Among the first standard boxcar designs adopted by American railroads, the WalthersMainline 1937 40' AAR Modified Boxcar features: One-time run of these roadnumbers, order now, limited quantity available! 1000s used in general service late 1930s to 1980s Based on taller cars built with 10' 6" interior height featuring: 5-5 Dreadnaught ends Murphy panel roof Wood running board 6' Youngstown doors AAR (tab) side sills Correct 33" RP-25 turned-metal wheelsets Proto MAX(TM) metal knuckle couplers
£20.08
PLEASE NOTE: When operating Walthers-branded DCC-equipped locomotives in DC mode, do not use powerpacks that exceed an 18V rating. This includes MRC 1300-series powerpacks, which have known issues with our decoders. WalthersMainline Phase II Chopped Nose GP9 is a must-have model for your 1960s and later diesel roster! Outwardly similar to the earlier GP7, and sharing the same boxy, no frills body with its high, short hood, minor production changes in the number and placement of louvers on locomotives built from 1955 to 1957 resulted in what modelers and railfans refer to as "phase two" GP9s. In the 1960s, many roads began rebuilding their GP9s as an affordable alternative to new equipment, and many were refitted with chopped short hoods to improve forward visibility. Like it's prototypes, many are still going strong today and the WalthersMainline Phase II GP9 with chopped nose is perfect power for any assignment and features: One time run of these roadnumbers - order now, limiyted quantity available! Detailed body with chopped nose Based on Phase II units rebuilt in the 1960s by many owners Scale width hood with correct contours With or without dynamic brakes as appropriate See-through steps Correct RP-25 metal wheels Available with ESU Sound and DCC for DCC or DC layouts featuring: 4 function outputs with brightness control by CV Fully DCC compatible 14, 28 or 128 speed steps Dual mode DC and DCC 4 Airhorns changeable by CVs 2 bells changeable by CVs Full 8-notch prime mover sounds Compressor Dynamic brake Same powerful drive as WalthersProto(R) locos featuring: Five-pole skew-wound motor 14 to 1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Machined brass flywheel Heavy die-cast metal chassis Constant and directional LED headlights 21-pin DCC plug Molded drill starter points - add grab irons to your model easily with the GP9 Phase II Diesel Detail Kit (#910-258 sold separately) Additional information on DCC functions:ESU CV ListESU Function MappingESU Function Output Alternate Horns and Bells include: Horns: CV163 = 0 - Leslie A-200 (default) CV163 = 1 - Wabco Single Chime CV163 = 2 - Leslie S3L CV163 = 3 - Nathan M5 Bells: CV164 = 0 - EMD Brass Bell (default) CV164 = 1 - EMD Steel Bell
£148.01
PLEASE NOTE: When operating Walthers-branded DCC-equipped locomotives in DC mode, do not use powerpacks that exceed an 18V rating. This includes MRC 1300-series powerpacks, which have known issues with our decoders. WalthersMainline Phase II Chopped Nose GP9 is a must-have model for your 1960s and later diesel roster! Outwardly similar to the earlier GP7, and sharing the same boxy, no frills body with its high, short hood, minor production changes in the number and placement of louvers on locomotives built from 1955 to 1957 resulted in what modelers and railfans refer to as "phase two" GP9s. In the 1960s, many roads began rebuilding their GP9s as an affordable alternative to new equipment, and many were refitted with chopped short hoods to improve forward visibility. Like it's prototypes, many are still going strong today and the WalthersMainline Phase II GP9 with chopped nose is perfect power for any assignment and features: One time run of these roadnumbers - order now, limiyted quantity available! Detailed body with chopped nose Based on Phase II units rebuilt in the 1960s by many owners Scale width hood with correct contours With or without dynamic brakes as appropriate See-through steps Correct RP-25 metal wheels Available with ESU Sound and DCC for DCC or DC layouts featuring: 4 function outputs with brightness control by CV Fully DCC compatible 14, 28 or 128 speed steps Dual mode DC and DCC 4 Airhorns changeable by CVs 2 bells changeable by CVs Full 8-notch prime mover sounds Compressor Dynamic brake Same powerful drive as WalthersProto(R) locos featuring: Five-pole skew-wound motor 14 to 1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Machined brass flywheel Heavy die-cast metal chassis Constant and directional LED headlights 21-pin DCC plug Molded drill starter points - add grab irons to your model easily with the GP9 Phase II Diesel Detail Kit (#910-258 sold separately) Additional information on DCC functions:ESU CV ListESU Function MappingESU Function Output Alternate Horns and Bells include: Horns: CV163 = 0 - Leslie A-200 (default) CV163 = 1 - Wabco Single Chime CV163 = 2 - Leslie S3L CV163 = 3 - Nathan M5 Bells: CV164 = 0 - EMD Brass Bell (default) CV164 = 1 - EMD Steel Bell
£148.01
WalthersMainline takes the hard work out of modeling one of the most popular prototype diesels ever, with the EMD GP9 Phase II (sometimes referred to as the Phase 2) with Chopped Short Hood in HO Scale! Typical of railroad rebuilds from the 1960s on that are still going strong today, they're nicely detailed, and equipped with the proven power of a WalthersProto(R) drive. Perfect for railroads big or small the WalthersMainline EMD GP9 Phase II with Chopped Short Hood features: One of the most widely used diesels ever - based on Phase II units rebuilt for improved forward visibility and in service from the 1960s to present Limited edition - one time run of these roadnumbers! Scale width hood with correct contours See-through steps Same powerful drive as WalthersProto(R) locos featuring: Five-pole skew-wound motor 14 to 1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Machined brass flywheel Heavy die-cast metal chassis Constant and directional LED headlights 21-pin DCC plug Molded drill starter points - add grab irons to your model easily with the GP9 Phase II Diesel Detail Kit (#910-258 sold separately) Additional information on DCC functions:ESU CV ListESU Function MappingESU Function Output Alternate horns and bells can be programmed on the sound decoder using these CVs: Horns: CV163 = 0 - Leslie A-200 (default) CV163 = 1 - Wabco single-chime CV163 = 2 - Nathan M3 CV163 = 3 - Leslie S3L Bells: CV164 = 0 - Bronze bell (default) CV164 = 1 - Steel bell
£110.14
WalthersMainline takes the hard work out of modeling one of the most popular prototype diesels ever, with the EMD GP9 Phase II (sometimes referred to as the Phase 2) with Chopped Short Hood in HO Scale! Typical of railroad rebuilds from the 1960s on that are still going strong today, they're nicely detailed, and equipped with the proven power of a WalthersProto(R) drive. Perfect for railroads big or small the WalthersMainline EMD GP9 Phase II with Chopped Short Hood features: One of the most widely used diesels ever - based on Phase II units rebuilt for improved forward visibility and in service from the 1960s to present Limited edition - one time run of these roadnumbers! Scale width hood with correct contours See-through steps Same powerful drive as WalthersProto(R) locos featuring: Five-pole skew-wound motor 14 to 1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Machined brass flywheel Heavy die-cast metal chassis Constant and directional LED headlights 21-pin DCC plug Molded drill starter points - add grab irons to your model easily with the GP9 Phase II Diesel Detail Kit (#910-258 sold separately) Additional information on DCC functions:ESU CV ListESU Function MappingESU Function Output Alternate horns and bells can be programmed on the sound decoder using these CVs: Horns: CV163 = 0 - Leslie A-200 (default) CV163 = 1 - Wabco single-chime CV163 = 2 - Nathan M3 CV163 = 3 - Leslie S3L Bells: CV164 = 0 - Bronze bell (default) CV164 = 1 - Steel bell
£110.14
Serve shippers on your HO railroad with these WalthersMainline 50' ACF Exterior-Post Boxcars. Responding to a growing shortage of serviceable cars, ACF and other builders unveiled a new generation of bigger equipment in the 1970s with increased width and height to improve carrying capacity. Today, they're still in service for Railbox and many other roads, where they can be found moving all types of cargo. Features of these models include: One time run of these roadnumbers, order now - limited quantity available Prototypes seen from coast-to-coast 1974 to the present Handles all types of general freight loading Used by Railbox and dozens of other railroads Correct Plate B dimensions: 41' 3" Truck Centers 15' 2" Tall 10' 8" Wide Fully assembled Correct 33" RP-25 metal wheelsets Proto MAX(TM) metal knuckle couplers Related Products: Walthers Mainline 910-1860 (current) Walthers Mainline 910-1861 Walthers Mainline 910-1862 Walthers Mainline 910-1863
£21.86
Serve shippers on your HO railroad with these WalthersMainline 50' ACF Exterior-Post Boxcars. Responding to a growing shortage of serviceable cars, ACF and other builders unveiled a new generation of bigger equipment in the 1970s with increased width and height to improve carrying capacity. Today, they're still in service for Railbox and many other roads, where they can be found moving all types of cargo. Features of these models include: One time run of these roadnumbers, order now - limited quantity available Prototypes seen from coast-to-coast 1974 to the present Handles all types of general freight loading Used by Railbox and dozens of other railroads Correct Plate B dimensions: 41' 3" Truck Centers 15' 2" Tall 10' 8" Wide Fully assembled Correct 33" RP-25 metal wheelsets Proto MAX(TM) metal knuckle couplers Related Products: Walthers Mainline 910-1860 Walthers Mainline 910-1861 (current) Walthers Mainline 910-1862 Walthers Mainline 910-1863
£21.86
Serve shippers on your HO railroad with these WalthersMainline 50' ACF Exterior-Post Boxcars. Responding to a growing shortage of serviceable cars, ACF and other builders unveiled a new generation of bigger equipment in the 1970s with increased width and height to improve carrying capacity. Today, they're still in service for Railbox and many other roads, where they can be found moving all types of cargo. Features of these models include: One time run of these roadnumbers, order now - limited quantity available Prototypes seen from coast-to-coast 1974 to the present Handles all types of general freight loading Used by Railbox and dozens of other railroads Correct Plate B dimensions: 41' 3" Truck Centers 15' 2" Tall 10' 8" Wide Fully assembled Correct 33" RP-25 metal wheelsets Proto MAX(TM) metal knuckle couplers Related Products: Walthers Mainline 910-1860 Walthers Mainline 910-1861 Walthers Mainline 910-1862 (current) Walthers Mainline 910-1863
£21.86
Serve shippers on your HO railroad with these WalthersMainline 50' ACF Exterior-Post Boxcars. Responding to a growing shortage of serviceable cars, ACF and other builders unveiled a new generation of bigger equipment in the 1970s with increased width and height to improve carrying capacity. Today, they're still in service for Railbox and many other roads, where they can be found moving all types of cargo. Features of these models include: One time run of these roadnumbers, order now - limited quantity available Prototypes seen from coast-to-coast 1974 to the present Handles all types of general freight loading Used by Railbox and dozens of other railroads Correct Plate B dimensions: 41' 3" Truck Centers 15' 2" Tall 10' 8" Wide Fully assembled Correct 33" RP-25 metal wheelsets Proto MAX(TM) metal knuckle couplers Related Products: Walthers Mainline 910-1860 Walthers Mainline 910-1861 Walthers Mainline 910-1862 Walthers Mainline 910-1863 (current)
£21.86
Make your passenger cars even more realistic with this set of add-on details made especially for WalthersMainline HO models. There's a full set of durable formed stainless steel grab irons, along with body-mounted coupler boxes with a swinging drawbar, bushing and cover for improved operation on 24" and larger curves. Parts for one car are included along with complete illustrated instructions.
£7.44£7.07
Modernize your HO freight operations in minutes with the WalthersMainline 68' Railgon Gondola! Introduced as a replacement for older 50' cars in the Railgon and many railroad fleets, this layout-ready model features: One time run of these road numbers, order now - limited quantity available! Prototypes in service from 2010 to the present with TTX and railroad owners Used to carry all types of finished steel products, scrap and similar bulk loads Authentic prototype details include: -See-through square load tie-downs along top chord -17-rib sidewalls -Straight sill Detailed brake gear 100-ton trucks with correct 36" turned metal RP-25 wheels Proto MAX(TM) metal knuckle couplers
£22.02
Modernize your HO freight operations in minutes with the WalthersMainline 68' Railgon Gondola! Introduced as a replacement for older 50' cars in the Railgon and many railroad fleets, this layout-ready model features: One time run of these road numbers, order now - limited quantity available! Prototypes in service from 2010 to the present with TTX and railroad owners Used to carry all types of finished steel products, scrap and similar bulk loads Authentic prototype details include: -See-through square load tie-downs along top chord -17-rib sidewalls -Straight sill Detailed brake gear 100-ton trucks with correct 36" turned metal RP-25 wheels Proto MAX(TM) metal knuckle couplers
£22.02
