All Products

The Decoder Buddy Mini was developed to fit into smaller steam and diesel applications.  there has also been interest in HOn3 and S-Gauge applications. This mother board does not include the 21 Pin Decoder. This mother board requires soldering. These printed circuit board is  NOT INTENDED FOR USE IN A DC SYSTEM. Included with board are four axial resistors to be mounted remotely inline and are sized for LEDs. (2.2K) The mother board includes:  One 21 Pin Decoder receptacle Two pairs of track input pads One pair of motor input pads One set of stay alive pads (U+ , GND and if necessary a third control wire ) One pair of speaker pads Resistors for use with LED lighting. (separate axial 2.2K)  (Also available with 0 ohm, 750 ohm and custom specified resistors for function outputs. This accommodates some previously installed and "12 volt LEDs".)  It is IMPORTANT to realize that resistors must be used when LEDs are connected to the four lighting outputs of the Mini!!!  The resistors may be soldered in line when purchased or the included resistors may be soldered inline upon installation.  Remember there are different incandescent lamp voltage requirements and current draw that have to be taken into consideration also. (Until the next batch is produced the Mini will be labeled Tiny and the picture on the package will indicate the correct headlight outputs for direction of locomotive.)

Read more less

Wax adhesive for holding miniatures in place whilst allowing re-positioning. Easily remove with warm water and soap. 28 grams

Read more less

The TSU-2200 is a versatile Digital Sound Decoder that is suitable for a wide variety of models from HO to S scale. You will feel like you are in the cab with the amazing new features that Tsunami2 has to offer including: Reactive Dynamic Digital Exhaust, Functioning locomotive and train brakes, injectors, power reverse, and firebox flicker. We also offer a large selection of selectable sound effects including: exhaust chuffs (10), prime movers (up to 12), bells (12), Whistles (90), airhorns (40+), couplers, dynamos and more! This 2-amp, universal-style format, and includes a connector to easily add a CurrentKeeper (P.N. 810140) to maintain performance over dirty track and switches. Product Specifications: Sound Profile: ALCO Diesel Dimensions: 35 x 18 x 6mm Max. Motor Stall Current: 2A Max. Function Current: 100mA (each output) Function Outputs: 6 Audio Amplifier: 2 Watt, 8-Ohm Load DCC Track Voltage: 7.5V – 22V Sound Channels: 16

Read more less

The Rail Tracker cleaning tool actually follows the track and hugs the rail while you clean. This tool makes it easy to clean hard-to-reach areas like inside tunnels, around structures and under power lines. Kit includes all you need to clean and maintain your track. Package doubles as a tray for storage. Replacement pads available. Designed to work on N, HO, HOn3 and three-rail O scale track. Kit includes: Rail Tracker Rail Tracker Handle Clean Track Solution™ - 0.85 fl oz (25.1 mL) 2 Maintenance Pads 2 Rescue Pads™ 4 Cleaning Pads 4 Finishing Pads Instructions

Read more less

Create underwater features with Deep Pour Water and Water Undercoats for submerged water scenes or to imitate depth. Create any Murky aquatic ecosystem and add Surface Waters for the illusion of water movement and undeniable realism. Deep Pour Water dries hard and won't crack, is non-shrinking, and will not become discolored over time. Murky Water is translucent up to 1/2" pours. Contents make 12 fl oz (354 mL) This product cannot be shipped to internationally.

Read more less

CD-Quality Sound: TCS’ world-renowned CD-quality sound. 16 Bits of resolution at 44.1kHz sample rate. Keep-Alive®: Included on-board for smooth, stutter-free operation. Back EMF Load Compensation: Provides superior slow speed control and high performance under load. Quiet Drive: Super-quiet motor control for “buzz” free motor performance. Variable Momentum: Allows you to make custom acceleration and deceleration curves. Incandescent Bulb Support: This decoder can be used with 12 Volt bulbs. Function Remapping: Buttons 0 through 12 may be used to control the lighting functions of this decoder. Programmable Lighting Effects: Choose from 20 separate user-programmable lighting effects! Dimmable Brightness: Configure multiple different brightness levels for your LED’s or incandescent bulbs. Decoder Lock: Feature which prevents accidental/unwanted programming while activated. Airwire™ Compatible: Fully compatible with Airwire™ operation. Audio Assist®: TCS exclusive auditory feedback programming system. Program your decoder without the need to memorize CV’s! User-Loadable Speed Tables: Configure custom speed curves and set speed limits. Throttle Modes: Choose from multiple throttle modes to meet your operating needs. Proto Notch™: A WOWSound original feature which uses TCS’ exclusive auto-adjusting BEMF technology to automatically choose the active notch sound. Prototype Mode also offers dynamic sound volumes which accurately model the real-life equivalent. Also includes pre-programmed acceleration and deceleration values.   Specs Interface Type: Hard-Wire, Direct-Plug (9-Pin JST) Dimensions (L x W x H): 1.35″ x 0.658″ x 0.22″ or 34.29mm x 16.72mm x 5.59mm Scale: HO Scale Continuous/Peak: 1.3/2.0 Amp Total Functions: 6 Function Rating: 100 mA 12V Outputs: 6   Speaker Selection This decoder is optimized for 8 Ω speakers (not included). This decoder uses and audio amplifier capable of supplying up to 2 Watts of power. A 1 Watt minimum power rating is recommended for use with this decoder. If you are using a speaker with less than 1 Watt power rating, you must reduce your volume to prevent speaker failure or amplifier stress. Speaker enclosures greatly increase speaker performance in most cases.

Read more less

Easily adapt any SoundTraxx 21PNEM decoder to an NMRA 9-Pin DCC “quick plug” equipped model. This adapter can also be used with SoundTraxx 9-Pin JST power harness (STX810069) to create a universal-style decoder. Dimensions: 22.5 x 16 x 7.5mm Support for up to 8 functions Solder Pads for CurrentKeeper, speaker connections and extra lights

Read more less

Blunami will change the way you enjoy the model railroading hobby! The Blunami BLU-4408The BLU-4408 is designed to wirelessly operate models with higher stall currents such as some S, O, and large scale locomotives; this decoder features easy-to-use terminal blocks for no-fault wiring and a higher audio amplifier for awesome volume, indoors or out. Blunami decoders can be operated in three different ways: DC, DCC and Wireless mode. Using the Blunami app (iOS versions 8 or later), you can operate your locomotive with incredible ease of use. You will feel like you are in the cab with the amazing new features that Tsunami2 has to offer including: Reactive Dynamic Digital Exhaust, Functioning locomotive and train brakes, injectors, power reverse, and firebox flicker. We also offer a large selection of selectable sound effects including: exhaust chuffs(10), prime movers (up to 12), bells (12), Whistles (90), airhorns (40+), couplers, dynamos and more! DYNAMIC DIGITAL EXHAUST For added realism, you’ll love our reactive Dynamic Digital Exhaust (DDE) feature. When your locomotive is traveling across flat terrain and simply maintaining speed, you will hear your locomotive chugging along. But, when the locomotive encounters a grade and the engineer applies more throttle to get the train up the hill, the engine sounds will automatically react and reflect the increase of power needed to crest the hill. DDE accomplishes this by calculating the changes in strain or load on the motor and adjusting the exhaust to appropriately simulate the work the engineer would be doing to the throttle of the engine. This gives Tsunami2 the ability to create the most realistic experience possible.HIGH QUALITY SOUND LIBRARYOur large selection of high quality sound effects include:  10 Exhaust Chuffs Up to 12 Prime Movers in each sound profile  Up to 12 Bells  90 Whistles 40+ Airhorns Additional couplers, dynamos, cab chatter and more! ADDED REALISMAdditional realism can be simulated by adding functioning locomotive and train brakes, injectors, power reverse, firebox flicker and more. EASY INSTALLATIONNo soldering required! This decoder features easy-to-use terminal blocks for no-fault wiring. This 4-amp, universal-style format decoder includes a connector to easily add a CurrentKeeper (P.N. 810140 or 810160) to maintain performance over dirty track and switches. Dimensions: 69 x 30.5 x 14mm  Max. Motor Stall Current: 4A Max. Function Current: 400mA (each output) Function Outputs: 8 Audio Amplifier: 3 Watt, 8-Ohm Load DCC Track Voltage: 7.5V – 26V Sound Channels: 16   Blunami Owner's Manual Blunami Installation Guide Blunami Steam User's Guide Blunami Diesel User's Guide Blunami Electric User's Guide   Blunami Sound Selection References: Blunami Steam-2 Sound Selection Reference Blunami EMD Sound Selection Reference Blunami EMD-2 Sound Selection Reference Blunami GE Sound Selection Reference Blunami ALCO Sound Selection Reference Blunami Baldwin & Others Sound Selection Reference Blunami Electric Sound Selection Reference   Blunami Sound Samples Blunami Steam-2 Sounds Blunami EMD Blunami EMD-2 Sounds Blunami GE Sounds Blunami ALCO Sounds Blunami Baldwin & Other Diesel Sounds Blunmai Electric Sounds SoundTraxx A true pioneer in the model train industry, SoundTraxx has been creating innovative products for the discriminating model railroader since 1990. We proudly design and manufacture our industry-best products right here in the USA, and our friendly customer support staff work side-by-side with the rest of our product team.

Read more less

The foam protects your locomotives and cars upside down or right side up. You can work on them and not damage the paint or details. For O (& some G) Scale models Dimensions: 8"w x 16"

Read more less

Model tall grasses. Natural product, realistic color. Grass is 2 1/2" (6.35 cm) in length. Model Tall Grasses Natural Product Realistic Color 8 grams (0.28 oz) Grass length: 2 1/2″ (6.35 cm) Color may vary from actual product

Read more less

Use with Extension Wire to create custom lengths of Just Plug Cables. Reach Hubs anywhere on your layout or project.

Read more less

Water Ripples goes on clear and dries clear to create ripples. Customize your water colors by adding Water Tints or create whitecaps and foamy water with White Water Highlight™.

Read more less