Black Friday - 15% Off

The Bachmann HO Scale Santa Fe Flyer Train Set is an excellent entry into the hobby of model railroading. Decorated for the famous Santa Fe Railway, the EMD FT-A diesel locomotive with operating headlight, diecast chassis and eight-wheel drive hauls its freight with ease. Following just behind is an open quad hopper with coal load, a gondola and a cupola caboose. The train rides on a 36" circle of E-Z Track, including 11 pieces of curved track and a curved plug-in terminal rerailer. Cars feature E-Z Mate(R) couplers. Also includes a UL-listed power pack and an illustrated instruction manual. 

Read more less

Dual Stationary Decoder for Bi-polar, Snap Switches or Slow Motion Machines DS52 Features: Simple hook up and set up. Control 2 individual turnout machines.2 Slow motion turnout machines, such as Tortoise™ by Circuitron or Switchmaster™.OR2 Solenoid type turnout machines such as three wire Peco or Atlas Snap Switches or two wire bi-polar type turnout machines such as Kato Unitrack, AristoCraft, or LGB turnouts with powerful capacitive discharge capability. Turnout addresses can be set individually or in groups of 2. Screw terminals make installation easy! DCC compatible. Screw terminals make installation and set up easy. Control 2 solenoid type turnout machines: 2 wire bi-polar (Kato Unitrack Switches, etc.) and/or 3 wire (Peco, Atlas Snap Switches, etc.) Addresses can be independent or sequential All Scales up to 22V track power. More Information Item # DS52 Brand Digitrax Scale Multi Scale MSRP $28.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Specification Sheet / Instruction Sheet

Read more less

The Digitrax SE74 Signal Decoder is a must-have for any model train enthusiast. With its multi-scale compatibility and precise control, you can easily customize and automate your train signals. Benefit from the professional and objective tone of this product, which relies on domain expertise and scientific language to deliver top-notch performance. Fully connectorized installation. Optional support for DCC 9-Aspect control mode, including Lunars. Easy setup with Option Switches and LocoNet programming. Configurable for four solenoid or four slow-motion turnout control. 8 Input lines for local control and sensors. 8 System routes with 8 entries each. Advanced LocoNet configuration capability with Series7 style installation support using a DT602. More Information Item # SE74 Brand Digitrax MSRP $119.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet

Read more less

Includes 3 Signal Masts that can be used as Signal Mast Bases in any scale or can be painted and detailed and used as N-scale signal masts. More Information Item # SMBK Brand Digitrax MSRP $17.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet / Specification Sheet

Read more less

N scale Mainline Signaling Kit including: 2 Single Head A Signals, 2 Single Head B Signals, 4 SMP1s, 8 spacers, 8 screws. Makes all of your signals plug ‘n play with small 10 pin connectors. Can be used as a basic N scale signal. Mounting board and hardware included. Current setting resistors are built in to the board. Easy mainline setup with A and B mast configurations. Pads are provided to make it easy to attach any signal to the mast base. This product is intended for use with the SE8C. The Digitrax Plug ‘N Play Signal Mast consists of a signal mast with one or two signal heads depending on mast configuration. Included with the kit are mounting boards and hardware that makes it easy to mount and connect the signal mast to the SE8C signal driver cable. This product is intended for use with the SE8C and other Digitrax signaling decoders. More Information Item # SN2AB Brand Digitrax MSRP $27.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet

Read more less

N scale Turnout Signaling Kit including:  1 Dual Head A Signal, 1 Single Head B Signal, 1 Single Head C Signal, 3 SMP1s, 6 spacers, 6 screws. Makes all of your signals plug ‘n play with small 10 pin connectors. Can be used as a basic N scale signal. Mounting board and hardware included. Current setting resistors are built in to the board. Easy plant setup with A, B, and C mast configurations. Pads are provided to make it easy to attach any signal to the mast base. This product is intended for use with the SE8C. The Digitrax Plug ‘N Play Signal Mast consists of a signal mast with one or two signal heads depending on mast configuration. Included with the kit are mounting boards and hardware that makes it easy to mount and connect the signal mast to the SE8C signal driver cable. This product is intended for use with the SE8C and other Digitrax signaling decoders. More Information Item # SNABC Brand Digitrax MSRP $27.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet  

Read more less

HO scale Mainline Signaling Kit including: 2 Single Head A Signals, 2 Single Head B Signals, 4 SMP1s, 8 spacers, 8 screws. Makes all of your signals plug ‘n play with small 10 pin connectors. Can be used as a basic HO scale signal. Mounting board and hardware included. Current setting resistors are built in to the board. Easy mainline setup with A and B mast configurations. Pads are provided to make it easy to attach any signal to the mast base. This product is intended for use with the SE8C. The Digitrax Plug ‘N Play Signal Mast consists of a signal mast with one or two signal heads depending on mast configuration. Included with the kit are mounting boards and hardware that makes it easy to mount and connect the signal mast to the SE8C signal driver cable. This product is intended for use with the SE8C and other Digitrax signaling decoders. More Information Item # SH2AB Brand Digitrax MSRP $27.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet

Read more less

HO scale Turnout Signaling Kit including:  1 Dual Head A Signal, 1 Single Head B Signal, 1 Single Head C Signal, 3 SMP1s, 6 spacers, 6 screws. Makes all of your signals plug ‘n play with small 10 pin connectors. Can be used as a basic HO scale signal. Mounting board and hardware included. Current setting resistors are built in to the board. Easy plant setup with A, B, and C mast configurations. Pads are provided to make it easy to attach any signal to the mast base. This product is intended for use with the SE8C. The Digitrax Plug ‘N Play Signal Mast consists of a signal mast with one or two signal heads depending on mast configuration. Included with the kit are mounting boards and hardware that makes it easy to mount and connect the signal mast to the SE8C signal driver cable. This product is intended for use with the SE8C and other Digitrax signaling decoders. More Information Item # SHABC Brand Digitrax MSRP $27.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet  

Read more less

Includes 2 terminal strip boards with resistors for easy installation. Each terminal strip board can handle from 1 to 4 signal heads. Use this interface instead of Signal Mast Bases when you already have signals installed on your layout. Simply run the wires from your existing signals to the terminals on the TSMK and plug your Signal Driver Cable in on the plug provided. More Information Item # TSMK Brand Digitrax Warranty No Worries Warranty (read more) MSRP $17.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet / Specification Sheet

Read more less

Under layout mounting hardware for Signal Driver Cables and their sockets. 6 metal signal straps and 6 signal spacers. These handy bits of hardware hold your signal plugs at just the right distance from the layout to make it easy to plug in your signals. More Information Item # PM74 Brand Digitrax Warranty No Worries Warranty (read more) MSRP $12.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet / Specification Sheet

Read more less