Coupons

MTO TRAIN-32 LI-ION 11.1V / .75Ah Great for "dead rail" model railroad installations in locomotive (G-scale or LGB) or trailing power cars.   Approximate Dimensions: 4.00" x 1.125 x .75" Weight: .30lb Connector: 22AWG RED JST SYP Max Continuous Discharge: 1.5A Overdischarge protection: Yes Overcharge protection: Yes Recommended Charge Current: .50A Short Circuit Protection: Yes Please fully charge battery prior to storage. Batteries should be charged every 3 months during periods of storage.

Read more less

Model Features: Directional headlights and tail lights on both the front and rear of the locomotive, allowing it to operate as both a standard pulling locomotive with double heading capability or a push-pull engine, whether oriented facing forward or back. Illuminated pre-printed numberboards Capable of navigating minimum 370mm (14 3/5″) radius curves (R1 radius in Europe), allowing the P42 to go where previous Kato locomotives have never been able to go before – dining room tables, coffee tables, spaces previously reserved exclusively for N scale! Brand new coreless truck-motor drive paired with a super-heavy solid metal body mechanism; doubling the number of motors while increasing the traction potential and weight for new standard of running smoothness and pulling power. Prototype Information: The General Electic P42 locomotive is also known as the “Genesis” locomotive. The P42 is a modern 4200 horsepower passenger locomotive used across the United States and Canada. Amtrak’s P42 has replaced the EMD F40PH in revenue service and today they are used throughout the United States. Since their introduction, they have had a number of physical revisions to improve the ease of maintenance and parts replacements, including a bolt-on fiberglass nose panel (replacing the original’s solid metal which was difficult to repair or replace) and a new headlight bezel that is more rounded than the previous square versions. More Information Item # 37-6113 Scale HO Locomotive Type Diesel Engine Style P40 - P42 Genesis Engine Electronics DC Road Name Amtrak Discount Coupons No Free USA Shipping Yes

Read more less

The TSU-4400 is designed for models with higher stall currents such as some S, O, and large scale locomotives; this decoder features easy-to-use terminal blocks for no-fault wiring and a higher audio amplifier for awesome volume, indoors or out. You will feel like you are in the cab with the amazing new features that Tsunami2 has to offer including: Reactive Dynamic Digital Exhaust, Functioning locomotive and train brakes, injectors, power reverse, and firebox flicker. We also offer a large selection of selectable sound effects including: exhaust chuffs(10), prime movers (up to 12), bells (12), Whistles (90), airhorns (40+), couplers, dynamos and more! This 4-amp, universal-style format decoder includes a connector to easily add a CurrentKeeper (P.N. STX810140) to maintain performance over dirty track and switches. Product Specifications: Sound Profile: Baldwin & Other Diesel Dimensions: 69 x 30.5 x 14mm Max. Motor Stall Current: 4A Max. Function Current: 400mA (each output) Function Outputs: 6 Audio Amplifier: 3 Watt, 8-Ohm Load DCC Track Voltage: 7.5V – 26V Sound Channels: 16

Read more less

The TSU-4400 is designed for models with higher stall currents such as some S, O, and large scale locomotives; this decoder features easy-to-use terminal blocks for no-fault wiring and a higher audio amplifier for awesome volume, indoors or out. You will feel like you are in the cab with the amazing new features that Tsunami2 has to offer including: Reactive Dynamic Digital Exhaust, Functioning locomotive and train brakes, injectors, power reverse, and firebox flicker. We also offer a large selection of selectable sound effects including: exhaust chuffs(10), prime movers (up to 12), bells (12), Whistles (90), airhorns (40+), couplers, dynamos and more! This 4-amp, universal-style format decoder includes a connector to easily add a CurrentKeeper (P.N. STX810140) to maintain performance over dirty track and switches. Product Specifications: Sound Profile: Electric Dimensions: 69 x 30.5 x 14mm Max. Motor Stall Current: 4A Max. Function Current: 400mA (each output) Function Outputs: 6 Audio Amplifier: 3 Watt, 8-Ohm Load DCC Track Voltage: 7.5V – 26V Sound Channels: 16

Read more less

This industry leading coupler features plastic standard coupler with metal knuckle, and #621 torsion centering spring and comes complete with #233 insulated draft gearbox and lid. The #34 Magne-Matic® Plastic Coupler is designed mostly for body mounting with limited space either above or below the mounting platform, with or without Draft Gear Box Lid and with Draft Gearbox Lid either on top or bottom. Note: The 30-Series Torsion Spring can be mounted either below or above the coupler shank, but must always be mounted between the Coupler Spring Lid and Draft Gearbox. The #144 Whisker® Metal Coupler mounted in a #252 Snap-together Gearbox is equivalent to the #34 Coupler. The Whisker® Coupler mounted in a #252 Snap-together Gear box makes for simple and easy assembly. It is not recommended to use a metal coupler directly on a metal surface or in a metal draft gearbox to avoid possible electrical crossover and shorting that may cause damage. HO-Scale Package Includes: (2) Pair #34 Plastic Shank Couplers - Short Underset Shank (2) Pair #621 Torsion Centering Spring (2) Pair #233 Gearboxes & Lids (2) Pair #210 Washers (2) Pair #256 - 2-56 Screws (2) #622 Knuckle Springs #34 Plastic Coupler Features: Material  -   Metal Knuckle, Plastic Coupler Shank Shank Length  -   Short (1/4") (center hole to back of coupler head) Coupler Offset  -   Underset Knuckle Spring  -   #622 Centering System  -   Standard Shank Centering Spring  -   #621 Torsion Centering Spring Head  -   Standard Head Works With  -   #233 draft gearboxes #233 Plastic Draft Gearboxes & Lids Features: Material  -   Insulated Plastic Dimensions  -   3/8"L x 5/16"W x 9/64"H Works With  -   NO.5®, #58, 20-Series Couplers #34 in a #233 gearbox on top. Mounting Specifications: Mounting Height  -   29/64" Centerline  -   25/64" Trip Pin Height  -   1/32" Center Hole  -   2-56 Insulated Screws are the most commonly used. (Screw length will vary) #34 in a #233 gearbox on bottom. Mounting Specifications: Mounting Height  -   13/32" Centerline  -   25/64" Trip Pin Height  -   1/32" Center Hole  -   2-56 Insulated Screws are the most commonly used. (Screw length will vary) Recommended Tools: #206 Insulated Multi-Purpose Coupler Height Gauge #231 Greas-em Dry Graphite Lubricant #237 Coupler Trip Pin Pliers #240 Double Headed Pin Vise #241 Dual Tool Manual Uncoupling Tool and Spring Pick #246 Tap (2-56) and Drills (#50 and #43) #1020 Coupler & Special Purpose Tweezers  

Read more less

This industry leading coupler features plastic standard coupler with metal knuckle, and #621 torsion centering spring and comes complete with #233 insulated draft gearbox and lid. The #31 Magne-Matic® Plastic Coupler is designed mostly for body mounting with limited space either above or below the mounting platform, with or without Draft Gear Box Lid and with Draft Gearbox Lid either on top or bottom. Note: The 30-Series Torsion Spring can be mounted either below or above the coupler shank, but must always be mounted between the Coupler Spring Lid and Draft Gearbox. The #141 Whisker® Metal Coupler mounted in a #252 Snap-together Gearbox is equivalent to the #31 Coupler. The Whisker® Coupler mounted in a #252 Snap-together Gear box makes for simple and easy assembly. It is not recommended to use a metal coupler directly on a metal surface or in a metal draft gearbox to avoid possible electrical crossover and shorting that may cause damage. HO-Scale Package Includes: (2) Pair #31 Plastic Shank Couplers - Long Underset Shank (2) Pair #621 Torsion Centering Spring (2) Pair #233 Gearboxes & Lids (2) Pair #210 Washers (2) Pair #256 - 2-56 Screws (2) #622 Knuckle Springs #31 Plastic Coupler Features: Material  -   Metal Knuckle, Plastic Coupler Shank Shank Length  -   Long (25/64") (center hole to back of coupler head) Coupler Offset  -   Underset Knuckle Spring  -   #622 Centering System  -   Standard Shank Centering Spring  -   #621 Torsion Centering Spring Head  -   Standard Head Works With  -   #233 draft gearboxes #233 Plastic Draft Gearboxes & Lids Features: Material  -   Insulated Plastic Dimensions  -   3/8"L x 5/16"W x 9/64"H Works With  -   NO.5®, #58, 20-Series Couplers #31 in a #233 gearbox on top. Mounting Specifications: Mounting Height  -   29/64" Centerline  -   25/64" Trip Pin Height  -   1/32" Center Hole  -   2-56 Insulated Screws are the most commonly used. (Screw length will vary) #31 in a #233 gearbox on bottom. Mounting Specifications: Mounting Height  -   13/32" Centerline  -   25/64" Trip Pin Height  -   1/32" Center Hole  -   2-56 Insulated Screws are the most commonly used. (Screw length will vary) Recommended Tools: #206 Insulated Multi-Purpose Coupler Height Gauge #231 Greas-em Dry Graphite Lubricant #237 Coupler Trip Pin Pliers #240 Double Headed Pin Vise #241 Dual Tool Manual Uncoupling Tool and Spring Pick #246 Tap (2-56) and Drills (#50 and #43) #1020 Coupler & Special Purpose Tweezers

Read more less

This industry leading coupler features plastic standard coupler with metal knuckle, and #621 torsion centering spring and comes complete with #233 insulated draft gearbox and lid. The #36 Magne-Matic® Plastic Coupler is designed mostly for body mounting with limited space either above or below the mounting platform, with or without Draft Gear Box Lid and with Draft Gearbox Lid either on top or bottom. Note: The 30-Series Torsion Spring can be mounted either below or above the coupler shank, but must always be mounted between the Coupler Spring Lid and Draft Gearbox. The #146 Whisker® Metal Coupler mounted in a #252 Snap-together Gearbox is equivalent to the #36 Coupler. The Whisker® Coupler mounted in a #252 Snap-together Gear box makes for simple and easy assembly. Other Whisker® Coupler #36 equivalent options include #156 Whisker® "Scale" Metal Coupler when mounted a #252 Snap-together Gearbox. It is not recommended to use a metal coupler directly on a metal surface or in a metal draft gearbox to avoid possible electrical crossover and shorting that may cause damage. HO-Scale Package Includes: (2) Pair #36 Plastic Shank Couplers - Long Centerset Shank (2) Pair #621 Torsion Centering Spring (2) Pair #233 Gearboxes & Lids (2) Pair #210 Washers (2) Pair #256 - 2-56 Screws (2) #622 Knuckle Springs #36 Plastic Coupler Features: Material  -   Metal Knuckle, Plastic Coupler Shank Shank Length  -   Long (25/64") (center hole to back of coupler head) Coupler Offset  -   Centerset Knuckle Spring  -   #622 Centering System  -   Standard Shank Centering Spring  -   #621 Torsion Centering Spring Head  -   Standard Head Works With  -   #233 draft gearboxes #233 Plastic Draft Gearboxes & Lids Features: Material  -   Insulated Plastic Dimensions  -   3/8"L x 5/16"W x 9/64"H Works With  -   NO.5®, #58, 20-Series Couplers #36 in a #233 gearbox on top. Mounting Specifications: Mounting Height  -   1/2" Centerline  -   25/64" Trip Pin Height  -   1/32" Center Hole  -   2-56 Insulated Screws are the most commonly used. (Screw length will vary) #36 in a #233 gearbox on bottom. Mounting Specifications: Mounting Height  -   29/64" Centerline  -   25/64" Trip Pin Height  -   1/32" Center Hole  -   2-56 Insulated Screws are the most commonly used. (Screw length will vary) Recommended Tools: #206 Insulated Multi-Purpose Coupler Height Gauge #231 Greas-em Dry Graphite Lubricant #237 Coupler Trip Pin Pliers #240 Double Headed Pin Vise #241 Dual Tool Manual Uncoupling Tool and Spring Pick #246 Tap (2-56) and Drills (#50 and #43) #1020 Coupler & Special Purpose Tweezers

Read more less

HO Scale Lasor Kit (Assembly Required) Charcoal Gray Slate Shingles  Item Number: 223 Building not include, these are just slate shingles.

Read more less

This 3/4 size coupler has an extended Trip Pin mounted on a narrow gauge coupler to use with light duty old time equipment. The #711 & #712 works with Kadee's® full size HO-Scale Couplers. With this smaller coupler, gathering will not be as great nor can they bear the same loads as Kadee's® HO Couplers. They should easily handle loads common to the pre-1900 era. This industry leading coupler features a plastic coupler and coil centering spring and comes complete with a insulated draft gearbox and lid. The #711 Magne-Matic® Split Shank Couplers may be body mounted on any flat surface; HO-Scale locomotives or rolling stock.(The #702 Coupler Assembly Fixture can be used to ease assembly) It is not recommended to use a metal coupler directly on a metal surface or in a metal draft gearbox to avoid possible electrical crossover and shorting that may cause damage. Unassembled Kit 0-48 or 0-80 screws are the most commonly used screws.Screw length will very depending on the mounting situation.Package Includes: (2) Pair Unassembled Split Shank Couplers (2) Pair Unassembled Gearboxes & Lids (5) Each #711 Trip Pins (6) Each #636 Centering Springs (4) Each #402 Self Tapping Screws 0-48 x 1/4" #711 Split Shank Coupler Features: Material  -   Plastic Shank Length  -   (3/16") Coupler Offset  -   Centerset #711 Gearbox Features: Material  -   Insulated Plastic Dimensions  -   27/64"L x 15/64"W x 1/8"H Mounting Specifications: Mounting Height  -   11/32" Centerline  -   9/32" Trip Pin Height  -   1/32" Center Hole  -  0-48 Screw. (Screw length will vary) no less then 1/4" length.

Read more less

Use to light city streets, sidewalks, downtown areas, parks, bridges and more. 20mA set Dimensions - 0.417" w x 1.874" h (10.6 mm w x 47.6 mm h) RoHS Compliant

Read more less

Show off your patriotism with Old Glory waving in the wind. US Flag - Wall Mounts are available in three sizes and work for multiple scales. They feature a United States flag hanging from a metal pole and a mounting bracket. Display your flag outside your home, church, small business, or on the buildings down Main Street. US Flags include a Just Plug Spotlight to highlight the Flag.

Read more less

Use to light street corners, residential walkways, parks and more. 20mA set Dimensions - 0.102" w x 1.126" h (2.6 mm w x 28.6 mm h) RoHS Compliant

Read more less