Digitrax TL1 | Single Function DCC Decoder with Integrated Transponding - 1A Continuous, Hardwire Install | Multi Scale

The Digitrax TL1 is a single-function DCC decoder with integrated transponding — perfect for adding a controllable function output (lights, smoke, or other accessory) to a non-decoder locomotive while also giving you Digitrax's position-tracking feature on the same board. At just 1.0" × 0.4" × 0.16", it fits in cabooses, passenger cars, lightboards, and even N-scale shells where space is tight.

Looking for more DCC decoders and electronics? Browse our DCC Decoders and Electronics & Wiring collections.

• One DCC-controllable function output with full transponding (Digitrax position-tracking) built in — no separate transponder board needed.
• 1A continuous, 2A peak function output — plenty for headlights, marker lights, rear lights, smoke units, or other accessories.
• Hardwire install with color-coded leads (blue common, white function, red & black track) — works in HO, N, O, S, and G with appropriate wire gauge.
• Full CV programming including FX3 lighting effects (Mars, Gyralite, Strobe, Random Flicker, Soft On/Off, etc.).
• SuperSonic silent-running operation — no audible motor whine.
• Compatible with all DCC systems following NMRA standards.

What is "transponding"?
Transponding is Digitrax's position-tracking technology — the TL1 reports its location back to your command station through compatible Digitrax detection sections, so you can see exactly where a transponding-equipped car or locomotive is on your layout. It's not the same as RailCom but serves a similar role.

Does this drive a motor?
No — the TL1 is a function-only decoder. It controls ONE output (typically a light or accessory). For motor control you need a full mobile decoder like the Digitrax DH126MT, DZ126, or any other mobile decoder.

What can I wire to the function output?
LEDs (with appropriate resistor), incandescent bulbs, smoke units, sound modules, ditch lights, mars lights, or any DC-powered accessory drawing under 1A continuous. FX3 effects let you simulate prototypical lighting patterns.

Will it work with any DCC system?
Yes — the TL1 follows NMRA DCC standards and runs on any DCC command station. Transponding readback, however, requires a Digitrax LocoNet system with appropriate detection sections (BDL168, BDL16, etc.).