$100 to $250

This new speaker module fits wherever 20mm x 40mm rectangular speakers were previously installed. With the help of the built-in passive radiator in conjunction with a high-performance rectangular speaker, the module achieves significantly improved bass reproduction and achieves a considerable sound pressure even in the highs and mids. The module is particularly suitable for diesel or steam locomotives where contemporary bass reproduction is important. The speaker fits perfectly with our LokSound 5 micro, LokSound 5 or LokSound 5 L decoders. More Information Item # 50347 Brand ESU Scale HO, O & G MSRP 17.99 WARNING: This product can expose you to a chemical, which is known to the State of California to cause Cancer and Reproductive Harm - For more information go to www.P65Warnings.ca.gov

Read more less

This loudspeaker module is suitable for large tenders with gauge H0 or OO or models with gauge 0. Its built-in passive radiator, in conjunction with the built-in broadband speaker, results in good bass reproduction without neglecting the highs and mids. Especially for diesel or steam locomotives, this module is a real alternative for those who like deep bass but don't need extreme volume. The speaker fits perfectly with our LokSound 5 or LokSound 5 L decoders. More Information Item # 50346 Brand ESU Scale HO, O & G MSRP 17.99 WARNING: This product can expose you to a chemical, which is known to the State of California to cause Cancer and Reproductive Harm - For more information go to www.P65Warnings.ca.gov

Read more less

SoundTraxx Blunami decoders will change the way you enjoy the model railroading hobby. They operate in DC, DCC, or wireless mode with the free Blunami App. The Blunami BLU-21PNEM8The BLU-21PNEM8 is a 1-amp Digital Sound Decoder with 8 function outputs. It is designed for easy plug-in operation when mated to a 21-pin NEM connector. You will feel like you are in the cab with the amazing new features that Blunami has to offer including: Reactive Dynamic Digital Exhaust, Functioning locomotive and train brakes, injectors, power reverse, and firebox flicker. We also offer a large selection of selectable sound effects including: exhaust chuffs (10), prime movers (up to 12), bells (12), Whistles (90), airhorns (40+), couplers, dynamos, and more! Need Help Choosing a Sound Profile?We have tons of sounds to match a wide range of locomotives. So many, in fact, we cannot fit them all on one decoder. Therefore, they are broken up into sound profiles of like sounds (Steam, EMD, GE, Electric, etc.). If you don't know which sound profile you need, the best place to start is the Sound Selection References. These will list all the prime movers or exhaust chuffs available on each sound profile. If you need further assistance explore these links:  Decoder Selector: Tells you which board format and part number you need for specific models. Sound Samples: Hear SoundTraxx sounds in action!

Read more less

The Digitrax UR93 Duplex Radio Transceiver is a multi-scale solution for model train enthusiasts. With its advanced technology and reliable performance, this transceiver allows for effortless control of multiple trains on a single layout. Enjoy the convenience and precision of a duplex radio system with the Digitrax UR93. UR93 Features: Digitrax Duplex Radio Transceiver on LocoNet wire infrastructure (no IR support). More than double the radio range of UR92 Duplex units. Improved multi-path performance for cluttered layouts. Plug and Play setup, PS14 Universal power supply included. Compatible to be mixed with UR92 LocoNet Duplex Radio systems, for added coverage and improved reception. Status LEDS. Supports combinations of DT602D/DE and DT500D, DT402D and UT4D Duplex Radio throttles. UR93E available for countries that require EN-300-328 Wireless conformity. More Information Item # UR93 Brand Digitrax MSRP $27.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Specification Sheet / Instruction Sheet

Read more less

Dual Stationary Decoder for Bi-polar, Snap Switches or Slow Motion Machines DS52 Features: Simple hook up and set up. Control 2 individual turnout machines.2 Slow motion turnout machines, such as Tortoise™ by Circuitron or Switchmaster™.OR2 Solenoid type turnout machines such as three wire Peco or Atlas Snap Switches or two wire bi-polar type turnout machines such as Kato Unitrack, AristoCraft, or LGB turnouts with powerful capacitive discharge capability. Turnout addresses can be set individually or in groups of 2. Screw terminals make installation easy! DCC compatible. Screw terminals make installation and set up easy. Control 2 solenoid type turnout machines: 2 wire bi-polar (Kato Unitrack Switches, etc.) and/or 3 wire (Peco, Atlas Snap Switches, etc.) Addresses can be independent or sequential All Scales up to 22V track power. More Information Item # DS52 Brand Digitrax Scale Multi Scale MSRP $28.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Specification Sheet / Instruction Sheet

Read more less

SwitchPilot 3 decoders are optimized for stationary use on your system and can switch conventional double coil switch drives, light signals, magnetic uncouplers, light bulbs or other stationary consumption.In order to facilitate the rather cumbersome configuration of magnetic article decoders, the SwitchPilot 3 has an innovative operating concept consisting of a 4-line, illuminated OLED display and three input buttons. Modes The SwitchPilot 3 is multi-protocol and can be used with workstations according to the Märklin® Motorola® system (e.g. 6021, Central Station® or Mobile Station®) as well as DCC-enabled control panels. The configuration can take place on both the main track and the programming track. Thanks to RailCom®, CVs can also be read out. Functioning The SwitchPilot 3 can be supplied directly from the digital system or from an external DC or change voltage source. It has a total of 8 transistor outputs, which are grouped in the 4 exit pairs 1 to 4. Each output pair contains two outputs (OutA and OutB) and can be configured individually for the desired use case:In pulse mode, the output is switched on as soon as a switching command is received. The fact that the output automatically switches off again as soon as the time stored in the decoder has elapsed prevents the burning of magnetic article drives.At the moment (K83-compatible) the output remains active as long as the button on the control panel is pressed. This operating mode is suitable for turnout drives with final shutdown or for de-caps.In bi-stable continuous operation (k84-compatible), the two outputs are switched on and off: When pressing the first button (red) on the control panel, the output Out A is switched on. It remains active until pressing the assigned button (green) activates the output Out B of the same output group. Out A and Out B behave like a change switch.In alternating flasher mode, the outputs Out A and Out B of an output pair are switched on alternately with an adjustable flashing frequency. The change indicator is started with the command "Ge- rade/Green" of the assigned button and stopped again with the command "Branching/Red".Optionally, the output can also be slowly dimmed and dimmed (so-called "zoom" for glow lam pen simulation).With the switch 3 mode switch, you can switch all output pairs together to the "k83" or "k84" modes at lightning speed, regardless of how they are configured. Feedback Since the SwitchPilot 3 is RailCom®-capable, all settings can be read out and changed directly in the built-in state on request. In combination with an ECoS as an ideal "partner", the SwitchPilot 3 can record and display the actual turnout setting with appropriately prepared turnout drives. Finally, you have the certainty that your switch has switched correctly! Set The SwitchPilot 3 can be flexibly adjusted either on the programming track with DCC control panels or on the main track with POM ("Programming on Main") or can also be read out via RailCom® CVs. On request, he also learns the addresses directly via a programming button. The easiest way to set is, of course, with the integrated OLED display and the three input buttons: All (!) Settings can be checked directly on the decoder and changed on request. A"Programming" with the help of your control panel is not required. It really can't be any easier. The ESU LokProgrammer can be used for firmware updates. Protection As with our locomotive decoders, the outputs of the SwitchPilot 3 are largely protected against overload. We want you to enjoy your decoder for as long as possible. More Information Item # 51840 Brand ESU Scale Multi WARNING: This product can expose you to a chemical, which is known to the State of California to cause Cancer and Reproductive Harm - For more information go to www.P65Warnings.ca.gov

Read more less

NEM652 8-Pin Interface Version The LokPilot 5 DCC is the "twin brother" of the LokPilot 5. The two share almost all characteristics, however, the LokPilot 5 DCC is a pure DCC decoder and cannot be used on analog AC systems. This lack of flexibility comes with a cheaper price. LokPilot 5 decoders are offered with all common interfaces.  Modes The LokPilot 5 DCC is a "pure-bred" DCC decoder. 14 to 128 speed steps are as natural as 2- and 4-digit addresses. Up to 32 functions can be triggered. Thanks to RailComPlus® the decoders register automatically with a suitable DCC system like the ESU CabControl. The decoder accepts all DCC programming modes and thanks to RailCom® the CV values ​​can be read on the main track with RailCom equipped DCC systems. For command stations that only program the CVs from 1-255 auxiliary CV registers exist. The LokPilot 5 DCC decoder recognizes the Märklin® braking sections as well as the ZIMO® HLU / ZACKCommands or the Lenz® ABC system. Also braking with DCC brake modules or with DC voltageis possible. It also stops with a Selectrix® brake diode. An ABC automatic shuttle trainenables automatic commuting between two train stations. The LokPilot 5 DCC decoder can be used on analog DC trains. The top speedcan be set separately. The decoder switches between the operating modes fully automatically "on-the-fly". Features We know that you want your locomotives to be as realistic as possible. Therefore we have the LokPilot 5DCC packed with function outputs. Depending on the interface version, each LokPilot offers 5 DCCDecoder at least 10 amplified function outputs with 250mA output current each. In the executionswith PluX22 or 21MTC interface there are 4 outputs to control servos orLogic level outputs added. All-important lighting functions are available. The brightness of each outputcan be set separately. The decoder masters automatic pushing and pullingwhen uncoupling for ROCO®, Krois® and Telex® couplings. Motor control The engine control of the LokPilot 5 DCC has been fundamentally improved again. A variably adjustablePWM clock frequency from 10kHz to 50kHz ensures super quiet operation, especially with bell-armature motors.Operation - The typical “hum” is a thing of the past. The load control now has up to10 CVs  which can be adjusted for difficult cases. The unique "Autotune" function enablesthe automatic calibration of the decoder to the motor. The LokPilot 5 DCC decoder delivers up to 1.5A of motor current. Enough juice even for older motors. Operational safety On request, a PowerPack can be fitted to the LokPilot 5 DCC to bridge dirty rail sections. Protection Of course, all function outputs and the motor output are protected against overload. We want you to enjoy your decoder for as long as possible. More Information Item # 59620 Brand ESU Scale HO & O WARNING: This product can expose you to a chemical, which is known to the State of California to cause Cancer and Reproductive Harm - For more information go to www.P65Warnings.ca.gov

Read more less

By default, this decoder does not come with a pre-programmed Sound Profile. Nevertheless, we provide complimentary Sound File programming for all ESU decoders. Please be aware that opting for Sound File Programming in your order might result in a shipment delay of 1 to 2 business days. Visit this link to preview ESU Sounds With its unique design the LokSound 5 Direct DCC can easily replaceboards that provide poor motor control, low volume, or generally inferiorsound. Not only will the decoder work fine with most factory installedspeakers, but it will sound even better with our new 11x15mm“sugar cube” speaker and sound enclosure kits. Modes The LokSound 5 DCC is made for the North American and Australianmarkets. It is a pure DCC Decoder, which supports RailComPlus and canalso be used on DC layouts. With its size of 0.67x2.72inch/17x69mmThe V5 Direct DCC will fit in almost all of the popular North Americanand Australian HO manufacutrers locomotives. In the DCC format, 14 to 128 speed steps are as natural as 2- and4-digit addresses and up to 32 functions. Thanks to RailComPlus®, thedecoders log on fully automatically to a suitable digital central unit. It masters all DCC programming modes and, thanks to RailCom®, theCV values on the main track can be read out with suitable controlpanels. For panels that can only program the CVs from 1-255, thereare auxiliary registers. Braking with DCC brake modules or DC voltage is also possible. Anautomatic ABC shuttle allows automatic commuting between two stations. The LokSound 5 decoder can also be used on analog DC tracks. Sound The LokSound 5 decoder can play up to 10 channels simultaneously.Each channel can be resolved with up to 16 bit / 31250 kHz and finallyoffers hi-fi quality on your system. There is virtually no difference tothe original more audible. A Class D audio power amplifier with upto 3W output powers the speakers, which may have between 4 ohmsand 32 ohms impedance. The huge 128 Mbit sound storage providesenough capacity. All individual sounds can be individually adjusted in volume. The superflexible Sound engine without rigid schedule allows the prototypicalsimulation of all imaginable locomotives. Three separately adjustablebraking functions and two alternative load scenarios give you the maximumcontrol over your Locos. Features We know that you want your locomotives to be as realistic as possible.That’s why we packed the LokSound 5 with function outputs.Depending on the interface version, each LokSound 5 decoder offersat least 8 amplified function outputs. Of course tons of lighting effectsare also available. The brightness of each output can be set separately.The decoder handles the automatic on and off during uncoupling forROCO®, Krois® and Telex® couplings. In order to keep compatiblewith the thousands of LokSound Selects and LokSound V4 decodersalready on the market we made sure to add many of the most popularfeatures of that Generation! This Includes the Full Throttle features,including the Famous Drive Hold! Motor Control The engine control of the LokSound 5 has again been fundamentallyimproved. A variably adjustable PWM clock frequency of 10kHzto 50kHz ensures especially in bell armature motors for a super quietoperation - The typical “humming” is a thing of the past. The loadcontrol can now be adapted to difficult cases with up to 10 CVs. Theunique “Autotune” function allows the automatic decompression ofthe decoder to the motor. The LokSound 5 decoder delivers up to 1.5A motor current enoughjuice for older engines. More Information Item # 58821 Brand ESU Scale HO WARNING: This product can expose you to a chemical, which is known to the State of California to cause Cancer and Reproductive Harm - For more information go to www.P65Warnings.ca.gov

Read more less

Enjoy complimentary shipping! Bundle your purchases for even more savings with our free shipping option. (This offer is optional) Providing enough steam to power train heat and some air conditioning systems on postwar trains taxed the standard water supply of EMD F7 A units set-up for passenger service, prompting EMD to roll out the new FP7 in 1949. Though outwardly similar to the F7A, FP7s were actually four feet longer to accommodate bigger water tanks with a capacity of 950 US gallons. Standard passenger power into the Amtrak era and beyond (with some also handling freight chores), these WalthersProto replicas are fully assembled and ready for service with: One time run of these roadnumbers, order now - limited quantity available! Matches the prototypes' extended frame and body Railroad-specific details Five-pole, skew-wound, high-torque, high-efficiency can motor Helical gears with 14:1 ratio for smooth, ultra-quiet running Easy multiple-unit operation Correct RP-25 wheelsets Proto MAX(TM) magnetic metal knuckle couplers Road-specific details of this WalthersProto replica include: A unit details - Nathan M5 Air horn w/all bells forward Whip-style radio antenna w/conduit Freight pilot Knob-style sand hatch doors Late water filler Cab wind deflectors Etched-metal cab sunshades Standard type winterization hatch Vertical body louvers Photo-etched Farr vertical grilles Dual headlights - upper single, lower twin vertical More Information Item # 920-49546 Brand WalthersProto Scale HO Engine Electronics DC, DCC Ready Type EMD Diesel Road Name Chesapeake & Ohio Road Number 8005 & 8505 Estimated Release Date June 2024

Read more less

Power your HO railroad's flagship streamliners with these superb replicas of EMD's famed E8 and E9 diesels. Introduced in 1948 with the new 567B prime mover, production contiued until 1954 when the virtually identical E9 was introduced with the more powerful 567C prime mover. Powerful, reliable and economical, EMD E units handled premiere long-distance trains for decades, with many ending their long careers in commuter service and ocassionally handling fast freight trains. Fully assembled and ready for service, features include: One time run of these roadnumbers, order now - limited quantity available! Road- and era-specific details Rugged and reliable WalthersProto drive 21-pin DCC plug Formed wire grab irons and handrails Photo-etched lift rings Cab interior w/seats and figures All-wheel drive and electrical pickup Constant and directional LED lights Correct size RP-25 metal wheels Proto MAX(TM) metal knuckle couplers Road-specific features of this WalthersProto replica include: Nathan five-chime (all forward) air horn Single horizontal sealed-beam headlight Working backup light Flush number boards Removed skirts Freight pilot Southern-style MU bracket 4-hose MU set at left and right Photo-etched E8A-style Farr air grilles Dynamic brake with 48" fan Winterization hatches w/levers Single offset steam generator Rooftop air reservoirs w/piping Round spark arrestors Rectangular air vent Roller bearing sideframes Wheel slip hubs Speed recorder Southern-style left and right water tanks More Information Item # 920-49922 Brand WalthersProto Scale HO Engine Electronics DC / DCC Ready Type EMD Diesel Road Name Southern Road Number 6900

Read more less

Whether you're looking for a getaway in the woods or a home with some country appeal, the Rustic Cabin is the perfect place to sit back and relax in a rocking chair. The Rustic Cabin features old board and batten siding, a covered porch and shake shingle roof. Two rocking chairs on the porch provide a convenient location to watch a sunrise, and a milk can sits off to the side. Additional features include a pile of wood to prepare for cold nights, a wood stove pipe, a bent TV antenna, and an electric meter on the back of the cabin. This Built-&-Ready Landmark Structure comes with a pre-installed LED porch light made for use with the Just Plug Lighting System. 20mA RoHS Compliant Colors may vary from actual product. More Information Item # BR4955 Brand Woodland Scenics Scale N Type Assembled Building Availability In-Stock/Restockable TCA Grading C-10 Mint - Brand New

Read more less

Bring your engine terminal to life with this Cornerstone Two-Stall 130' Brick Diesel House. Typical of shop buildings constructed from the 1930s on especially to repair and maintain diesels, structures like this can still be found at many terminals. Based on Milwaukee Road prototype, this engine house looks great in any diesel-era servicing scene and is adaptable to other industrial scenes. The Two-Stall 130' Brick Diesel House is one of many Cornerstone N Scale railroad buildings. Prototypes in service from 1930s to the present Must-have for major engine terminals and backshops Slotted base accepts popular rail sizes Easy-to-build plastic kit Molded in four appropriate colors and clear plastic Main Building: 10-3/4 x 6-3/4 x 3-1/4" 27.3 x 17.1 x 8.2cm Office: 3-1/8 x 1-5/8 x 1-1/4" 7.9 x 4.1 x 3.1cm More Information Item # 933-3266 Brand Walthers Cornerstone  Scale N Type Building Kit Size 10-3/4 x 6-3/4 x 3-1/4" or 27.3 x 17.1 x 8.2cm Availability In-Stock/Restockable TCA Grading C-10 Mint - Brand New Instruction Sheet View/Download

Read more less