Digitrax TF4 | Quad 4-Function DCC Decoder with Integrated Transponding - 1A Continuous, Hardwire Install | Multi Scale

The Digitrax TF4 is a quad-function DCC decoder with integrated transponding — four independently controlled function outputs on one tiny board, plus Digitrax's position-tracking feature built right in. Perfect for adding ditch lights, mars lights, rear markers, classification lamps, smoke generators, or any other DCC-controlled accessory cluster to a non-decoder locomotive.

Looking for more DCC decoders and electronics? Browse our DCC Decoders and Electronics & Wiring collections.

• Four independent DCC-controllable function outputs (white, yellow, green, purple) — control each one separately via your throttle.
• Integrated transponding — Digitrax position-tracking built in, no separate transponder board needed.
• 1A continuous, 2A peak combined function output — plenty for headlights, ditch lights, rear lights, smoke, or accessory clusters.
• Hardwire install with color-coded leads — works in HO, N, O, S, and G scale.
• Full CV programming including FX3 lighting effects (Mars, Gyralite, Strobe, Random Flicker, Soft On/Off, Rule 17, etc.) on every output.
• SuperSonic silent-running operation, NMRA DCC compatible.

What's the difference between the TF4 and the TL1?
The TL1 has one function output; the TF4 has four. If you need to control multiple separate lighting circuits (headlight + ditch lights + class lamps + rear marker) the TF4 is the right call. Both have integrated transponding.

Does this drive a motor?
No — the TF4 is function-only. For motor + lights in one board, use a full mobile decoder like the Digitrax DH126 or DZ126.

What can I wire to the function outputs?
LEDs (with resistors), incandescent bulbs, smoke units, ditch lights, mars lights, signal lamps, sound modules — anything DC-driven under 1A combined draw. FX3 effects make each output simulate prototypical lighting patterns independently.

Will it work with any DCC system?
Yes — standard NMRA DCC. Transponding readback requires a Digitrax LocoNet command station with detection sections (BDL168, BDL16, etc.).