Best Sellers

The WOW121 is a universal sound decoder for locomotives with DCC-ready 21-pin MTC connectors, and can also be used with any of TCS’ motherboards. The WOW121 requires a motherboard to interface with the locomotive. The motherboard will determine the support for the number of lighting functions as well as the type supported (LED or 12V/1.5V bulbs). A WOW121 decoder will support up to 8 lighting functions. Note: Function 5 and 6 are not programmable, and will only output constant bright lights. Take this into account when wiring multiple lighting functions. CD-Quality Sound: TCS’ world-renowned CD-quality sound. 16 Bits of resolution at 44.1kHz sample rate. Back EMF Load Compensation: Provides superior slow speed control and high performance under load. Quiet Drive: Super-quiet motor control for “buzz” free motor performance. DC Mode: Decoder will automatically detect DC power. You can also configure how your lighting effects function on DC. Variable Momentum: Allows you to make custom acceleration and deceleration curves. Function Remapping: Buttons 0 through 12 may be used to control the lighting functions of this decoder. Programmable Lighting Effects: Choose from 20 separate user-programmable lighting effects! Dimmable Brightness: Configure multiple different brightness levels for your LED’s or incandescent bulbs. Decoder Lock: Feature which prevents accidental/unwanted programming while activated. Airwire™ Compatible: Fully compatible with Airwire™ operation. CAM: Use a positive voltage trigger to synchronize your chuff rate to your drivers’ rotation. Audio Assist®: TCS exclusive auditory feedback programming system. Program your decoder without the need to memorize CV’s! User-Loadable Speed Tables: Configure custom speed curves and set speed limits. Throttle Modes: Choose from multiple throttle modes to meet your operating needs. True Scale Sound: A unique WOWSound feature which uses TCS’ exclusive auto-adjusting BEMF technology to automatically change the intensity of the chuff. Prototype Mode also offers dynamic sound volumes which accurately model the real-life equivalent. Also includes pre-programmed acceleration and deceleration values. Specs Interface Type: Direct-Plug (21-Pin MTC) Dimensions (L x W x H): 1.28” x .69” x .22” or 32.5mm x 17.5mm x 5.6mm Scale: HO Scale Continuous/Peak: 1.3/2.0 Amp Total Functions: 8 Function Rating: 100 mA 12V Outputs: 8 Speaker Selection This decoder is optimized for 8 Ω speakers (not included). This decoder uses and audio amplifier capable of supplying up to 2 Watts of power. A 1 Watt minimum power rating is recommended for use with this decoder. If you are using a speaker with less than 1 Watt power rating, you must reduce your volume to prevent speaker failure or amplifier stress. Speaker enclosures greatly increase speaker performance in most cases.

Read more less

Code 83 HO Scale Nickel Silver Rail 22″ Radius Left Manual Snap-Switch

Read more less

Producing sounds with the clarity and volume of a much larger speaker these 32mm (1.26″) speakers are perfect for tight installations that still require BIG sound. Dimensions: 1.26″ diameter x 0.2″ or 32mm diameter x 5.1mm Sound Pressure Level: 94 dB ± 3.0 dB at 0.8 , 1.0 , 1.2 , 1.5 KHz. Effective Frequency Band: 280 Hz. to 20,000 Hz. Power Rating: 0.5W (Typical) 0.8W (Peak) DC Impedance: 8 Ω ± 15 % at 1.0V 1,000 Hz.

Read more less

The TSU-1100 is one of SoundTraxx’s smallest sound decoders, yet is packed with a plethora of high-performance features! You will feel like you are in the cab with the amazing new features that Tsunami2 has to offer including: Reactive Dynamic Digital Exhaust, Functioning locomotive and train brakes, injectors, power reverse, and firebox flicker. SoundTraxx also offer a large selection of selectable sound effects including: exhaust chuffs(10), prime movers (up to 12), bells (12), Whistles (90), airhorns (40+), couplers, dynamos and more! This micro 1-amp, universal-style format is ideal for small models with minimal space. It includes an optional capacitor or can be wired to a CurrentKeeper (P.N. 810140) to maintain performance over dirty track and switches. Product Specifications: Sound Profile: EMD Diesel Dimensions: 27 x 10.5 x 5mm Max. Motor Stall Current: 1A Max. Function Current: 100mA (each output) Function Outputs: 4 Audio Amplifier: 1 Watt, 8-Ohm Load DCC Track Voltage: 7.5V – 22V Sound Channels: 16

Read more less

SoundTraxx Blunami decoders will change the way you enjoy the model railroading hobby. They operate in DC, DCC, or wireless mode with the free Blunami App. The Blunami BLU-21PNEM8The BLU-21PNEM8 is a 1-amp Digital Sound Decoder with 8 function outputs. It is designed for easy plug-in operation when mated to a 21-pin NEM connector. You will feel like you are in the cab with the amazing new features that Blunami has to offer including: Reactive Dynamic Digital Exhaust, Functioning locomotive and train brakes, injectors, power reverse, and firebox flicker. We also offer a large selection of selectable sound effects including: exhaust chuffs (10), prime movers (up to 12), bells (12), Whistles (90), airhorns (40+), couplers, dynamos, and more! Need Help Choosing a Sound Profile?We have tons of sounds to match a wide range of locomotives. So many, in fact, we cannot fit them all on one decoder. Therefore, they are broken up into sound profiles of like sounds (Steam, EMD, GE, Electric, etc.). If you don't know which sound profile you need, the best place to start is the Sound Selection References. These will list all the prime movers or exhaust chuffs available on each sound profile. If you need further assistance explore these links:  Decoder Selector: Tells you which board format and part number you need for specific models. Sound Samples: Hear SoundTraxx sounds in action!

Read more less

By default, this decoder does not come with a pre-programmed Sound Profile. Nevertheless, we provide complimentary Sound File programming for all ESU decoders. Please be aware that opting for Sound File Programming in your order might result in a shipment delay of 1 to 2 business days. Visit this link to preview ESU Sounds 8-Pin NEM652 Harness Plug, 30 x 15.5mm Version The LokSound 5 is the most important member of the LokSound family. Due to the combination of the digital decoder and the sound module on one circuit board we achieve the smallest possible dimensions of 30 mm x 15.5 mm. Therefore it fits into almost any H0 or 0 gauge locomotive. LokSound 5 decoders are available with all popular interface types and are supplied with a sugar cube speaker (11 mm x 15 mm) and a sound enclosure. The LokSound 5 DCC is made for the North American and Australian markets. It is a pure DCC Decoder, which supports RailComPlus and can also be used on DC layouts. Please note the LokSound 5 DCC decoder does not come with a speaker. Operating modes Like all products of the LokSound family the LokSound 5 is a true multi protocol decoder. It supports DCC as well as Motorola®, Selectrix® and M4. Of course it supports 14 through to 128 speed steps as well as 2 and 4 digit addresses in DCC format and up to 32 functions. Thanks to RailComPlus® the decoders register themselves fully automatically on suitable command stations. This decoder supports all DCC programming modes and thanks to RailCom® you may read out the CV values on the main, provided you have a command station supporting RailCom®. There are utility registers for command stations that only facilitate programming of CVs ranging from 1 to 255. Motorola® users benefit from up to 28 speed steps for 255 addresses. Three additional Motorola® addresses facilitate triggering of 16 functions. An integral programming mode even allows programming with the good old Central Unit 6021. The M4 protocol supports the automatic registration on mfx® compatible central units. The LokSound 5 decoder supports the Märklin® braking sections just as well as the ZIMO® HLU braking commands or the Lenz® ABC system. Braking with DCC brake generators or with DC is also possible. Furthermore the locomotive with a LokSound will come to a halt when a Selectrix® braking diode is switched into the circuit. The ABC push-pull feature enables the automatic commuting between two stations. The LokSound 5 decoder is also suitable for analogue DC and AC (!) layouts. Sound The LokSound 5 decoder can reproduce up to 10 channels simultaneously. Each channel offers up to 16 Bit / 31250 kHz and thus we have finally achieved hi-fi sound quality on your layout. For all practical purposes one cannot detect any difference to the original. A class D audio power amplifier with up to 3W output power feeds the speakers with a permitted impedance of 4 – 32 Ohms. The huge 128 MBit sound memory assures sufficient storage capacity. The volume of all individual sound fragments may be adjusted separately. The outstandingly flexible sound engine without a rigid flow chart facilitates a prototypical simulation of all conceivable rail vehicles. Three separately adjustable braking functions and two alternative load scenarios provide you with maximum control of your vehicles. Functions We are quite aware that you want your locomotives to be as realistic as possible. Therefore we have packed many function outputs into it.  Subject to the type of interface every LokSound 5 has at least 10 amplified outputs. The decoders with PluX22 or 21MTC interface have an additional 4 outputs for controlling servos or as logic outputs. Of course, all important lighting functions are supported. The brightness of each output may be adjusted separately. The decoder supports the automatic push and pull movements – known as the coupler waltz - required for reliable operation of digital couplers such as the ones by ROCO® and Krois® as well as Telex® couplers. Motor control Motor control of the LokSound 5 has been further improved. A variable PWM pulse frequency ranging from 10 kHz to 50 kHz assures perfect silent operation, particularly for coreless motors. Thus the typical hum is a thing of the past. Load control can now be adjusted with up to 10 separate CVs and thus will manage even the most difficult cases. The unique “Auto Tune” function facilitates the automatic calibration of the decoder to perfectly match the motor. The LokSound 5 decoder supplies up to 1.5A motor current, which is quite sufficient even for older motor types. LokSound 5 DCC The LokSound 5 DCC is made for the North American and Australian markets. It is a pure DCC Decoder, which supports RailComPlus and can also be used on DC layouts. More Information Item # 58420 Brand ESU Scale HO & O WARNING: This product can expose you to a chemical, which is known to the State of California to cause Cancer and Reproductive Harm - For more information go to www.P65Warnings.ca.gov

Read more less

Since smart phones with touch screens have almost completely replaced the conventional mobile phone, model train enthusiasts and manufacturers face the question how to employ more powerful devices for controlling model trains. As a result of this, many apps have been developed lately, which can be uploaded onto your mobile phone and used for running your trains. This concept, however, has one disadvantage, namely that smart phones have not been primarily designed for running model trains. Due to the lack of suitable input elements the operator is forced to spend most of the time looking at the display. The limits become quickly obvious so we at ESU had a look at the question on how to utilize the advantages of the smart phone technology and combine it with the needs of model train enthusiasts. It is with great joy that we now present the results of our considerations. With the new ESU CabControl DCC system you have wireless control of your locomotives, accessories and routes simply by Wi-Fi! With the 50310 CabControl Integrated Control Unit, advanced model railroading is as simple as ever. With our new system, you have full control over your locomotives, switches and signals just at the tap of a finger. The unit communicates with our Mobile Control II Wireless Controller via wireless LAN. The CabControl’s integrated 7 Amp booster also allows it to power even larger layouts with ease. LokSound decoders equipped with RailComPlus® even register automatically with the system! Running trains has finally caught up with the technology of today! CabControl - Integrated Control Unit ESU’s “North American” System This system was specially developed for use in North America and Australia. American and Australian locomotive icons (along with European Icons) Easy Consisting for multiple unit lash-ups using drop down menus Wireless walk around system making it easy to follow your train on a large layout. Technical Specification CabControl Features All DCC modes (14, 28, 128 speed steps) Long and short addresses Over 16,000 locomotives can be arranged and controlled Up to 28 functions per locomotive All Scales can be used with the CabControl system with the variable voltage 7Amp Power Supply Built-in WLAN Access Point Creates a unique Wifi-Network for your Mobile Control II Wireless throttles Supports at least 32 Mobile Control II Wireless ControllersCompliant with all relevant IEEE WLAN standards. Suitable for use in America and Europe The CabControl features a LAN port to connect the box to your home network. Via the home network, the CabControl can be connected to Model RailRoad Control Software. “ECoSlink” port For easy connection with our ESU boosters, CabControl supports ECoSlink, a high speed, CAN based bus system. The CabControl built-in booster has so much power that, in most cases, you don‘t need additional ones. Hook Up Hook up is simple with the CabControl system. All you have to do is plug the 7 Amp power supply into the CabControl box and then hook up your CabControl box to your track for track power and its ready to go!  The wireless controllers automatically connect to the system via WLAN.  Upgradable On occasion new features will be added to the CabControl system. Gone are the days of having to send your DCC command station back to the manufacturer for updates! When a new update becomes available it is as simple as loading this to a USB Data stick and plugging it in to the back of the system. Easy! Protection Each CabControl system meets the relevant requirements regarding safety and operation on a layout: The track outlet is protected against overload as well as short circuits. Each CabControl system can differentiate between a “genuine” short, and a momentary current drain when passing over switches or gaps. We place value on the indestructibility of the device, just like we do with our mobile decoders. Expansion As the CabControl System uses the ESU Mobile Control II Wireless Throttles, expansion is easy as these throttles are already available and will connect automatically to the Integrated Control Unit. The system can also be used with the ECoSBoost Boosters using the ECoSlink Terminals when more power is needed for large layouts. CabControl - Handheld Wireless Throttle Ergonomics & Functionality Combined When you hold your CabControl Throttle in your hands for the first time you will immediately notice its excellent ergonomics. All Parts of the screen can easily be reached with one hand, and unlike a cell phone throttle, the most important functions can even be reached “without looking” giving you the ability to watch your trains and not needing to watch your throttle. This is due to the central, motorized throttle knob with end stop. With this knob you can delicately control the speed of your trains and change direction. For activating functions simply touch the icons on the display. The display also serves for changing functions – exactly the same way as you know it from your mobile phone.  Finally, two buttons each on either side serve for changing direction or triggering the most important functions. These side buttons are user editable giving you the choice of what you want to control with them. Colorized Function Icons are displayed showing what function does what. Gone are the days of having to memorize what function button control what decoder feature. Running Locomotives The CabControl Throttles can control all locomotives registered in the system and supports 14, 28 or 128 speed steps. All of the important locomotive properties such as name, a picture, function mapping as well as easily identifiable icons for function buttons will be taken from the Integrated Control Unit and will be displayed correctly. You may switch up to 28 functions for each locomotive, which, of course, can either be momentary or continuous functions. You read that correctly! EVERY Function Button can be momentary or latching depending on your use! No more limitations on how you function map your decoders. As standards are constantly changing and the number of DCC function buttons is increased a simple update will allow for even more! Controlling Accessories The CabControl System has the ability to run over 1000 magnetic accessories. More Fun in Operations The high resolution (480 x 800 pixels, 280 dpi), backlit TFT display of the CabControl Throttle always keeps you up to date on the most important operating parameters. Furthermore, you can see if another operator controls a certain locomotive or if an emergency stop has been triggered. The permanently installed, powerful Lithium polymer rechargeable battery will serve you right through the most extensive operating sessions giving 5-8 hours of operation based on how you are using your throttles. Recharge the batteries of your CabControl simply by using the USB port on the Integrated Control Unit and the supplied Micro USB Cable or the battery charger of your mobile phone or any other USB port. Open Platform The CabControl Throttles are based on the Android operating system. We have created a powerful basis for this open, globally used operating system:  The ARM® Cortex® A8 microprocessor clocked with 1.3 GHz and controls a high resolution 3.2 inch TFT color display. A capacitive touch screen assures touch-free data entry. For communicating with the “outside world” there is an USB port and a WLAN interface. Thanks to the standardized radio control interface, trouble free operation of your layout can be assured at any time. The range can be extended with WLAN repeaters, if necessary. Due to the open platform design you may add further apps for the Google Play Store at any time.   *The CabControl DCC System was specifically created for the North American and Australian Market and as such can only be purchased though ESU LLC in the USA. More Information Item # 50310 Brand ESU Scale Multi

Read more less

This iMax B6AC is a rapid charger with a high-performance microprocessor. Features: Microprocessor controlled Delta-peak sensitivity. Individual cell balancing Li-ion, LiPo and LiFe capable Ni-Cd and NiMH capable Large range of charge currents Store function, allows safe storage current Time limit function Input voltage monitoring. (Protects car batteries at the field) Data storage (Store up to 5 packs in memory) Battery break in and cycling. Support new generation 123 system (LiFe) battery   Specifications: Operating voltage range: DC11.0-18.0 Volt / AC to DC adaptor(DC11.0-18.0V/5A) Circuit power:  Max.charge power 80W    /     Max.discharge power 5W Charge Current Range: .1~5.0A Discharge current range: 0.1-1.0A Current drain for balancing Li-po: 300mAH/cell LiIon/LiPo/LiFe cells : 1-6 NiCd/NiMH cells : 1-15 Pb battery voltage: 2~20v Unit Package Gross Weight: 580g Dimensions: 133x87x33mm Compare to iMAX B5: Can charge 6 cells LiPo battery (B5 can charge maximum 5 cells) With Discharge Function 123 Life Charging Package: 1 x IMAX B6 AC 80W 1 x Power adapter (US plug) 1 x Charging Cable  

Read more less

Expand your HO trainset fun in minutes with the WalthersTrainline EMD GP15-1 diesel! Fully assembled and ready for service, features include: Directional headlights All-wheel drive and electrical pick-up Powerful can motor with flywheel Heavy die-cast metal frame for added pulling power Colorful paint and lettering schemes Body-mounted magnetic knuckle couplers RP-25 metal wheels

Read more less

All aboard for hours of HO model railroading fun with the WalthersTrainline Flyer Express starter set. With everything you need to get going, each is complete with: Hobby-quality all-in-one sets built for years of fun Power-Loc(TM) Track with: - Nickel silver rail, brown ties and gray roadbed for more realism - Simple, sturdy construction, snaps-together without tools or rail joiners! - Includes 14 track sections to build a 38 x 45" (0.96 x 1.1m) oval Expand any time with matching track and accessories available separately Powered GP15-1 diesel with working headlight 3 assembled cars with metal wheels and Proto MAX(TM) metal knuckle couplers: - Matching wide vision caboose - 53' Norfolk Southern smooth side gondola - 50' Conrail insulated boxcar Power pack and speed/direction controller Full-color "Walthers Getting Started Guide" for new modelers Complete set-up and operating instructions

Read more less

The railway world has always aroused the curiosity of scale modelers for obvious reasons including the high level of detail, the perfection of their machinery, and the great care with which the layouts are faithfully recreated making railway modelling an icon in our hobby. AMMO continues with our philosophy of offering quick and effective solutions that provide durable and authentic finishes for all modelers of any subject. After years of research and collaboration from the experts of the world, we present the range of authentic colours for railway modeling, introducing: Rail Center. Type: Rail Center Acrylic Thinner Size: 15 ML What are Rail Center acrylic paints? The Rail Center colour range of acrylic paints is designed specifically for railway modelling enthusiasts. These colours can be applied easily by both brush and airbrush, providing outstanding covering power and a uniform finish.  The authentic Rail Center line includes the colours to paint your locomotives and rolling stock in service of the worlds most beloved railway companies worldwide. Ranging from Diesels and Steam Locomotives to the many different types of passenger, freight cars, tankers, and all rail side accessories, the Rail Center line provides the most authentic colours available. The ease of application by both brush and airbrush combined with high durability make the Rail Center range the best possible choice for all model railroaders.  What are they made of?For the manufacture of the acrylic paints within the Rail Center range, ultra-fine pigments of the highest quality and acrylic resins have been specially formulated to achieve the perfect balance for their use with both brush and airbrush. These components, together with the high-performance acrylic solvent, make these paints highly durable and easy to apply. The acrylic formulation of Rail Center paints has no smell, so they can be used at home without issues. When applied through the airbrush, always work in a well ventilated room. Why do you need RailCenter Acrylic Paints?The Rail Center range includes all of the colours needed to finish and weather the world’s best-known railway company colours, saving you time and money by allowing you to accurately paint without having to make complicated mixes. The Rail Center range includes accurate colours selected after meticulous historical research by some of the best modellers and historians in the world. In addition, this line provides the perfect balance between a uniform and durable finish, fast convenient drying times, and products that are always easy to apply for all modelers, both beginners and experienced alike. Once dry, you can apply every type of enamel or acrylic weathering products as well as masking tapes and decals without risk of damaging the finish. The Rail Center colours can be applied over any type of paint including acrylic, enamel or lacquer.

Read more less

At the curb or on the job, add color and variety to your HO vehicle fleet with SceneMaster Service and Delivery Vans! Based on contemporary designs used by all kinds of businesses big and small, you'll also find them in the ranks of the fire and rescue service. Factory painted and printed in full color, the finished models look great on layouts and in collections. Each also includes modeler-applied side mirrors for more realism.

Read more less