Coupons

TRAIN-13 LI-ION 18.5V / 3.5Ah Great for "dead rail" model railroad installations in locomotive (most likely G-scale or LGB) or trailing power cars. Approximate Dimensions: 1.38" x 2.20 x 2.64" Weight: .55lb Connector: 20AWG JST SM Max Continuous Discharge: 6A Overdischarge protection: Yes Overcharge protection: Yes Recommended Charge Current: 1A Short Circuit Protection: Yes Please fully charge battery prior to storage. Batteries should be charged every 3 months during periods of storage. 

Read more less

The PWR-56 is a Power Supply that can be used to supply power for your locomotives, turnouts and other accessories. The PWR-56 has 56 Watts of output power! That is enough power to drive 15 or more typical modern HO scale locomotives! Further, each PWR-56 is equipped with Direct Radio, so a RailPro controller can be used to control, setup, and monitor the PWR-56. Also, the PWR-56 can be used as a Direct Radio Repeater. Package Contents: PWR-56 Module PA-2 Power Adapter 110 VAC Power Cable User Manual   Ring Engineering's AccuClean Power technology in TM the PWR-56 maintains a clean stable output voltage Clean that stays within about 3% from no load to full load! Typical model railroad power supplies can have voltage drops as high as 30% at full load. Unlike typical model railroad power supplies, when you need full power, your Ring Engineering PWR-56 will deliver! Direct Radio allows RailPro components to communicate with each other without any wires! Direct Radio is very fast giving your RailPro products quick response to your commands. Also, Direct Radio has two-way communication that allows your PWR-56 to transmit and receive information! Because the PWR-56 has Direct Radio, you can control, setup, and monitor your PWR-56 with any RailPro controller, such as the HC-2 with color touch screen. With a RailPro controlling device, you can turn the output to the track on or off, adjust settings, monitor the output power your PWR-56 is delivering, and more! Setting up your RailPro system is easy. To control and setup your PWR-56 simply press the "Find Produce button on a RailPro controller such as the HC-2, then the RailPro Controller will automatically load a picture of your PWR-56! You can take control of your PWR-56 by touching the picture of the PWR-56 on the screen! The PWR-56 has built in Short Circuit Protection with Auto Recovery to protect your trains and equipment in case of a derailment or other rail-to-rail short! Add multiple PWR-56's to your layout to increase the total amount of power for larger layouts.  

Read more less

Diffuses light evenly throughout when lights are on and eliminates the need for a building interior. Blocks outside view through the windows of an empty building, while still allowing light to shine through the windows from the inside. Use the optional Window Tint together with Diffusing Film to make windows appear dark when lights are off. Material is easy to apply. Tint and Film will each cover approximately 216 in2 (13.9 dm2) of window space.

Read more less

The TSU-21PNEM8 is a 1-amp Digital Sound Decoder with 8 function outputs. It is designed for easy plug-in operation when mated to a 21-pin NEM connector. You will feel like you are in the cab with the amazing new features that Tsunami2 has to offer including: Reactive Dynamic Digital Exhaust, Functioning locomotive and train brakes, injectors, power reverse, and firebox flicker. They also offer a large selection of selectable sound effects including: exhaust chuffs(10), prime movers (up to 12), bells (12), Whistles (90), airhorns (40+), couplers, dynamos and more! This decoder includes a connector to easily add a CurrentKeeper (P.N. 810140) to maintain performance over dirty track and switches. Sound Profile: GE Diesel Dimensions: 30.5 x 15.5 x 6.5mm  Max. Motor Stall Current: 1A Max. Function Current: 100mA (each output) Function Outputs: 8 Audio Amplifier: 2 Watt, 8-Ohm Load DCC Track Voltage: 7.5V – 22V Sound Channels: 16

Read more less

MTO TRAIN-18 LI-ION Battery 14.8V/3.5Ah Great for "dead rail" model railroad installations in locomotive (may work in some HO scale applications, G-scale or LGB) or trailing power cars.   Approximate Dimensions: 1.47" x 1.65 x 2.67" Weight: .45lb Connector: 20AWG JST SM Max Continuous Discharge: 6A Overdischarge protection: Yes Overcharge protection: Yes Recommended Charge Current: 1A Short Circuit Protection: Yes Please fully charge battery prior to storage. Batteries should be charged every 3 months during periods of storage. 

Read more less

#520 - 33" Diameter Smooth Back Wheelsets (Code 110) - HO Scale Smooth wheelsets are most commonly found on diesel era rolling stock. Kadee® wheel sets are manufactured to the most exacting standards and feature: RP-25 contour, non-magnetic metal wheels and insulated needlepoint axles. Twelve Sets (1 Set = 1 Axle) Axle Tip to Tip: 1.018" Wheelset Features: Code 110 (.110") 33" Smooth Back Wheels Accurate markings Incredible detail true to prototype Non-magnetic Metal Wheels Smooth tracking Free rolling Contoured Insulated Axles RP-25 Free rolling wheels Needlepoint Axles Axle Tip to Tip: 1.018" Freight & Passenger Package Includes: (12) Sets #520 33" Diameter Smooth Back Wheelsets (Code 110)   The term Code 110 and Code 88 relates to the width of the wheels and has no relationship to track code. Code 110 wheels are .110" wide and Code 88 are .088" wide. Code 110 wheels are the common (or "Standard") width wheels and Code 88 are what is called "Semi-Scale" and are used when the modeler wants a more prototypical looking wheel width. Actual HO-Scale prototypical wheel width would be around .067" wide and although they will run OK on the average track they will not go through common turnouts and crossings. Code 88 (.088") is just about the minimum width of wheel that will run on most standard or common track if gauged correctly. It really is a matter of appearances because there's very little operational differences between running Code 110 or Code 88 wheels. Code 88 wheels look really good and are most noticeable on open frame cars like hoppers and tank cars. However, they also look great on boxcars, gondolas, and reefers but not quite as noticeable. As mentioned above track code and wheel code have no relationship meaning Code 110 and Code 88 will run on most any code of track. Track code is simply the measured height of the rail, code 100 is .100" tall, code 83 is .083" tall, code 70 is .070" tall, and so on.

Read more less

Power your HO railroad's flagship streamliners with WalthersProto E8 and E9 diesels! Introduced in 1948 with the new and more powerful 567B prime mover, production contiued until 1954 when the virtually identical E9 debuted with the 567C prime mover. Fast, powerful and economical, EMD's E units handled premiere long-distance trains for decadess, with many ending their long careers in commuter service and ocassionally handling fast freight trains. Fully assembled and ready for service, features of these superb replicas include: One time run of these roadnumbers, order now - limited quantity available! Available with LokSound 5 for DCC or DC layouts Road- and era-specific details Matching, powered A-A or A-B units available separately Rugged and reliable WalthersProto drive 21-pin DCC plug Formed wire grab irons and handrails Photo-etched lift rings Cab interior w/seats and figures All-wheel drive and electrical pickup Constant and directional LED lights Correct size RP-25 metal wheels Proto MAX(TM) metal knuckle couplers  Road-specific features of this WalthersProto replica include: Nathan five-chime (all forward) air horn Single horizontal sealed-beam headlight Working backup light Flush number boards Removed skirts Freight pilot Southern-style MU bracket 4-hose MU set at left and right Photo-etched E8A-style Farr air grilles Dynamic brake with 48" fan Winterization hatches w/levers Single offset steam generator Rooftop air reservoirs w/piping Round spark arrestors Rectangular air vent Roller bearing sideframes Wheel slip hubs Speed recorder Southern-style left and right water tanks More Information Item # 920-42922 Brand WalthersProto Scale HO Engine Electronics DC, DCC & Sound Type EMD Diesel Road Name Southern Road Number 6900

Read more less

HO Scale Includes 15 Figures All figures are painted

Read more less

Street People Figures (9) N Scale 9 Pack

Read more less

Whether you're looking for a getaway in the woods or a home with some country appeal, the Rustic Cabin is the perfect place to sit back and relax in a rocking chair. The Rustic Cabin features old board and batten siding, a covered porch and shake shingle roof. Two rocking chairs on the porch provide a convenient location to watch a sunrise, and a milk can sits off to the side. Additional features include a pile of wood to prepare for cold nights, a wood stove pipe, a bent TV antenna, and an electric meter on the back of the cabin. This Built-&-Ready Landmark Structure comes with a pre-installed LED porch light made for use with the Just Plug Lighting System. 20mA RoHS Compliant Colors may vary from actual product.

Read more less

Bar Mills has solved a modeling dilemma for HO Scale modelers: adding realistic sidewalks to street scenes. Sidewalks from Bar Mills are made from a specially imported paper material that has the proper texture and thickness. The sidewalks come precolored in a dirty concrete color, are laser-cut to size and include laser-etched crack and curb lines. The material is flexible, so applying them to your layout surface is easy even if there are grades or surface irregularities along the pavement's edge. HO Scale Laser Cut Wood Kit 300 Scale feet of laser cut wood sidewalk

Read more less

Low end kits may bring minimal profits, BUT they also help introduce new people to the hobby… something we take very seriously. There isn’t a model railroad on the planet that can’t use these buildings, especially for the price ! HO Scale

Read more less