$25 to $50

Mix and blend versatile and compatible products to realistically recreate natural color variances, contrasts and highlights. Easy-to-use products give modelers the results they expect. 57.7 in3 (945 cm3)

Read more less

Mix and blend versatile and compatible products to realistically recreate natural color variances, contrasts and highlights. Easy-to-use products give modelers the results they expect. 57.7 in3 (945 cm3)

Read more less

Tap 2-56 and Drills #50 and #43 Set

Read more less

Pin Vise Double headed pin vis Metal double headed/ended pin vise with double reversible collets at each end. Collets have four different size openings. Package Includes: (1) Mark V Gripper metal 5-prong jaw

Read more less

#531 - 36" Diameter Ribbed Back Wheelsets (Code 88) - HO Scale Ribbed wheelsets are most commonly found on steam era rolling stock. Kadee® wheel sets are manufactured to the most exacting standards and feature: RP-25 contour, non-magnetic metal wheels and insulated needlepoint axles. Twelve Sets (1 Set = 1 Axle) Axle Tip to Tip: 1.018" Wheelset Features: Code 88 (.088") 36" Ribbed Back Wheels Accurate markings Incredible detail true to prototype Non-magnetic Metal Wheels Smooth tracking Free rolling Contoured Insulated Axles RP-25 Free rolling wheels Needlepoint Axles Axle Tip to Tip: 1.018" Freight & Passenger Package Includes: (12) Sets #531 36" Diameter Ribbed Back Wheelsets (Code 88)   The term Code 110 and Code 88 relates to the width of the wheels and has no relationship to track code. Code 110 wheels are .110" wide and Code 88 are .088" wide. Code 110 wheels are the common (or "Standard") width wheels and Code 88 are what is called "Semi-Scale" and are used when the modeler wants a more prototypical looking wheel width. Actual HO-Scale prototypical wheel width would be around .067" wide and although they will run OK on the average track they will not go through common turnouts and crossings. Code 88 (.088") is just about the minimum width of wheel that will run on most standard or common track if gauged correctly. It really is a matter of appearances because there's very little operational differences between running Code 110 or Code 88 wheels. Code 88 wheels look really good and are most noticeable on open frame cars like hoppers and tank cars. However, they also look great on boxcars, gondolas, and reefers but not quite as noticeable. As mentioned above track code and wheel code have no relationship meaning Code 110 and Code 88 will run on most any code of track. Track code is simply the measured height of the rail, code 100 is .100" tall, code 83 is .083" tall, code 70 is .070" tall, and so on.

Read more less

#521 - 36" Diameter Ribbed Back Wheelsets (Code 110) - HO Scale Ribbed wheelsets are most commonly found on steam era rolling stock. Kadee® wheel sets are manufactured to the most exacting standards and feature: RP-25 contour, non-magnetic metal wheels and insulated needlepoint axles. Twelve Sets (1 Set = 1 Axle) Axle Tip to Tip: 1.018" Wheelset Features: Code 110 (.110") 36" Ribbed Back Wheels Accurate markings Incredible detail true to prototype Non-magnetic Metal Wheels Smooth tracking Free rolling Contoured Insulated Axles RP-25 Free rolling wheels Needlepoint Axles Axle Tip to Tip: 1.018" Freight & Passenger Package Includes: (12) Sets #521 36" Diameter Ribbed Back Wheelsets (Code 110)   The term Code 110 and Code 88 relates to the width of the wheels and has no relationship to track code. Code 110 wheels are .110" wide and Code 88 are .088" wide. Code 110 wheels are the common (or "Standard") width wheels and Code 88 are what is called "Semi-Scale" and are used when the modeler wants a more prototypical looking wheel width. Actual HO-Scale prototypical wheel width would be around .067" wide and although they will run OK on the average track they will not go through common turnouts and crossings. Code 88 (.088") is just about the minimum width of wheel that will run on most standard or common track if gauged correctly. It really is a matter of appearances because there's very little operational differences between running Code 110 or Code 88 wheels. Code 88 wheels look really good and are most noticeable on open frame cars like hoppers and tank cars. However, they also look great on boxcars, gondolas, and reefers but not quite as noticeable. As mentioned above track code and wheel code have no relationship meaning Code 110 and Code 88 will run on most any code of track. Track code is simply the measured height of the rail, code 100 is .100" tall, code 83 is .083" tall, code 70 is .070" tall, and so on.

Read more less

Rectifier Kit Converts AC or DC track current to polarized DC current suitable for LED lighting and other electronic devices that require DC current. Includes: 1 Rectifier 1A 400V, 1 Capacitor 47UF 35V, 1 Fuse Holder 2AG Block 300V, 1 Fuse 250mA 250V 2AG 1 Each Kadee HO Pickup Truck Trouble Shooting Important!One side of each bronze electrical pickup is marked with a red dot. This red dot indicates the side that picks up the current from the track. When installing the Pickup Trucks on your rolling stock These marks MUST be on opposite rails otherwise an electrical short will occur and the Pickup Trucks may be damaged!   Problems: Possible Cause: Possible Solution: Flickering Lights Dirty Track & Wheels   Clean Track & Wheels   Poor connection in wiring Check all wiring connections Insufficient connection betweenbronze pickups and axles Check that bronze pickup fingersare touching axle Capacitor needed A capacitor may be needed tostabilize voltage. (see Kadee HOPickup Truck Wiring Diagram) Derailments Uneven pickup tension on axles  Check that all bronze pickupshave equal tension against axle Crooked or kinked pickup wire Check that pickup wire is notbinding where it protrudesthrough the floor of the car

Read more less

This industry leading coupler features an all metal coupler head, shank, and Whisker® centering spring and comes complete with insulated draft gearbox and lid. The #149 Magne-Matic® Whisker® Metal Coupler may be mounted with the included #242 Snap-Together Gearbox or with other manufacturers cast-on coupler pockets. It is not recommended to use a metal coupler directly on a metal surface or in a metal draft gearbox to avoid possible electrical crossover and shorting that may cause damage. Use the provided insulated gearbox or insulated #29 coupler. HO-Scale Package Includes: (2) Pair #149 Whisker® Metal Couplers - Long Overset Shank (2) Pair #242 Snap-Together Gearboxes (2) #622 Knuckle Springs #149 Whisker® Metal Coupler Features: Material  -   Metal Shank Length  -   Long (25/64") (center hole to back of coupler head) Coupler Offset  -   Overset Knuckle Spring  -   #622 Centering System  -   Whisker® Head  -   Standard Head Works In Place of  -   #29, #39 (#149 in a #252 box), Long Overset "clone" couplers Works With  -   #213, #232, #234, #242, #252, #262, manufacturer cast-on draft gearboxes #242 Snap-Together Gearbox Features: Material  -   Insulated Plastic Lid Type  -   Snap-Together Dimensions  -   7/16"L x 5/16"W x 1/8"H Works With  -   NO.5®, #58, 20-Series and 40-Series, All Whisker® Couplers Mounting Specifications: Mounting Height  -   1/2" Centerline  -   25/64" Trip Pin Height  -   1/32" Center Hole  -   2-56 Insulated Screws are the most commonly used. (Screw length will vary) Recommended Tools: #206 Insulated Muti-Purpose Coupler Height Gauge #231 Greas-em Dry Graphite Lubricant #237 Coupler Trip Pin Pliers #240 Double Headed Pin Vise #241 Dual Tool Manual Uncoupling Tool and Spring Pick #246 Tap (2-56) and Drills (#50 and #43)

Read more less

This industry leading coupler features an all metal coupler head, shank, and Whisker® centering spring and comes complete with insulated draft gearbox and lid. The #143 Magne-Matic® Whisker® Metal Coupler may be mounted with the included #242 Snap-Together Gearbox or with other manufacturers cast-on coupler pockets. It is not recommended to use a metal coupler directly on a metal surface or in a metal draft gearbox to avoid possible electrical crossover and shorting that may cause damage. Use the provided insulated gearbox or insulated #23 coupler. HO-Scale Package Includes: (2) Pair #143 Whisker® Metal Couplers - Short Centerset Shank (2) Pair #242 Snap-Together Gearboxes (2) #622 Knuckle Springs #143 Whisker® Metal Coupler Features: Material  -   Metal Shank Length  -   Short (1/4") (center hole to back of coupler head) Coupler Offset  -   Centerset Knuckle Spring  -   #622 Centering System  -   Whisker® Head  -   Standard Head Works In Place of  -   #23, #33 (#143 in a #252 box), Short Centerset "clone" couplers Works With  -   #213, #232, #234, #242, #252, #262, manufacturer cast-on draft gearboxes #242 Snap-Together Gearbox Features: Material  -   Insulated Plastic Lid Type  -   Snap-Together Dimensions  -   7/16"L x 5/16"W x 1/8"H Works With  -   NO.5®, #58, 20-Series and 40-Series, All Whisker® Couplers Mounting Specifications: Mounting Height  -   29/64" Centerline  -   25/64" Trip Pin Height  -   1/32" Center Hole  -   2-56 Insulated Screws are the most commonly used. (Screw length will vary) Recommended Tools: #206 Insulated Muti-Purpose Coupler Height Gauge #231 Greas-em Dry Graphite Lubricant #237 Coupler Trip Pin Pliers #240 Double Headed Pin Vise #241 Dual Tool Manual Uncoupling Tool and Spring Pick #246 Tap (2-56) and Drills (#50 and #43)

Read more less

This industry leading coupler features an all metal coupler head, shank, and Whisker® centering spring and comes complete with insulated draft gearbox and lid. The #141 Magne-Matic® Whisker® Metal Coupler may be mounted with the included #242 Snap-Together Gearbox or with other manufacturers cast-on coupler pockets. It is not recommended to use a metal coupler directly on a metal surface or in a metal draft gearbox to avoid possible electrical crossover and shorting that may cause damage. Use the provided insulated gearbox or insulated #21 coupler. HO-Scale Package Includes: (2) Pair #141 Whisker® Metal Couplers - Long Underset Shank (2) Pair #242 Snap-Together Gearboxes (2) #622 Knuckle Springs #141 Whisker® Metal Coupler Features: Material  -   Metal Shank Length  -   Long (25/64") (center hole to back of coupler head) Coupler Offset  -   Underset Knuckle Spring  -   #622 Centering System  -   Whisker® Head  -   Standard Head Works In Place of  -   #21, #31 (#141 in a #252 box), long underset "clone" couplers Works With  -   #213, #232, #234, #242, #252, #262, manufacturer cast-on draft gearboxes #242 Snap-Together Gearbox Features: Material  -   Insulated Plastic Lid Type  -   Snap-Together Dimensions  -   7/16"L x 5/16"W x 1/8"H Works With  -   NO.5®, #58, 20-Series and 40-Series, All Whisker® Couplers Mounting Specifications: Mounting Height  -   25/64" Centerline  -   25/64" Trip Pin Height  -   1/32" Center Hole  -   2-56 Insulated Screws are the most commonly used. (Screw length will vary) Recommended Tools: #206 Insulated Muti-Purpose Coupler Height Gauge #231 Greas-em Dry Graphite Lubricant #237 Coupler Trip Pin Pliers #240 Double Headed Pin Vise #241 Dual Tool Manual Uncoupling Tool and Spring Pick #246 Tap (2-56) and Drills (#50 and #43)

Read more less

This industry leading coupler features plastic standard coupler with metal knuckle, and #634 standard centering spring and comes complete with insulated draft gearbox and lid. The#28 Magne-Matic® Metal Coupler may be mounted with the included #213 or #232 Gearbox or with most other manufacturers cast-on coupler pockets. The #28 Coupler is the plastic equivalent to the NO.5® Metal Coupler. It is not recommended to use a metal coupler directly on a metal surface or in a metal draft gearbox to avoid possible electrical crossover and shorting that may cause damage. HO-Scale Package Includes: (2) Pair #28 Plastic Shank Couplers - Medium Centerset Shank (2) Pair #634 Centering Spring NO.5® Style (2) Pair 055" ID & .100" ID Bushing/Sleeves (2) Pair #212 Talgo Truck Adaptors (2) Pair #213 Gearboxes (2) Pair #232 Gearboxes (2) #622 Knuckle Springs #28 Plastic Coupler Features: Material  -   Metal Knuckle, Plastic Coupler Shank Shank Length  -   Medium (19/64") (center hole to back of coupler head) Coupler Offset  -   Centerset Knuckle Spring  -   #622 Centering System  -   Standard Shank Centering Spring  -   #634 Centering Spring NO.5® Style Head  -   Standard Head Works In Place of  -   NO.5®, #58, #118, #119, #148, #158, most medium centerset "clone" couplers Works With  -   #213, #232, #234, #242, most manufacturer cast-on draft gearboxes #212 Talgo Truck Adaptors: Material  -   Insulated Plastic Works With  -   NO.5®, #58, 20-Series and all Whisker® Couplers #213 Plastic Draft Gearboxes: Material  -   Insulated Plastic Dimensions  -   25/64"L x 5/16"W x 3/32"H Works With  -   NO.5®, #58, 20-Series and all Whisker® Couplers #232 Plastic Draft Gearboxes & Lids Features: Material  -   Insulated Plastic Dimensions  -   29/64"L x 19/64"W x 7/64"H Works With  -   NO.5®, #58, 20-Series and all Whisker® Couplers #28 with a #212 Talgo Truck Adaptor. Mounting Specifications: Centerline  -   25/64" Trip Pin Height  -   1/32" #28 in a #213 monted on bottom. Mounting Specifications: Mounting Height  -   29/64" Centerline  -   25/64" Trip Pin Height  -   1/32" Center Hole  -   2-56 Insulated Screws are the most commonly used. (Screw length will vary) #28 in a #213 monted on top. Mounting Specifications: Mounting Height  -   23/64" Centerline  -   25/64" Trip Pin Height  -   1/32" Center Hole  -   2-56 Insulated Screws are the most commonly used. (Screw length will vary) #28 in a #232 Mounting Specifications: Mounting Height  -   29/64" Centerline  -   25/64" Trip Pin Height  -   1/32" Center Hole  -   2-56 Insulated Screws are the most commonly used. (Screw length will vary) Side Holes  -   0-48 Self-Tapping or 0-80 Machine Screws. (Screw length will vary) Recommended Tools: #206 Insulated Muti-Purpose Coupler Height Gauge #230 Talgo Adaptor Insertion Pic #231 Greas-em Dry Graphite Lubricant #237 Coupler Trip Pin Pliers #240 Double Headed Pin Vise #241 Dual Tool Manual Uncoupling Tool and Spring Pick #246 Tap (2-56) and Drills (#50 and #43) #780 Tap (0-80) and Drills (#55 and #52)

Read more less

This industry leading coupler features plastic standard coupler with metal knuckle, and #634 standard centering spring and comes complete with insulated draft gearbox and lid. The#27 Magne-Matic® Metal Coupler may be mounted with the included #213 or #232 Gearbox or with most other manufacturers cast-on coupler pockets. It is not recommended to use a metal coupler directly on a metal surface or in a metal draft gearbox to avoid possible electrical crossover and shorting that may cause damage. HO-Scale Package Includes: (2) Pair #27 Plastic Shank Couplers - Medium Underset Shank (2) Pair #634 Centering Spring NO.5® Style (2) Pair 055" ID & .100" ID Bushing/Sleeves (2) Pair #212 Talgo Truck Adaptors (2) Pair #213 Gearboxes (2) Pair #232 Gearboxes (2) #622 Knuckle Springs #27 Plastic Coupler Features: Material  -   Metal Knuckle, Plastic Coupler Shank Shank Length  -   Medium (9/32") (center hole to back of coupler head) Coupler Offset  -  Underset Knuckle Spring  -   #622 Centering System  -   Standard Shank Centering Spring  -   #634 Centering Spring NO.5® Style Head  -   Standard Head Works In Place of  -  #147, medium underset "clone" couplers Works With  -   #213, #232, #234, #242, most manufacturer cast-on draft gearboxes #212 Talgo Truck Adaptors: Material  -   Insulated Plastic Works With  -   NO.5®, #58, 20-Series and all Whisker® Couplers #213 Plastic Draft Gearboxes: Material  -   Insulated Plastic Dimensions  -   25/64"L x 5/16"W x 3/32"H Works With  -   NO.5®, #58, 20-Series and all Whisker® Couplers #232 Plastic Draft Gearboxes & Lids Features: Material  -   Insulated Plastic Dimensions  -   29/64"L x 19/64"W x 7/64"H Works With  -   NO.5®, #58, 20-Series and all Whisker® Couplers #27 with a #212 Talgo Truck Adaptor. Mounting Specifications: Centerline  -   25/64" Trip Pin Height  -   1/32" #27 in a #213 monted on bottom. Mounting Specifications: Mounting Height  -  25/64" Centerline  -   25/64" Trip Pin Height  -   1/32" Center Hole  -   2-56 Insulated Screws are the most commonly used. (Screw length will vary) #27 in a #213 monted on top. Mounting Specifications: Mounting Height  -   19/64" Centerline  -   25/64" Trip Pin Height  -   1/32" Center Hole  -   2-56 Insulated Screws are the most commonly used. (Screw length will vary) #27 in a #232 Mounting Specifications: Mounting Height  -   25/64" Centerline  -   25/64" Trip Pin Height  -   1/32" Center Hole  -   2-56 Insulated Screws are the most commonly used. (Screw length will vary) Side Holes  -   0-48 Self-Tapping or 0-80 Machine Screws. (Screw length will vary) Recommended Tools: #206 Insulated Muti-Purpose Coupler Height Gauge #230 Talgo Adaptor Insertion Pic #231 Greas-em Dry Graphite Lubricant #237 Coupler Trip Pin Pliers #240 Double Headed Pin Vise #241 Dual Tool Manual Uncoupling Tool and Spring Pick #246 Tap (2-56) and Drills (#50 and #43) #780 Tap (0-80) and Drills (#55 and #52)

Read more less