All

1517 products


  • SoundTraxx 882004 | Econami ECO-PNP Diesel (2-amp) Digital Sound Decoder SoundTraxx 882004 | Econami ECO-PNP Diesel (2-amp) Digital Sound Decoder

    SoundTraxx SoundTraxx 882004 | Econami ECO-PNP Diesel (2-amp) Digital Sound Decoder

    9 reviews

    The 2-amp Econami ECO-PNP universal-style Digital Sound Decoder is suitable for a wide variety of models from HO to S scale. This decoder includes a connector to easily add a CurrentKeeper (P.N. 810140) to maintain performance over dirty track and switches. Product Specifications: Sound Profile: Diesel Dimensions: 74 x 17 x 5mm Max. Motor Stall Current: 2A Max. Function Current: 100mA (each output) Function Outputs: 6 Audio Amplifier: 2 Watt, 8-Ohm Load DCC Track Voltage: 7.5V – 22V Sound Channels: 12

    £54.40

  • Squeaky's Trains #43 | HO Scale Rerailer | 2 Pack Squeaky's Trains #43 | HO Scale Rerailer | 2 Pack

    Squeaky's Trains Squeaky's Trains #43 | HO Scale Rerailer | 2 Pack

    7 reviews

    3D Printed HO Scale Rerailer’s uniquely created by Squeaky’s Trains & Things. Condition: New Quantity: 2 Pack, long and short rerailers. Design: Exclusive 3D model designed by Squeaky’s Trains Manufacture: 3D printed with high quality materials Scale: HO Scale (Long) Length: 8.85″ / 22.5cm Width: 1.23″ / 31.4mm Height: 0.40″ / 10mm Scale: HO Scale (Short) Length: 5.83″ / 14.8cm Width: 1.23″ / 31.4mm Height: 0.40″ / 10mm Notes:  Logo sign, rails and Freight Car not included.

  • SoundTraxx 810140 | CurrentKeeper™

    SoundTraxx SoundTraxx 810140 | CurrentKeeper™

    4 reviews

    The SoundTraxx CurrentKeeper™ is designed to add additional power capacity to any decoder installation. It can be used to overcome dirty track, limited electrical pickup or dead frogs to ensure reliable operation of any locomotive in your fleet. It measures 40 x 6 x 11mm.

    £21.10

  • SoundTraxx 810160 | CurrentKeeperII™ SoundTraxx 810160 | CurrentKeeperII™

    SoundTraxx SoundTraxx 810160 | CurrentKeeperII™

    3 reviews

    Introducing the More Compact CurrentKeeperII! Not all models are made the same, and some are a TIGHT fit for a decoder installation. The CurrentKeeper is now available in two sizes to fit more models and make your installs easier! Keep more of your trains running even over dirty track and switches!  The NEW SoundTraxx CurrentKeeperII™ is designed to add additional power capacity to any decoder installation. It can be used to overcome dirty track, limited electrical pickup or dead frogs to ensure reliable operation of any locomotive in your fleet. It measures 20.1 x 13.2 x 11mm. ● Maintains power to the decoder for up to 6 seconds during electrical interruptions● Compatible with NMRA DCC Standards & Recommended Practices

    £21.10

  • Sale Woodland Scenics 639 | Field System - Static King Static Grass Applicator | Multi Scale Woodland Scenics 639 | Field System - Static King Static Grass Applicator | Multi Scale

    Woodland Scenics Woodland Scenics 639 | Static King Static Grass Applicator - Field System | Multi Scale

    2 reviews

    Static King makes it easy to model large grassy areas and ensures Static Grass is applied vertically. The Static King has an ergonomic design and can be placed upside down for easy filling. It comes with different Sieve sizes for creating a varied effect using 2-12 mm lengths of Static Grass. A divider allows the use of multiple colors and sizes at the same time for modeling realistic fields and other tall grasses. The clear hopper ensures you always know how much Static Grass you have left. Built-in bleed-off function allows it to discharge safely on its own. Power is supplied via a Power Supply or battery.  Indicator light makes it easy to know if the Static King is turned on. Batteries and/or power supply not included, available as Add-On.

    £54.03 - £67.90

  • SoundTraxx 884007 | TSU-2200 Steam-2 Digital Sound Decoder | Tsunami2 2-amp SoundTraxx 884007 | TSU-2200 Steam-2 Digital Sound Decoder | Tsunami2 2-amp

    SoundTraxx SoundTraxx 884007 | TSU-2200 Steam-2 Digital Sound Decoder | Tsunami2 2-amp

    7 reviews

    The TSU-2200 is a versatile Digital Sound Decoder that is suitable for a wide variety of models from HO to S scale. You will feel like you are in the cab with the amazing new features that Tsunami2 has to offer including: Reactive Dynamic Digital Exhaust, Functioning locomotive and train brakes, injectors, power reverse, and firebox flicker. We also offer a large selection of selectable sound effects including: exhaust chuffs (10), prime movers (up to 12), bells (12), Whistles (90), airhorns (40+), couplers, dynamos and more! This 2-amp, universal-style format, and includes a connector to easily add a CurrentKeeper (P.N. 810140) to maintain performance over dirty track and switches. Product Specifications: Sound Profile: Steam-2 Dimensions: 35 x 18 x 6mm Max. Motor Stall Current: 2A Max. Function Current: 100mA (each output) Function Outputs: 6 Audio Amplifier: 2 Watt, 8-Ohm Load DCC Track Voltage: 7.5V – 22V Sound Channels: 16

    £85.78

  • SoundTraxx 810154 | Mini Cube Oval Speaker/Baffle

    SoundTraxx SoundTraxx 810154 | Mini Cube Oval Speaker/Baffle | HO Scale

    1 review

    This tiny speaker comes with a properly proportioned speaker enclosure and provides great results for space-constrained models! Dimensions: 16 x 12 x 11.3mm(D)Frequency Response: 300Hz – 20kHzPower: .7 Watts (Nominal) 1 Watt (Peak)Impedance: 8 Ohms Note: When using this speaker with a decoder that has a two watt amplifier, it must be wired in series with another 1 watt speaker.

    £10.21

  • SoundTraxx 810153 | 28mm (1″) 8-ohm, 2 Watt Round Speaker SoundTraxx 810153 | 28mm (1″) 8-ohm, 2 Watt Round Speaker

    SoundTraxx SoundTraxx 810153 | 28mm (1″) 8-ohm, 2 Watt Round Speaker

    2 reviews

    Suitable for many HO and larger models. Dimensions: 28 x 4.5mm(D)Frequency Response: 320 Hz – 18kHzPower: 1 Watt (Nominal) 2 Watts (Peak)Impedance: 8 Ohms

  • Ring Engineering LM-4S-G | RailPro 'G' Scale Locomotive Module with Sound

    Ring Engineering Ring Engineering LM-4S-G | RailPro 'G' Scale Locomotive Module with Sound | G Scale

    3 reviews

    The LM-4S-G is a module that you can install into a model train locomotive so the locomotive can be controlled and setup by a Ring Engineering RailPro Controller, such as the HC-2 Handheld Controller with a Color Touch Screen! After the LM-4S-G is installed in a locomotive, you will be able to control the locomotive speed, direction, up to 6 light outputs and sounds! The LM-4S-G has “Direct Radio” (RF transceiver) built inside. The built in RF module allows commands and data to be sent and received to and from the module. You can load a picture of your choice into the LM-4S-G module. Then you will be able to touch the screen of the HC-2 to take control of your locomotive! You can even download new sounds and light effects using the built in Direct Radio! Product Specifications: Sound Profile: Universal (all) Dimensions: 3.35 x 1.32 x 0.57 in DCC Track Voltage: 7.5V – 18V Light Outputs 6   Package Contents: LM-4S-G Locomotive Module WH-9 9 Pin Wiring Harness Instruction Sheet The LM-4S-G is equipped with Direct Radio! This allows Ring Engineering Controlling Devices such as the HC-2, Handheld Controller with Color Touch screen, to control and configure your locomotive by sending and receiving data directly to the LM-4S-G through the air by use of RF transmission! The Direct Radio is very fast giving your locomotive quick response to your controls. Further, a controlling device can detect your LM-4S-G with just a few touches on the screen. Because of Direct Radio, you can load a picture of your locomotive to the LM-4S-G! You can also load Sounds, Light Effects and much more!Your LM-4S-G is equipped with Rail Sonic HD Sound System! This is Ring Engineering's technology that allows your LM-4S-G to produce realistic locomotive sounds!Radio Load Sharing is a truly an innovative invention from Ring Engineering. It allows your locomotives that are linked together (sometimes called Consisted or MU'ed) to actually share pulling power. Only RailPro equipped locomotives use Direct Radio to talk to each other to be sure each locomotive pulls its share of the load! Even more amazingly, Ring Engineering's patent pending process only takes seconds to setup!Six light outputs. Can be configured for multiple light effects on a single output including On/Off, Dim, Ditch, Mars, Strobe, and more! Additional light effects can be loaded using DirectRadio!Built in protection with fault reporting by Direct Radio!Tiny size 3.35 x 1.32 x 0.57 Inches for easy fit. Important: If you are running your trains outside be sure to buy the model HC-2-SUN handheld controller instead of the standard model HC-2. The HC-2-SUN is easily readable in sunlight.  The HC-2 screen was designed for indoor use and looks real good inside.  Outside the standard HC-2 screen can look washed out when the sun shines on it.

    £120.07

  • SoundTraxx 885813 | TSU-PNP8 8 Function – Tsunami2 (2-amp) EMD Diesel Sound Decoder SoundTraxx 885813 | TSU-PNP8 8 Function – Tsunami2 (2-amp) EMD Diesel Sound Decoder

    SoundTraxx SoundTraxx 885813 | TSU-PNP8 8 Function – Tsunami2 (2-amp) EMD Diesel Sound Decoder

    2 reviews

    The TSU-PNP8 is a universal factory board replacement sound decoder suitable for use in many manufacturer’s diesel models such as those made by Atlas, Athearn, and InterMountain Models. It is suitable for a wide variety of models from HO to S scale. You will feel like you are in the cab with the amazing new features that Tsunami2 has to offer including: Reactive Dynamic Digital Exhaust, Functioning locomotive brakes, and train brakes. We also offer a large selection of selectable sound effects including: prime movers (up to 12), bells (12), airhorns (40+) and more! This decoder includes a connector to easily add a CurrentKeeper (P.N. 810140) to maintain performance over dirty track and switches.

    £78.74

  • Squeaky's Trains | Temporary Concrete Barriers | HO Scale Squeaky's Trains | Temporary Concrete Barriers | HO Scale

    Squeaky's Trains Squeaky's Trains | Temporary Concrete Barriers | HO Scale

    3 reviews

    Squeaky’s Trains – HO Scale – “Jersey” Concrete Traffic Barriers Our “Jersey” Temporary Concrete Barriers are HO scale accurate, 100% exclusive and only available from Squeaky’s Trains. Each and every barrier goes through an inspection to insure the best quality possible. Condition: New Scale: HO Scale Accurate Sizes Length: See Size Options Height:  0.35″ / 9.0mm Width: 0.31″ / 8.0mm Design: Exclusive 3D model designed by Squeaky’s Trains Manufacture: 3D printed with high quality materials Finish/Color: Unpainted, gray. Notes: Vehicles, coin, or other props not included.  Looking to purchase in bulk? Contact us for pricing.

    £3.98 - £9.58

  • NixTrainz | Decoder Buddy Version 5B (12 Outputs) NixTrainz | Decoder Buddy Version 5B (12 Outputs)

    NixTrainz NixTrainz | Decoder Buddy Version 5B (12 Outputs)

    1 review

    This product is versatile in terms of direction of the placement of the board and mounting in various configurations.  It can easily replace a QSI board, a Dual Mode decoder board or be mounted directly on the electric motor or frame with Kapton tape.  (It is recommended that a piece of Kapton tape be placed on the bottom of the mother board to assure electrical isolation from the electric motor or frame.) This mother board does not include a 21 Pin Decoder. This mother board and connector board require soldering. These printed circuit boards are NOT INTENDED FOR USE IN A DC SYSTEM. The on board resistors are sized for LEDs. (2.2K)  V5 (old) vs V5B (current) The V5 has the capability of easily adding a two wire stay alive.  The U+ and the GND pads are positioned close together and work well.  The three wire stay alive or Power Pack has a third wire that could be connected to pin-1 on the base of the 21-pin connector.  Pin -1 is associated with Aux 10 on a Loksound 5 decoder and used to turn the Power Pack off and on.  It is used frequently but not as easy to solder to as a pad.  I have a video on my Facebook page of the procedure.   The V5B has a dedicated pad for the white control wire of the Power Pack and is labeled "W".  Now there are six pads in the row of soldering pads on the bottom of the board just under the small light connector board in the picture on the right.  They are, right to left; W, U+, GND, A12, A11 and U+.  The other difference is that the "W" pad is connected to pin-2 of the 21-pin connector and the Aux 7 function controls the Power Pack on this board.  It is the default function assigned to the LokSound 5 decoders.  Package Includes: 1x Mother Board 1x Connector Board Dimensions: 0.67" x 2.20" x 0.35" (17 mm x 56 mm x 0.9 mm)The mother board includes;  One 21 Pin Decoder receptacle, Two pairs of track input pads, One pair of motor input pads, One pair of stay alive pads (U+ and GND), Pads for two Aux functions (Version 5 Feature) Two pairs of speaker pads wired in parallel, Resistors for use with LED lighting. (on board 2.2K)  The connector board contains pads for twelve pairs of lighting function connections. U+ or the blue wire has twelve connected pads for the common power source. The negative (-) discrete function pads are all labeled to indicate their connection to the functions available in the decoder. The lighting connector was designed so that the shell of the diesel locomotive can be easily separated from the frame without un-soldering wires. This does require that the headlight and rear lights be mounted in the shell of the locomotive and that the diesel has a removable dynamic brake shell. Incandescent lamps or bulbs are not well suited for the Decoder Buddys or associated decoders.  It can be done but it will require more electronics to achieve a result.  Our recommendation is to go with LEDs.

© 2024 Squeaky's Trains & Things, Powered by Shopify

    • American Express
    • Apple Pay
    • Diners Club
    • Discover
    • Meta Pay
    • Google Pay
    • Mastercard
    • PayPal
    • Shop Pay
    • Venmo
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account