WalthersMainline
-
WalthersMainline WalthersMainline 910-251 | Diesel Detail Kit - EMD SD70ACe | HO Scale
EMD SD70ACe Make your WalthersMainline locos even more realistic in minutes with this Diesel Detail Kit! The complete set of HO grab irons fits the standard locations on the model, and they're made of durable, factory-formed stainless steel wire. The set details one model and includes illustrated instructions. Parts in this 24-piece set include: 2 Long straight grab irons for rear hood 13 Drop-type grabs for long and short hoods 1 L-shaped grab for top of long hood 2 cab brow grabs, one each left and right 3 Drop-type grabs for inverter 1 Straight grab for hood mount above inverter 2 Straight grabs for outside edges of front hood Model shown not included.
£8.75
-
WalthersMainline Walthers Mainline 910-11003 | EMD SD75M - Standard DC - BNSF Railway #8268 (orange, black, green, silver, Heritage II) | HO Scale
Bring big power to your HO railroad with the WalthersMainline SD75M! Built from 1995 to 1996 at the request of the Santa Fe for a higher horsepower unit (4300 versus 4000 for a standard SD70), most were later transferred to the new Burlington Northern & Santa Fe Railway following the 1995 merger, where many are still in service with BNSF. These units were built with the wide North American Safety Cab, thus the "M" (for "modified") in the model designation. Other features include: One time run of these roadnumbers, order now - limited quantity available! Correct North American Safety Cab per prototype Flush radiators per early production units Correct HTCR-1a or HTCR-1b trucks per prototype Brass Nathan K5 air horn Treadplate detail on walkways Minimum radius 18" (22" or larger recommended) Fully assembled LED Lighting includes: 21-Pin DCC plug Same powerful drive as WalthersProto(R) locos featuring: 5-pole skew-wound motor 14:1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Dual machined brass flywheels Heavy die cast metal chassis Cab interior 5000-gallon fuel tank w/road specific details Standard bell on conductor's side Molded drill starter points for grab irons - easily added with SD70-Series Diesel Detail Kit (910-261, sold separately) Correct size RP-25 metal wheels Proto MAX(TM) magnetic metal knuckle couplers Road-specific details on this model include: Low headlight HTCR-1a trucks Nose door with window More Information Item # 11003 Brand WalthersMainline Scale HO Type EMD SD75M Engine Electronics Standard DC Road Name BNSF Railway Road Number 8268 MSRP $169.98
£120.51
-
WalthersMainline Walthers Mainline 910-11002 | EMD SD75M - Standard DC - Santa Fe #222 (red, silver, Superfleet) | HO Scale
Bring big power to your HO railroad with the WalthersMainline SD75M! Built from 1995 to 1996 at the request of the Santa Fe for a higher horsepower unit (4300 versus 4000 for a standard SD70), most were later transferred to the new Burlington Northern & Santa Fe Railway following the 1995 merger, where many are still in service with BNSF. These units were built with the wide North American Safety Cab, thus the "M" (for "modified") in the model designation. Other features include: One time run of these roadnumbers, order now - limited quantity available! Correct North American Safety Cab per prototype Flush radiators per early production units Correct HTCR-1a or HTCR-1b trucks per prototype Brass Nathan K5 air horn Treadplate detail on walkways Minimum radius 18" (22" or larger recommended) Fully assembled LED Lighting includes: 21-Pin DCC plug Same powerful drive as WalthersProto(R) locos featuring: 5-pole skew-wound motor 14:1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Dual machined brass flywheels Heavy die cast metal chassis Cab interior 5000-gallon fuel tank w/road specific details Standard bell on conductor's side Molded drill starter points for grab irons - easily added with SD70-Series Diesel Detail Kit (910-261, sold separately) Correct size RP-25 metal wheels Proto MAX(TM) magnetic metal knuckle couplers Road-specific details on this model include: High headlight HTCR-1a trucks Nose door with window More Information Item # 11002 Brand WalthersMainline Scale HO Type EMD SD75M Engine Electronics Standard DC Road Name Santa Fe Road Number 222 MSRP $169.98
£120.51
-
WalthersMainline Walthers Mainline 910-11012 | EMD SD70M - Standard DC -Norfolk Southern #2590 | HO Scale
Enjoy complimentary shipping!Bundle your purchases for even more savings with our free shipping option. (This offer is optional) Bring big power to your HO railroad with the WalthersMainline SD70M! Introduced in 1992 and built through 2004, this later "modified" (as noted by the "M" in the model designation) version of the EMD SD70, was equipped with a wide nose and North American Safety Cab. Based on the Phase I version our layout-ready models feature: All-New Tooling! One time run of these roadnumbers, order now - limited quantity available! Correct North American Safety Cab per prototype Flush radiators per early production units Factory-installed, pre-wired speaker Correct HTCR-1a or HTCR-1b trucks per prototype Brass Nathan K5 air horn Treadplate detail on walkways Minimum radius 18" (22" or larger recommended) Fully assembled LED Lighting includes: 21-Pin DCC plug Same powerful drive as WalthersProto(R) locos featuring: 5-pole skew-wound motor 14:1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Dual machined brass flywheels Heavy die cast metal chassis Cab interior 5000-gallon fuel tank w/road specific details Standard bell on conductor's side Molded drill starter points for grab irons - easily added with SD70-Series Diesel Detail Kit (910-261, sold separately) Correct size RP-25 metal wheels Proto MAX(TM) magnetic metal knuckle couplers More Information Item # 910-11012 Brand WalthersMainline Scale HO Engine Electronics Standard DC Type EMD SD70M Road Name Norfolk Southern Road Number 2590 MSRP $169.98
£120.51
-
WalthersMainline WalthersMainline 910-50512 | 53' GSC Piggyback Service Flatcar - Ready to Run - Southern Pacific(TM) #142796 | HO Scale
Bring trailer-on-flatcar (TOFC) service to your HO railroad with this authentic version of the General Steel Castings (GSC) Piggyback Service Flatcar! Typical of existing flat cars many railroads converted for this traffic in the mid-1950s, features of these WalthersMainline models include: One-time run of these roadnumbers, order now - limited quantity available! NEW - Die cast metal body for excellent performance empty or loaded Used for piggyback service from 1955 to 1980s Factory-installed original style trailer hitch, rub rails and bridge plates Detailed body and deck Add loads in minutes with SceneMaster(TM) 35' (949-2400-series) and 40' Trailmobile (949-2500 series) Trailer 2-Packs sold separately Correct 33" turned-metal RP-25 wheelsets Proto MAX(TM) magnetic metal knuckle couplers More Information Item # 910-50512 Brand WalthersMainline Scale HO Type 53' GSC Piggyback Service Flatcar Road Name Southern Pacific Road Number 142796 Release Date Q1 2024
£24.80
-
WalthersMainline WalthersMainline 910-50511 | 53' GSC Piggyback Service Flatcar - Ready to Run - Southern Pacific(TM) #142788 | HO Scale
Bring trailer-on-flatcar (TOFC) service to your HO railroad with this authentic version of the General Steel Castings (GSC) Piggyback Service Flatcar! Typical of existing flat cars many railroads converted for this traffic in the mid-1950s, features of these WalthersMainline models include: One-time run of these roadnumbers, order now - limited quantity available! NEW - Die cast metal body for excellent performance empty or loaded Used for piggyback service from 1955 to 1980s Factory-installed original style trailer hitch, rub rails and bridge plates Detailed body and deck Add loads in minutes with SceneMaster(TM) 35' (949-2400-series) and 40' Trailmobile (949-2500 series) Trailer 2-Packs sold separately Correct 33" turned-metal RP-25 wheelsets Proto MAX(TM) magnetic metal knuckle couplers More Information Item # 910-50511 Brand WalthersMainline Scale HO Type 53' GSC Piggyback Service Flatcar Road Name Southern Pacific Road Number 142788 Release Date Q1 2024
£24.80
-
WalthersMainline WalthersMainline 910-50510 | 53' GSC Piggyback Service Flatcar - Ready to Run - Southern Pacific(TM) #142770 | HO Scale
Bring trailer-on-flatcar (TOFC) service to your HO railroad with this authentic version of the General Steel Castings (GSC) Piggyback Service Flatcar! Typical of existing flat cars many railroads converted for this traffic in the mid-1950s, features of these WalthersMainline models include: One-time run of these roadnumbers, order now - limited quantity available! NEW - Die cast metal body for excellent performance empty or loaded Used for piggyback service from 1955 to 1980s Factory-installed original style trailer hitch, rub rails and bridge plates Detailed body and deck Add loads in minutes with SceneMaster(TM) 35' (949-2400-series) and 40' Trailmobile (949-2500 series) Trailer 2-Packs sold separately Correct 33" turned-metal RP-25 wheelsets Proto MAX(TM) magnetic metal knuckle couplers More Information Item # 910-50510 Brand WalthersMainline Scale HO Type 53' GSC Piggyback Service Flatcar Road Name Southern Pacific Road Number 142770 Release Date Q1 2024
£24.80
-
WalthersMainline WalthersMainline 910-19480 | EMD F40PH - ESU® Sound & DCC - Grand Canyon Railway #239 | HO Scale
Power your favorite regional commuter trains in style with a WalthersMainline F40PH on the job! Built especially for passenger duties, the prototypes entered service in 1976 and many are still going strong today. Based on Phase 2b prototypes, the models feature: One time run of these roadnumbers, limited quantity available - order now! Factory-installed vertical hand rails Molded drill starter points for grab irons (sold separately) RP-25 metal wheels Proto MAX(TM) metal knuckle couplers Fully assembled 21mtc connector ESU Sound for DCC and DC layouts featuring: - 4 function outputs with brightness control by CV - Fully DCC compatible - 14, 28, 128 speed steps - Dual mode DC and DCC - 4 air horns changeable by CVs - 2 bells changeable by CVs - Full 8-notch prime mover sounds - Compressor - Dynamic brake Same powerful drive as WalthersProto(R) locos featuring - Five-pole skew-wound motor - 14:1 gear ratio - Helical-cut gears for quiet operation and easy multiple unit operation - All-wheel drive and electrical pickup - Heavy die-cast metal chassis - Constant and directional LED lights PLEASE NOTE: When operating Walthers-branded DCC-equipped locomotives in DC mode, do not use power packs that exceed an 18V rating. This includes MRC 1300-series power packs which have known issues with our decoders. Alternate horns and bell sounds can be programmed on the sound decoder using these CVs: Horns: CV163 = 0 - Nathan K5LH (default) CV163 = 1 - Nathan K5HLL CV163 = 2 - Nathan K5H CV163 = 3 - Nathan K5LLA Bells: CV164 = 0 - Graham White E-Bell (default) CV164 = 1 - GE Steel Bell More Information Item # 910-19480 Brand WalthersMainline Scale HO Type EMD Diesel Road Name Grand Canyon Railway Road Number 239
£141.79
-
WalthersMainline Walthers Mainline 910-250 | Diesel Detail Kit - General Electric ES44 GEVO | HO Scale
Make your WalthersMainline locos even more realistic in minutes with this Diesel Detail Kit! The complete set of HO grab irons fits the standard locations on the model, and they're made of durable, factory-formed stainless steel wire. The set details one model and includes illustrated instructions. Parts in this 25-piece set include: 4 front drop grab irons 8 small straight nose grab irons 4 long straight nose grab iron 2 rear pilot grab irons 2 long end handrail grab irons 2 drop grab irons for long hood behind cab 3 drop grab irons for rear inverter box 2 plastic injected cut levers More Information Item # 910-250 Brand WalthersMainline Scale HO Type Diesel Detail Kit Use With Walthers Mainline 910-10200, 910-10201 Model shown not included.
£14.17
-
WalthersMainline Walthers Mainline 910-3240 | 60' Pullman-Standard Auto Parts Boxcar (10' and 6' doors) - Ready to Run - Southern Pacific(TM) #668000 | HO Scale
Model auto parts traffic in minutes with the WalthersMainline 60' Pullman-Standard Double Door Auto Parts Boxcar (10' and 6' doors). Designed to provide easier access for loading and unloading with forklifts, the prototypes were used to handle heavy loads such as engines and transmissions. Features of these unique cars include: Updated tooling features new car sides - perfect for use with Walthers Auto Series cars and kits available separately! One time run of these road numbers, order now - limited quantity available Based on cars with 10' and 6' side doors for easier loading/unloading Prototypes handled heavier loads such as engines, transmissions and brake drums In service from 1960s to 2000s 70-Ton Trucks Correct 33" RP-25 metal wheels Proto MAX(TM) metal knuckle couplers More Information Item # 910-3240 Brand WalthersMainline Scale HO Type 60' Pullman-Standard Auto Parts Boxcar Road Name Southern Pacific(TM) Road Number 668000
£23.35
-
WalthersMainline Walthers Mainline 910-3994 | 57' Mechanical Reefer - Ready to Run - Union Pacific(R) UPFE #461102 | HO Scale
Move all kinds of perishable products on your HO railroad with WalthersMainline 57' Reefers! Based on cars built by Pacific Car and Foundry (PC&F) for Pacific Fruit Express and several railroads from 1967 to 1968, the prototypes roamed far and wide serving growing areas, cold storage plants and regional grocery distributors into the early 2000s. Fully assembled in colorful period schemes, nicely detailed and affordably priced, check out all the features including: One time run of these roadnumbers, order now - limited quantity available Prototypes moved all types of fresh fruit and vegetables, plus canned and frozen foods Keystone or Hydra-Cushion underframe detail as appropriate Short ladders and low hand brakes 9' Youngstown plug door with separate latch bars Authentic Stanray peaked, ribbed roof with capped exhaust stack Detailed underbody with brake gear and fuel tanks 70-ton roller bearing trucks Correct 33" RP-25 turned-metal wheelsets Proto MAX(TM) metal knuckle couplers More Information Item # 910-3994 Brand WalthersMainline Scale HO Type 57' Mechanical Reefer Road Name Union Pacific(R) Road Number 461102
£22.51
-
WalthersMainline Walthers Mainline 910-3995 | 57' Mechanical Reefer - Ready to Run - Union Pacific(R) UPFE #461125 | HO Scale
Move all kinds of perishable products on your HO railroad with WalthersMainline 57' Reefers! Based on cars built by Pacific Car and Foundry (PC&F) for Pacific Fruit Express and several railroads from 1967 to 1968, the prototypes roamed far and wide serving growing areas, cold storage plants and regional grocery distributors into the early 2000s. Fully assembled in colorful period schemes, nicely detailed and affordably priced, check out all the features including: One time run of these roadnumbers, order now - limited quantity available Prototypes moved all types of fresh fruit and vegetables, plus canned and frozen foods Keystone or Hydra-Cushion underframe detail as appropriate Short ladders and low hand brakes 9' Youngstown plug door with separate latch bars Authentic Stanray peaked, ribbed roof with capped exhaust stack Detailed underbody with brake gear and fuel tanks 70-ton roller bearing trucks Correct 33" RP-25 turned-metal wheelsets Proto MAX(TM) metal knuckle couplers More Information Item # 910-3995 Brand WalthersMainline Scale HO Type 57' Mechanical Reefer Road Name Union Pacific(R) Road Number 461125
£22.51