This industry leading coupler features plastic standard coupler with metal knuckle, and #634 standard centering spring and comes complete with insulated draft gearbox and lid. The#26 Magne-Matic® Metal Coupler may be mounted with the included #213 or #232 Gearbox or with most other manufacturers cast-on coupler pockets. It is not recommended to use a metal coupler directly on a metal surface or in a metal draft gearbox to avoid possible electrical crossover and shorting that may cause damage. HO-Scale Package Includes: (2) Pair #26 Plastic Shank Couplers - Long Centerset Shank (2) Pair #634 Centering Spring NO.5® Style (2) Pair 055" ID & .100" ID Bushing/Sleeves (2) Pair #212 Talgo Truck Adaptors (2) Pair #213 Gearboxes (2) Pair #232 Gearboxes (2) #622 Knuckle Springs #26 Plastic Coupler Features: Material  -   Metal Knuckle, Plastic Coupler Shank Shank Length  -   Long (25/64") (center hole to back of coupler head) Coupler Offset  -   Centerset Knuckle Spring  -   #622 Centering System  -   Standard Shank Centering Spring  -   #634 Centering Spring NO.5® Style Head  -   Standard Head Works In Place of  -  #146, long centerset "clone" couplers Works With  -   #213, #232, #234, #242, most manufacturer cast-on draft gearboxes #212 Talgo Truck Adaptors: Material  -   Insulated Plastic Works With  -   NO.5®, #58, 20-Series and all Whisker® Couplers #213 Plastic Draft Gearboxes: Material  -   Insulated Plastic Dimensions  -   25/64"L x 5/16"W x 3/32"H Works With  -   NO.5®, #58, 20-Series and all Whisker® Couplers #232 Plastic Draft Gearboxes & Lids Features: Material  -   Insulated Plastic Dimensions  -   29/64"L x 19/64"W x 7/64"H Works With  -   NO.5®, #58, 20-Series and all Whisker® Couplers #26 with a #212 Talgo Truck Adaptor. Mounting Specifications: Centerline  -   25/64" Trip Pin Height  -   1/32" #26 in a #213 monted on bottom. Mounting Specifications: Mounting Height  -   29/64" Centerline  -   25/64" Trip Pin Height  -   1/32" Center Hole  -   2-56 Insulated Screws are the most commonly used. (Screw length will vary) #26 in a #213 monted on top. Mounting Specifications: Mounting Height  -   23/64" Centerline  -   25/64" Trip Pin Height  -   1/32" Center Hole  -   2-56 Insulated Screws are the most commonly used. (Screw length will vary) #26 in a #232 Mounting Specifications: Mounting Height  -   29/64" Centerline  -   25/64" Trip Pin Height  -   1/32" Center Hole  -   2-56 Insulated Screws are the most commonly used. (Screw length will vary) Side Holes  -   0-48 Self-Tapping or 0-80 Machine Screws. (Screw length will vary) Recommended Tools: #206 Insulated Muti-Purpose Coupler Height Gauge #230 Talgo Adaptor Insertion Pic #231 Greas-em Dry Graphite Lubricant #237 Coupler Trip Pin Pliers #240 Double Headed Pin Vise #241 Dual Tool Manual Uncoupling Tool and Spring Pick #246 Tap (2-56) and Drills (#50 and #43) #780 Tap (0-80) and Drills (#55 and #52)

Read more less

This industry leading coupler features plastic standard coupler with metal knuckle, and #634 standard centering spring and comes complete with insulated draft gearbox and lid. The#24 Magne-Matic® Metal Coupler may be mounted with the included #213 or #232 Gearbox or with most other manufacturers cast-on coupler pockets. It is not recommended to use a metal coupler directly on a metal surface or in a metal draft gearbox to avoid possible electrical crossover and shorting that may cause damage. HO-Scale Package Includes: (2) Pair #24 Plastic Shank Couplers - Short Underset Shank (2) Pair #634 Centering Spring NO.5® Style (2) Pair 055" ID & .100" ID Bushing/Sleeves (2) Pair #212 Talgo Truck Adaptors (2) Pair #213 Gearboxes (2) Pair #232 Gearboxes (2) #622 Knuckle Springs #24 Plastic Coupler Features: Material  -   Metal Knuckle, Plastic Coupler Shank Shank Length  -   Short (1/4") (center hole to back of coupler head) Coupler Offset  -  Underset Knuckle Spring  -   #622 Centering System  -   Standard Shank Centering Spring  -   #634 Centering Spring NO.5® Style Head  -   Standard Head Works In Place of  -  #144, short underset "clone" couplers Works With  -   #213, #232, #234, #242, most manufacturer cast-on draft gearboxes #212 Talgo Truck Adaptors: Material  -   Insulated Plastic Works With  -   NO.5®, #58, 20-Series and all Whisker® Couplers #213 Plastic Draft Gearboxes: Material  -   Insulated Plastic Dimensions  -   25/64"L x 5/16"W x 3/32"H Works With  -   NO.5®, #58, 20-Series and all Whisker® Couplers #232 Plastic Draft Gearboxes & Lids Features: Material  -   Insulated Plastic Dimensions  -   29/64"L x 19/64"W x 7/64"H Works With  -   NO.5®, #58, 20-Series and all Whisker® Couplers #24 with a #212 Talgo Truck Adaptor. Mounting Specifications: Centerline  -   25/64" Trip Pin Height  -   1/32" #24 in a #213 monted on bottom. Mounting Specifications: Mounting Height  -  25/64" Centerline  -   25/64" Trip Pin Height  -   1/32" Center Hole  -   2-56 Insulated Screws are the most commonly used. (Screw length will vary) #24 in a #213 monted on top. Mounting Specifications: Mounting Height  -   19/64" Centerline  -   25/64" Trip Pin Height  -   1/32" Center Hole  -   2-56 Insulated Screws are the most commonly used. (Screw length will vary) #24 in a #232 Mounting Specifications: Mounting Height  -   25/64" Centerline  -   25/64" Trip Pin Height  -   1/32" Center Hole  -   2-56 Insulated Screws are the most commonly used. (Screw length will vary) Side Holes  -   0-48 Self-Tapping or 0-80 Machine Screws. (Screw length will vary) Recommended Tools: #206 Insulated Muti-Purpose Coupler Height Gauge #230 Talgo Adaptor Insertion Pic #231 Greas-em Dry Graphite Lubricant #237 Coupler Trip Pin Pliers #240 Double Headed Pin Vise #241 Dual Tool Manual Uncoupling Tool and Spring Pick #246 Tap (2-56) and Drills (#50 and #43) #780 Tap (0-80) and Drills (#55 and #52)

Read more less

The CB-1 is used to divide the output of a power supply to isolate small sections of track, limiting the impact of short circuits if derailments occur to just one area of your layout. Add multiple CB-1 to isolate several sections of track. Features: All Solid State Design Simple Connection with Only 4 Wires No Adjustments Necessary Provides Short Circuit Isolation for a Section of Track Status Indicator Light Fast and Secure Spring Clamp Connecters Fully Enclosed Circuit Board Electronics Size: 4.60 x 3.00 x 1.18 inches    

Read more less

The AM-1S is a module that you can install on your model train layout to control Accessory Projects. You can control a turntable, swing bridge, oil pumps, lights in buildings, and much more!!! You can use our RailPro Assistant Software to design custom screens for your HC-2 to control your accessories!!! The AM-1S can be controlled and setup by a Ring Engineering RailPro Controller, such as the HC-2 Handheld Controller. The AM-1S is not for use with turnouts. Please use AM-1 for turnout control. Control motors, lights, operate lights with light effects and play custom loaded sounds! Features: Size: 4.60 x 3.00 x 1.18 inches   Important Note: Important Note: The AM-1S hardware has 8 outputs that can be software controlled for 4 motor outputs or 8 sourcing outputs. It also has another 8 I/O that can be configured for 8 inputs or 8 sinking outputs. Currently there is only one software configuration available for the module (2 motor outputs, 4 sinking outputs, and 8 inputs). We expect to offer more software configurations in the future.    

Read more less

The A6X is six function HO-scale "drop-in" style mobile decoder with integrated 1.5V power supply for Atlas, Athearn, Kato, etc. locomotives. Examples include the following:Athearn: F59PHI F3 Atlas: RS-1/RS-3/RS-11 C424 GP7 Kato: GP35 Back EMF Load Compensation:Provides superior slow speed control and high performance under load. Quiet Drive:Super-quiet motor control for "buzz" free motor performance. DC Mode:Decoder will automatically detect DC power. You can also configure how your lighting effects function on DC. RailCom®:This feature allows the decoder to talk to the command station. RailCom supports expansion for new features. Variable Momentum:Allows you to make custom acceleration and deceleration curves. 1.5 Volt Power Supply:This product has an on-board 1.5 Volt power supply for use with 1.5 Volt bulbs without resistors. LED Support:This product does not require external resistors when connecting LED's. Incandescent Bulb Support:This decoder can be used with 12 Volt bulbs. Function Remapping:Buttons 0 through 12 may be used to control the lighting functions of this decoder. Programmable Lighting Effects:Choose from 20 separate user-programmable lighting effects! Dimmable Brightness:Configure multiple different brightness levels for your LED's or incandescent bulbs. Decoder Lock:Feature which prevents accidental/unwanted programming while activated. Airwire™ Compatible:Fully compatible with Airwire™ operation. User-Loadable Speed Tables:Configure custom speed curves and set speed limits. Specs Interface Type: Drop-In Dimensions (L x W x H): 2.85" x 0.682" x 0.155" or 72.39mm x 17.32mm x 3.94mm Scale: HO Scale Continuous/Peak: 1.0/2.0 Amp Total Functions: 6 Function Rating: 100 mA 12V Outputs: 6 LED Outputs: 6 1.5V Bulb Outputs: 6

Read more less

WOWKits provide everything needed for a complete sound installation. This WOWKit includes: A WOWSound decoder TCS motherboard with on-board Keep Alive® Speaker with speaker wire Motor mounting clip Each WOWKit has been engineered for a perfect fit in your locomotive. Even if you are new to DCC or DCC installations, you can achieve Easy, Clean, Professional results using WOWKits. WOWKits make sound installation as simple and all-inclusive as possible.  The TCS website features step-by-step installation pictures and instructions for each WOWKit.  Includes AK-MB1 Motherboard WOW121-Diesel Decoder 32mm Round Speaker Kit Motherboard Motor Mount Accessories Locomotive Compatibility Walthers EMD E8A Walthers Life Like Proto 2000 E7A Walthers Life Like EMD E8A Low Frame Walthers Life Like EMD E8A High Frame

Read more less

Hand Crafted Telephone Poles uniquely created by Squeaky’s Trains & Things. 5 Pack. 3D printed with high quality materials. HO Scale Size: 3.30″ / 84mm (1:87) Hand painted, each pole is unique. Notes: Unpainted or un-finished 3D printed models may come in any base color that was available for use at the time of printing. Base color requests are accepted but not always possible to fulfill. Please, no returns or refunds for base color reasons.

Read more less

36″ Code 83 Super-Flex Track with brown ties, nickel silver rail. Pack Size: 5 Length: 36″ Color: Brown, Wood Ties.

Read more less

Code 83 HO Scale Nickel Silver Rail 22″ Radius Left Manual Snap-Switch

Read more less

This 16mm x 9mm speaker could be classified as a “sugar cube” speaker. This style of speaker is often feature in cell phones and tablets and performs slightly differently from standard speakers. This style of speaker REQUIRES mounting with a baffle to produce much sound at all, but once they are mounted they produce significantly more sound than you might expect. Try them out in your space restricted installations. Dimensions: 0.63″ x 0.35″ x 0.12″ or 16mm x 9mm x 3.1mm Sound Pressure Level: 97 dB Effective Frequency Band: 300 Hz. to 20,000 Hz. Power Rating: 0.7W (Typical) 1W (Peak) DC Impedance: 8 Ω ± 15 % at 1.0V 1,000 Hz.

Read more less