller, purchase Cornerstone Advanced Control Module (933-2321, available separately) Comes complete with motor and Control Box, operates on 12-18v AC, 16-24v DC power supply (power supply not included) Comes with Code 83 rail installed on bridge

Read more less

Sure to be the focal point of any HO Scale engine terminal, this Walthers Cornerstone 90' Motorized Turntable is where steam locomotives, and later diesels, were turned around at the end of their runs. Normally serving a roundhouse, most smaller turntables were placed adjoining the roundhouse and servicing tracks. This 90' turntable is large enough to turn typical locomotives as large as a 2-8-2 Mikado or 4-6-2 Pacific. It'll look great at smaller terminals, at junctions and anywhere else steam locomotives must be turned. On your layout use the 90' Motorized Turntable as the heart of your servicing facility alongside other Cornerstone railroad maintenance structures Typical of tables built from 1900s on - some still in service today Fits most engine terminals Holds locos up to 12-3/8" 31.4cm long User-friendly, illustrated instructions simplify operation and programming Layout mounting templates for pit and Cornerstone Turntable Control Box Control Box included for use on layouts with DC or DCC train control New Cornerstone Turntable Control Box for simple operation and programming with: Programmable indexing for up to 99 different tracks One-touch 180-degree bridge rotation in either direction Simplified LED display with adjustable brightness Operable from up to four remote locations with additional Control Boxes (933-2320 each sold separately) Comes complete with motor and Control Box, operates on 12-18v AC, 16-24v DC power supply (power supply not included) Comes with Code 83 rail installed on bridge Optional: To control turntable operation with DCC throttle or serial UART controller, purchase Cornerstone Advanced Control Module (933-2321, available separately) Requires 12-3/4" 32.3cm mounting hole 13-3/4" 34.9cm overall diameter

Read more less

The Walthers Cornerstone HO Scale 90' Turntable is based on those used at small steam engine terminals. A vital part of train operations, this kit has ben carefully designed to fit most layouts and the 90' turntable has a one-piece pit for drop-in mounting. Once assembled, the bridge is manually position able. The kit includes the pit, gear drive, realistic decals and complete instructions. Complete hookup instructions cover wiring, adding track and more. The detailed bridge includes the operator's cab, handrails and a traditional arch (used to supply electrical power to the drive motors on the prototypes). This model can be motorized by adding Motorizing Kit 933-1050 (sold separately). The 90' Turntable is one of many Cornerstone HO Scale railroad buildings. Centerpiece for a small locomotive servicing area Manually position able Can be motorized by adding Motorizing Kit 933-1050 (sold separately) Molded in appropriate colors

Read more less

The Walthers Cornerstone Turntable Advanced Control Module makes it possible to operate your Motorized Turntable using DCC, serial UART, keypad or switch contacts. For DCC applications this circuit will function as a stationary decoder with no CV or programming required. The Turntable Advanced Control Module includes the circuit, Connection cable and complete instructions. Adds DCC, serial UART, keypad and switch contact input modes including: DCC control using stationary decoder protocols Numeric Keypad Button per track Rotary selector switch Control box emulation Serial Rx/Tx UART port   Digital outputs for remote dual digit display and controlling track power relays to selectively power service tracks automatically Measures: 2-3/4" (70mm) x 4-3/16" (107mm) Please Note: This unit is designed for use only with the following Motorized Turntables, each sold separately:   HO Scale 90' 933-2860 HO Scale 110' 933-2851 HO Scale 130' 933-2859 N Scale 130' 933-2618

Read more less

Power your Walthers Cornerstone HO or N Scale Turntables (sold separately) quickly and easily with this plug-in wall unit featuring: Installs in minutes - instructions included Independent 800 ma 16VDC filtered power supply Includes adapter cord to connect to turntable Positive contact barrel-type connectors Intertek listed Made especially for use with Cornerstone HO 90' (933-2860), 110' (933-2851) and 130' (933-2859), and N Scale 130' (933-2618) Motorized Turntables, each sold separately - may also be used with earlier N Scale 130' 933-2616, HO 130' 933-2850 and HO 90' 933-2849 Turntables. PLEASE NOTE: Unit operates on 120V (standard North American house current) only.

Read more less