Kadee 309 | Under-the-Ties Delayed-Action Electric Uncoupler Kit | HO Scale

#309 Under-the-Ties Delayed-Action Electric Uncoupler Kit - HO Scale

Kadee® #165 Red - Normally Open momentary contact push button switches are recommend.

Fits any HO code track.

This package contained one HO Scale Magne-Electric electromagnetic, delayed action uncoupler kit, ready to assemble and install Under-the-Ties. It can be installed on any straight layout track, but especially on mainlines, were false uncoupling my occur.

Fits any HO code track.

Operates: 16 volt DC. We recommend a 16 volt DC power source (at least 3 Amps) or 18 volt AC power source (at least 3 Amps)converted to DC with bridge rectifier.

WARNING: Do not use the uncoupler continually. DO NOT activate the uncoupler for longer than 2 MINUTES at one time.
This will avoid possible overheating which will damage the uncoupler.

(Track Not Included)

Package Includes:

• (1) Each Coil
• (1) Each Steel core
• (4) Each Field plates
• (1) Each Field plate divider
• (1) Each Upper track mounting plate
• (1) Each 10-32 x 7/8" Bolt
• (1) Each 10-32 Nut
• (3) Each 2 x 3/8" flat head self-tapping screws
• (4) Each 0-48 x 1/4" screws
• (4) Each 0-48 x 3/8" screws
• (1) Each Bridge Rectifier
• (1) Each Capacitor
  
  

Recommended Accessories:

• 3 Amp Push button momentary switch
• SPST - Normally Open (Kadee #165)
• Light bulb - 14-20 Volts, .2 Amp
• #20 AWG Wire- insulated, strand in two color codes
• Rosin Core Solder - 1/16" size
• Track Section, 3 1/2" long
• Roadbed Section, 2 1/8" long
• Metal Rail Joiners
• Ballast

Recommended Tools:

• Power or Crank Drill - with 1/4" bit
• 1/4" Drill
• #52 Drill (Kadee #780 Tap & Drill set)
• #55 Drill (Kadee #780 Tap & Drill set)
• Reg. Screwdriver - with 1/8" head
• Modeler's Knife
• Razor Saw
• Flat Chisel, 1/2"
• Medium Tooth File - 1/2" wide
• Household Pliers
• Soldering Iron
• White Glue
• Fine Tooth File - 1/2" wide