$100 to $250

Power your favorite Amtrak(R) or regional commuter trains in style with a WalthersMainline F40PH on the job! Built especially for passenger duties, the prototypes entered service in 1976 and many are still going strong today. Based on Phase 2b prototypes, the models feature: One time run of these roadnumbers, order now - limited quantity available Factory-installed vertical hand rails Molded drill starter points for grab irons (sold separately) RP-25 metal wheels Proto MAX(TM) metal knuckle couplers Fully assembled 21mtc connector ESU Sound for DCC and DC layouts featuring: - 4 function outputs with brightness control by CV- Fully DCC compatible- 14, 28, 128 speed steps- Dual mode DC and DCC- 4 air horns changeable by CVs- 2 bells changeable by CVs- Full 8-notch prime mover sounds- Compressor- Dynamic brake Same powerful drive as WalthersProto(R) locos featuring - Five-pole skew-wound motor- 14:1 gear ratio- Helical-cut gears for quiet operation and easy multiple unit operation- All-wheel drive and electrical pickup- Heavy die-cast metal chassis- Constant and directional LED lights PLEASE NOTE: When operating Walthers-branded DCC-equipped locomotives in DC mode, do not use power packs that exceed an 18V rating. This includes MRC 1300-series power packs which have known issues with our decoders. Alternate horns and bell sounds can be programmed on the sound decoder using these CVs:Horns: CV163 = 0 - Nathan K5LH (default)CV163 = 1 - Nathan K5HLLCV163 = 2 - Nathan K5HCV163 = 3 - Nathan K5LLABells: CV164 = 0 - Graham White E-Bell (default)CV164 = 1 - GE Steel Bell

Read more less

Power your favorite Amtrak(R) or regional commuter trains in style with a WalthersMainline F40PH on the job! Built especially for passenger duties, the prototypes entered service in 1976 and many are still going strong today. Based on Phase 2b prototypes, the models feature: One time run of these roadnumbers, order now - limited quantity available Factory-installed vertical hand rails Molded drill starter points for grab irons (sold separately) RP-25 metal wheels Proto MAX(TM) metal knuckle couplers Fully assembled 21mtc connector Same powerful drive as WalthersProto(R) locos featuring: - Five-pole skew-wound motor - 14:1 gear ratio - Helical-cut gears for quiet operation and easy multiple unit operation - All-wheel drive and electrical pickup - Heavy die-cast metal chassis - Constant and directional LED lights

Read more less

Power your favorite Amtrak(R) or regional commuter trains in style with a WalthersMainline F40PH on the job! Built especially for passenger duties, the prototypes entered service in 1976 and many are still going strong today. Based on Phase 2b prototypes, the models feature: One time run of these roadnumbers, order now - limited quantity available Factory-installed vertical hand rails Molded drill starter points for grab irons (sold separately) RP-25 metal wheels Proto MAX(TM) metal knuckle couplers Fully assembled 21mtc connector Same powerful drive as WalthersProto(R) locos featuring: - Five-pole skew-wound motor - 14:1 gear ratio - Helical-cut gears for quiet operation and easy multiple unit operation - All-wheel drive and electrical pickup - Heavy die-cast metal chassis - Constant and directional LED lights

Read more less

From coach and freight yards to primary power for shortlines, the WalthersMainline SW7 is a perfect choice for your HO layout! Delivering 1200-horsepower from an updated 567A prime mover, the prototypes proved popular with both railroads and industrial lines, with nearly 500 produced in just two years from 1949 to 1951, with several still in service, each layout-ready model is packed with features including: One time run of these roadnumbers, order now - limited quantity available Used by dozens of railroads and industrial lines for switching, local and branch line service with several preserved today! - Phase One body as appropriate with arched front cab windows and louvered radiator cover for units built from 1949 to 1950 - Phase Two body as appropriate with straight front cab windows and wire grille radiator cover for units built from 1950 to 1951 - Dual tall conical exhaust stacks - Large front radiator grille - Single straight hood to cab transition - 6 louvered side doors with letterboard gap - Factory-installed grab irons on hood and cab - With or without footboards as appropriate - 4 styles of headlights to match prototype practice as appropriate: * Original large single * Retrofit horizontal dual * Retrofit dual vertical * Dual sealed beam Same powerful drive as WalthersProto(R) locos featuring: - Five-pole skew-wound motor - 14:1 gear ratio - Helical-cut gears for quiet operation and easy multiple unit operation - All-wheel drive and electrical pickup - Heavy die cast metal chassis - Constant and directional LED headlights Next18 DCC Plug Correct size RP-25 metal wheels Proto MAX(TM) metal knuckle couplers

Read more less

Available for Special Order only Ships as soon as product arrives! Estimated Time: 1 - 2 Weeks Building on the success of the era-defining Dash 8 series, the General Electric-built Dash 9 is recognized as one of the most popular freight locomotives in modern history. Packing 4,400 horsepower, the Dash 9 has seen service with almost all class-one railroads, and can still be found leading priority road freights across North America. Don’t miss the opportunity to add this essential example of modern railroading to your Large Scale layout. Factory-equipped with DC control, the model features operating lights, exhaust smoke, and a plug-and-play circuit board for the addition of the control system of your choice.   advanced nonproprietary plug-and-play circuit board to accommodate the control system of your choice, including conventional DC power, NMRA/NEM DCC, and/or RC operation 1:29 scale, 45mm gauge performs best on 10’ diameter curves or greater  two three-axle ball-bearing power trucks two motors per truck with low amperage draw operating diesel smoke unit white LED directional headlights and ditch lights lighted front number boards interior cab lighting and interior cab detail lighted porch, walkway, and step lights solid-metal railings and lift rings opening side windows engineer figure in cab windshield wipers, see-through steps, and MU hose detailing operating AAR knuckle couplers extra weight for better performance factory-installed speaker with wire pigtail to allow for easy installation of aftermarket sound power cables on each end to allow for battery operation or RC control from trailing car length: 32”

Read more less

Moving large HO loads will be easy with these WalthersMainline 68' Bulkhead Flatcars! Used by Trailer Train / TTX and other railroad owners, features of the models include: One time run of these road numbers, order now - limited quantity available! Based on Bethlehem BSH71A Cars Prototypes introduced in 1979-80 and still built today Used by TTX and railroad owners to handle sheet steel, crated and tarped cargo, building materials and other large loads Detailed nailable "steel" floor "Steel" bulkhead sheets Detailed brake equipment Die-cast metal underframe for outstanding performance loaded or empty 100-ton trucks with correct 36" turned metal RP-25 wheels Proto MAX metal knuckle couplers  PLEASE NOTE - As these cars are the correct prototype length and feature detailed underbodies, a minimum radius of 24" is suggested.

Read more less

Moving large HO loads will be easy with these WalthersMainline 68' Bulkhead Flatcars! Used by Trailer Train / TTX and other railroad owners, features of the models include: One time run of these road numbers, order now - limited quantity available! Based on Bethlehem BSH71A Cars Prototypes introduced in 1979-80 and still built today Used by TTX and railroad owners to handle sheet steel, crated and tarped cargo, building materials and other large loads Detailed nailable "steel" floor "Steel" bulkhead sheets Detailed brake equipment Die-cast metal underframe for outstanding performance loaded or empty 100-ton trucks with correct 36" turned metal RP-25 wheels Proto MAX metal knuckle couplers  PLEASE NOTE - As these cars are the correct prototype length and feature detailed underbodies, a minimum radius of 24" is suggested.

Read more less

Moving large HO loads will be easy with these WalthersMainline 68' Bulkhead Flatcars! Used by Trailer Train / TTX and other railroad owners, features of the models include: One time run of these road numbers, order now - limited quantity available! Based on Bethlehem BSH71A Cars Prototypes introduced in 1979-80 and still built today Used by TTX and railroad owners to handle sheet steel, crated and tarped cargo, building materials and other large loads Detailed nailable "steel" floor "Steel" bulkhead sheets Detailed brake equipment Die-cast metal underframe for outstanding performance loaded or empty 100-ton trucks with correct 36" turned metal RP-25 wheels Proto MAX metal knuckle couplers  PLEASE NOTE - As these cars are the correct prototype length and feature detailed underbodies, a minimum radius of 24" is suggested.

Read more less

Moving large HO loads will be easy with these WalthersMainline 68' Bulkhead Flatcars! Used by Trailer Train / TTX and other railroad owners, features of the models include: One time run of these road numbers, order now - limited quantity available! Based on Bethlehem BSH71A Cars Prototypes introduced in 1979-80 and still built today Used by TTX and railroad owners to handle sheet steel, crated and tarped cargo, building materials and other large loads Detailed nailable "steel" floor "Steel" bulkhead sheets Detailed brake equipment Die-cast metal underframe for outstanding performance loaded or empty 100-ton trucks with correct 36" turned metal RP-25 wheels Proto MAX metal knuckle couplers  PLEASE NOTE - As these cars are the correct prototype length and feature detailed underbodies, a minimum radius of 24" is suggested.

Read more less

Moving large HO loads will be easy with these WalthersMainline 68' Bulkhead Flatcars! Used by Trailer Train / TTX and other railroad owners, features of the models include: One time run of these road numbers, order now - limited quantity available! Based on Bethlehem BSH71A Cars Prototypes introduced in 1979-80 and still built today Used by TTX and railroad owners to handle sheet steel, crated and tarped cargo, building materials and other large loads Detailed nailable "steel" floor "Steel" bulkhead sheets Detailed brake equipment Die-cast metal underframe for outstanding performance loaded or empty 100-ton trucks with correct 36" turned metal RP-25 wheels Proto MAX metal knuckle couplers  PLEASE NOTE - As these cars are the correct prototype length and feature detailed underbodies, a minimum radius of 24" is suggested.

Read more less

Moving large HO loads will be easy with these WalthersMainline 68' Bulkhead Flatcars! Used by Trailer Train / TTX and other railroad owners, features of the models include: One time run of these road numbers, order now - limited quantity available! Based on Bethlehem BSH71A Cars Prototypes introduced in 1979-80 and still built today Used by TTX and railroad owners to handle sheet steel, crated and tarped cargo, building materials and other large loads Detailed nailable "steel" floor "Steel" bulkhead sheets Detailed brake equipment Die-cast metal underframe for outstanding performance loaded or empty 100-ton trucks with correct 36" turned metal RP-25 wheels Proto MAX metal knuckle couplers  PLEASE NOTE - As these cars are the correct prototype length and feature detailed underbodies, a minimum radius of 24" is suggested.

Read more less

Moving large HO loads will be easy with these WalthersMainline 68' Bulkhead Flatcars! Used by Trailer Train / TTX and other railroad owners, features of the models include: One time run of these road numbers, order now - limited quantity available! Based on Bethlehem BSH71A Cars Prototypes introduced in 1979-80 and still built today Used by TTX and railroad owners to handle sheet steel, crated and tarped cargo, building materials and other large loads Detailed nailable "steel" floor "Steel" bulkhead sheets Detailed brake equipment Die-cast metal underframe for outstanding performance loaded or empty 100-ton trucks with correct 36" turned metal RP-25 wheels Proto MAX metal knuckle couplers  PLEASE NOTE - As these cars are the correct prototype length and feature detailed underbodies, a minimum radius of 24" is suggested.

Read more less