All

Mix and blend versatile and compatible products to realistically recreate natural color variances, contrasts and highlights. Easy-to-use products give modelers the results they expect. 57.7 in3 (945 cm3)

Read more less

If you grew up in Brooklyn in the 50s or even if you're just a Robert DeNiro fan... you already know who "Tony" is!This is without-a-doubt one of our most favorite kits. From a city street to a railroad track, you can locate this baby in just about any location. Approx. footprint 5" x 9Kit features precision laser-cut parts and complete instructions for easy assembly.

Read more less

TRAIN-11 LI-ION  Battery 18.5V / 6.0Ah Great for "dead rail" model railroad installations in locomotive (most likely G-scale or LGB) or trailing power cars. Approximate Dimensions: 3.65" x 1.50 x 2.85" Weight: 1.05lb Connector: 20AWG JST SM Max Continuous Discharge: 6A Overdischarge protection: Yes Overcharge protection: Yes Recommended Charge Current: 1A Short Circuit Protection: Yes Please fully charge battery prior to storage. Batteries should be charged every 3 months during periods of storage. 

Read more less

MTO TRAIN-09 LI-ION Battery 14.8V / 3.0Ah Great for "dead rail" model railroad installations in locomotive (may work in some HO scale applications, G-scale or LGB) or trailing power cars.   Approximate Dimensions: 1.47" x 1.65 x 2.67"Weight: .45lbConnector: 20AWG JST SMMax Continuous Discharge: 6AOverdischarge protection: YesOvercharge protection: YesRecommended Charge Current: 1AShort Circuit Protection: YesPlease fully charge battery prior to storage. Batteries should be charged every 3 months during periods of storage.

Read more less

Squeaky’s Trains – HO Scale – 8ft Temporary Concrete Barriers Our “Jersey” Temporary Concrete Barriers are HO scale accurate, 100% exclusive and only available from Squeaky’s Trains. Each and every barrier goes through an inspection to insure the best quality possible. Condition: New Scale: HO Scale Accurate Sizes Length: 1.15" / 29.3mm Height:  0.35″ / 9.0mm Width: 0.31″ / 8.0mm Design: Exclusive 3D model designed by Squeaky’s Trains Manufacture: 3D printed with high quality materials Finish/Color: Painted & Unpainted Notes: Vehicles, coin, or other props not included.  Looking to purchase in bulk? Contact us for pricing.

Read more less

Stainless Steel Coupler & Special Purpose TweezersNormally closed tweezers are that extra hand you need. The auto clamping design of these tweezers make holding small parts effortless. Ideal for assembly couplers and gearboxes.The notch end of the tweezers fits nicely over trip pin to hold coupler parts together and when used in conjunction with the Kadee® Coupler Assembly Fixture. For use with HOn3 to On3 Scale Package Includes: (1) Coupler & Special Purpose Tweezers

Read more less

#205 Metal Muti-Purpose Coupler Height Gauge - HO ScaleIncludes the No.5® Coupler & #58 Scale Coupler - Kit. EASY TO ASSEMBLE & USE A must have tool for gauging correct coupler height, trip pin, and permanent uncoupler heights for achieving trouble free coupler performance. Also has a built in HO track gauge. "Takes the guess work out" Four tools in one.1. Provides instant visual reference of proper coupler height.2. Accurately measures proper trip pin height above rail.3. Built-in track gauge. (N.M.R.A. Standard)4. Movable dowel tests Kadee® Magne-Matic® Uncoupler height and registers the needed adjustments. NOTE: The #205 gauge is not insulated and "only" should be used on a nonpowered track or track with the electrical power completely switched off.Track not included Package Includes: (1) each No.®5 Coupler (1) each #58 Coupler (1) each #205 Height Gauge Base (uncolored) (10) each .015 Red Fiber Washers (2) each #622 Knuckle Springs (2) each #625 Knuckle Springs (1) each 2-56 x 3/8" Screw

Read more less

#309 Under-the-Ties Delayed-Action Electric Uncoupler Kit - HO Scale Kadee® #165 Red - Normally Open momentary contact push button switches are recommend. Fits any HO code track. This package contained one HO Scale Magne-Electric electromagnetic, delayed action uncoupler kit, ready to assemble and install Under-the-Ties. It can be installed on any straight layout track, but especially on mainlines, were false uncoupling my occur. Fits any HO code track. Operates: 16 volt DC. We recommend a 16 volt DC power source (at least 3 Amps) or 18 volt AC power source (at least 3 Amps)converted to DC with bridge rectifier. WARNING: Do not use the uncoupler continually. DO NOT activate the uncoupler for longer than 2 MINUTES at one time.This will avoid possible overheating which will damage the uncoupler. (Track Not Included) Package Includes: (1) Each Coil (1) Each Steel core (4) Each Field plates (1) Each Field plate divider (1) Each Upper track mounting plate (1) Each 10-32 x 7/8" Bolt (1) Each 10-32 Nut (3) Each 2 x 3/8" flat head self-tapping screws (4) Each 0-48 x 1/4" screws (4) Each 0-48 x 3/8" screws (1) Each Bridge Rectifier (1) Each Capacitor Recommended Accessories: 3 Amp Push button momentary switch SPST - Normally Open (Kadee #165) Light bulb - 14-20 Volts, .2 Amp #20 AWG Wire- insulated, strand in two color codes Rosin Core Solder - 1/16" size Track Section, 3 1/2" long Roadbed Section, 2 1/8" long Metal Rail Joiners Ballast   Recommended Tools: Power or Crank Drill - with 1/4" bit 1/4" Drill #52 Drill (Kadee #780 Tap & Drill set) #55 Drill (Kadee #780 Tap & Drill set) Reg. Screwdriver - with 1/8" head Modeler's Knife Razor Saw Flat Chisel, 1/2" Medium Tooth File - 1/2" wide Household Pliers Soldering Iron White Glue Fine Tooth File - 1/2" wide

Read more less

#520 - 33" Diameter Smooth Back Wheelsets (Code 110) - HO Scale Smooth wheelsets are most commonly found on diesel era rolling stock. Kadee® wheel sets are manufactured to the most exacting standards and feature: RP-25 contour, non-magnetic metal wheels and insulated needlepoint axles. Twelve Sets (1 Set = 1 Axle) Axle Tip to Tip: 1.018" Wheelset Features: Code 110 (.110") 33" Smooth Back Wheels Accurate markings Incredible detail true to prototype Non-magnetic Metal Wheels Smooth tracking Free rolling Contoured Insulated Axles RP-25 Free rolling wheels Needlepoint Axles Axle Tip to Tip: 1.018" Freight & Passenger Package Includes: (12) Sets #520 33" Diameter Smooth Back Wheelsets (Code 110)   The term Code 110 and Code 88 relates to the width of the wheels and has no relationship to track code. Code 110 wheels are .110" wide and Code 88 are .088" wide. Code 110 wheels are the common (or "Standard") width wheels and Code 88 are what is called "Semi-Scale" and are used when the modeler wants a more prototypical looking wheel width. Actual HO-Scale prototypical wheel width would be around .067" wide and although they will run OK on the average track they will not go through common turnouts and crossings. Code 88 (.088") is just about the minimum width of wheel that will run on most standard or common track if gauged correctly. It really is a matter of appearances because there's very little operational differences between running Code 110 or Code 88 wheels. Code 88 wheels look really good and are most noticeable on open frame cars like hoppers and tank cars. However, they also look great on boxcars, gondolas, and reefers but not quite as noticeable. As mentioned above track code and wheel code have no relationship meaning Code 110 and Code 88 will run on most any code of track. Track code is simply the measured height of the rail, code 100 is .100" tall, code 83 is .083" tall, code 70 is .070" tall, and so on.

Read more less

The #156 "Scale" All Metal Self-Centering WHISKER® Coupler features a "Scale" Metal Coupler (a smaller head coupler which is more to scale and is patterned after the type 'E" couplers) & Metal WHISKER® Centering Spring, insulated Draft Gear Box and Lid. The #156 Coupler may be mounted with the supplied #242 draft gear box, other Kadee® HO-Scale draft gear box shown below or with the Manufacturers cast-on coupler pockets. The coupler will couple and uncouple with other Kadee® HO and HOn3 couplers. The coupler has the same shank length as the #26, 36 or 46 coupler which will allow the modeler to remove the existing #26, 36 or 46 coupler and replace with the new smaller coupler. The #156 coupler is made of the same metal as the #46 for strength and rigidity. It is not recommended to use a metal coupler directly on a metal surface or in a metal draft gearbox to avoid possible electrical crossover and shorting that may cause damage. Use the provided insulated gearbox. Refer to our helpful Coupler Conversion Charts to determine the appropriate coupler to use on your model. HO-Scale Package Includes: (2) Pair #156 Scale Whisker® Metal Couplers - Long Centerset Shank (2) Pair #242 Snap-Together Gearboxes (2) #625 Knuckle Springs #156 Scale Whisker® Metal Coupler Features: Material  -   Metal Shank Length  -  Long (25/64") (center hole to back of coupler head) Coupler Offset  -  Centerset Knuckle Spring  -   #625 Centering System  -   Whisker® Head  -   Scale Head Works In Place of  -   #26, #36 (#146 in a #252 box), long centerset "clone" couplers Works With  -   #213, #232, #234, #242, #252, #262, manufacturer cast-on draft gearboxes #242 Snap-Together Gearbox Features: Material  -   Insulated Plastic Lid Type  -   Snap-Together Dimensions  -   7/16"L x 5/16"W x 1/8"H Works With  -   NO.5®, #58, 20-Series and 40-Series, All Whisker® Couplers Mounting Specifications: Mounting Height  -   25/64" Centerline  -   25/64" Trip Pin Height  -   1/32" Center Hole  -   2-56 Insulated Screws are the most commonly used. (Screw length will vary) Recommended Tools: #206 Insulated Muti-Purpose Coupler Height Gauge #231 Greas-em Dry Graphite Lubricant #237 Coupler Trip Pin Pliers #240 Double Headed Pin Vise #241 Dual Tool Manual Uncoupling Tool and Spring Pick #246 Tap (2-56) and Drills (#50 and #43)

Read more less

This industry leading coupler features an all metal coupler head, shank, and Whisker® centering spring and comes complete with insulated draft gearbox and lid. The #146 Magne-Matic® Whisker® Metal Coupler may be mounted with the included #242 Snap-Together Gearbox or with other manufacturers cast-on coupler pockets. It is not recommended to use a metal coupler directly on a metal surface or in a metal draft gearbox to avoid possible electrical crossover and shorting that may cause damage. Use the provided insulated gearbox or insulated #26 coupler. HO-Scale Package Includes: (2) Pair #146 Whisker® Metal Couplers - Long Centerset Shank (2) Pair #242 Snap-Together Gearboxes (2) #622 Knuckle Springs #146 Whisker® Metal Coupler Features: Material  -   Metal Shank Length  -   Long (25/64") (center hole to back of coupler head) Coupler Offset  -   Centerset Knuckle Spring  -   #622 Centering System  -   Whisker® Head  -   Standard Head Works In Place of  -   #26, #36 (#146 in a #252 box), long centerset "clone" couplers Works With  -   #213, #232, #234, #242, #252, #262, manufacturer cast-on draft gearboxes #242 Snap-Together Gearbox Features: Material  -   Insulated Plastic Lid Type  -   Snap-Together Dimensions  -   7/16"L x 5/16"W x 1/8"H Works With  -   NO.5®, #58, 20-Series and 40-Series, All Whisker® Couplers Mounting Specifications: Mounting Height  -   29/64" Centerline  -   25/64" Trip Pin Height  -   1/32" Center Hole  -   2-56 Insulated Screws are the most commonly used. (Screw length will vary) Recommended Tools: #206 Insulated Muti-Purpose Coupler Height Gauge #231 Greas-em Dry Graphite Lubricant #237 Coupler Trip Pin Pliers #240 Double Headed Pin Vise #241 Dual Tool Manual Uncoupling Tool and Spring Pick #246 Tap (2-56) and Drills (#50 and #43)

Read more less

A PBM can be added to a HO model train locomotive so that if the model train wheels loose connection from the track because of dirty track or other problems, the Power Backup Module will supply power to the Locomotive Module for up to many seconds to keep operating properly without sounds, lights, or even motor stopping! What is special about the RaiPro PBM is that the PBM is an active power backup not a passive one like many other power backups. Many others are basically just super capacitors that the voltage drops exponentially as soon as the power is removed. With other backups, lights continually dim and module performance is effected. Our PBM has onboard microcontroller and other electronics that will output a fixed voltage similar to a good power supply output so lights stay constant while PBM is active and locomotives perform better. Product Specifications: Connection 2-wire Dimensions: 1.27 x 0.66 x 0.32 in DCC Track Voltage: 12.6V – 16V     Approximate Run time lights only: ~18 SecondsApproximate Run time lights and sounds: ~14 SecondsApproximate Run time lights, sounds, and pulling a train:Varies greatly depending on locomotive, speed, load etc. PBM Frequently Asked Questions What is the most important aspect of a power backup module? In our opinion, the most important aspect of a PBM is its ability to power a locomotive pulling a train across dead track. Our PBM works so well that one of our locomotives pulled twelve cars across thirty inches of dead track without stopping while the lights and sounds were on! We tested some other super capacitor only power backup products that only covered a small fraction of the distance and were as large as our PBM! If the most important aspect is powering the locomotive pulling a train, why is there so many others that show or talk about the time the lights stay on? Powering a train can take many times the power then to just have light and/or sounds on because the motor can use much more power than powering the lights and/or sounds. We have seen super capacitor only designs that have real long light on time but when you try to pull a train the results were very poor. One product we tested had many seconds of light and/or sound on time but when pulling a train it died in less than 0.2 seconds! This is why we think many talk about or show light on time because it makes their products look better than they may perform when actually pulling a train. Do I have to use a PBM in all my locomotives for them to run well? NO. If your layout is powered by a RailPro power supply, you have quality locomotives, your layout is properly wired, and you do a reasonable job of keeping your track and locomotive wheels clean, you can have a good running layout without PBMs. So who does Ring Engineering sell PBMs for if some RailPro customers do not really need them? There are many RailPro customers that run on other peoples layouts (like at train clubs) and they cannot control how clean or maintained the track is. There are some RailPro customers that do clean their track regularly but just want extra insurance to be sure they get the best operation possible. Is it ok to use other companies power backup like devices with RailPro locomotive modules? No. Ring Engineering products should only be used as described in their user manuals. The LM user manuals do not say it is ok to connect super capacitors. Using our products in a way not in compliance with our user manuals will void the warranty of the Ring Engineering product and may cause serious problems. There is no public specification on how to design power backup units so there is no guarantee of compatibility. We believe that some regular super capacitor designs have been used with RailPro LM modules and damaged the RailPro modules. If you want power backup you should only use a Ring Engineering PBM with your RailPro locomotive modules. If a power backup has more Farads of super capacitors is it better? Not necessarily. The amount of capacitance (Farads) is only one factor and may not be a real good one when trying to compare one power backup to another. There are other important features to consider besides capacitance. For example a one Farad device can be a lot better than a two farad device. The two farad device may allow lights to run longer but not be able to power a moving train well. There is simply a lot more to it then simply comparing how much capacitance a backup device has built into it. Made In USA

Read more less