Perhaps you are familiar with this scenario: there is a digital decoder sitting on your workbench and you want to test it prior to a perhaps complex installation. But how to do this? The Profi Decoder tester makes it easy for you: simply connect the tester to your command station or the LokProgrammer. It enables you to test any decoder without exposing it to any external factors caused by the locomotive that may influence its performance. Features In order to make things as easy as possible for you, the Profi Decoder Tester is equipped with some useful features. It has all commonly used interface sockets for connecting a decoder for the smaller scale models: Besides a 6-pole NEM 651 socket and the 8-pole NEM 652 socket, it also has an 21MTC interface as per NEM 660, a PluX22 socket as well as a Next18 interface: No matter which type of decoder you have: Simply plug it in – it will fit! And that’s all there is to it! Decoders without any interface can be contacted with individual terminals.  A quality coreless motor with flywheel serves in conjunction with LEDs indicating the direction for checking the motor output: Thus it is quite easy to check on the low speed performance and the even speed of the decoder. An LED monitor informs you about the functioning of the headlights and back-up lights as well as the function outputs AUX1 through AUX6. For testing LokSound decoders we have integrated a 20 mm speaker. You may choose if the integral speaker should be switched off or if it should have 100 Ohm respectively 16 Ohm – thus the Decoder Tester is perfectly suitable for any ESU decoder generation! Two SUSI plugs facilitate the direct test of optional SUSI modules as well as the connection to another circuit board. The electrical connection to either the command station or the LokProgrammer is facilitated by a removable, 2-pole terminal block (same system as used on the LokProgrammer and the ECoS) or via two solder points. The dimensions of the ESU Decoder Tester are 99 x 74 x 34mm. WARNING: This product can expose you to a chemical, which is known to the State of California to cause Cancer and Reproductive Harm - For more information go to www.P65Warnings.ca.gov

Read more less

Built-&-Ready® Landmark Structure®, Kids Clubhouse, is the local hangout for the neighborhood kids. This rickety building was scabbed together and built entirely from scraps. The exterior is decorated with hand-painted messages and salvaged road and business signs. One window is curtained off with burlap potato sacks, while another is jammed with a car window, held in place by a bedframe. A ladder covered in paint stains leans against the building, leading up to the lookout point located on the rusty tin roof. A checkered race flag signals the club's unity. There are two access points to the building: a weathered door and a hidden crawl space. Additional details include a tattered car seat resting on cinderblocks and a reclaimed wooden spool for a side table. The shack can be placed in the backyard of a home, in the middle of the woods or anywhere kids want a clubhouse. Dimensions: 29/32 x 23/32 x 21/32" or 1.66 x 1.82 x 1.66" Colors may vary from actual product. More Information Item # BR4962 Brand Woodland Scenics Scale N Type Assembled Building Availability In-Stock/Restockable TCA Grading C-10 Mint - Brand New

Read more less

Sure to be the focal point of any HO Scale engine terminal, this Walthers Cornerstone 130' Motorized Turntable is where steam locomotives, and later diesels, were turned around at the end of their runs. Normally serving a roundhouse, most were also placed for access to backshop facilities and servicing tracks. This 130' turntable was about as big as they come - large enough to turn a 4-8-8-4 Big Boy and other large, modern engines. On your layout use the 130' Motorized Turntable as the heart of your servicing facility alongside other Cornerstone railroad maintenance structures Typical of tables built from 1900s on - some still in service today 130' 39.6m length holds locos up to 18-7/8" 46.1cm long - big enough for a 4-8-8-4! Fits most engine terminals User-friendly, illustrated instructions simplify operation and programming Layout mounting templates for pit and Cornerstone Turntable Control Box Control Box included for use on layouts with DC or DCC train control New Cornerstone Turntable Control Box for simple operation and programming with: Programmable indexing for up to 99 different tracks One-touch 180-degree bridge rotation in either direction Simplified LED display with adjustable brightness Operable from up to four remote locations with additional Control Boxes (933-2320 each sold separately) Comes complete with motor and Control Box, operates on 12-18v AC, 16-24v DC power supply (power supply not included) Comes with Code 83 rail installed on bridge Requires 18-1/4" 45.6cm mounting hole, 19-1/8" 47.8cm overall diameter Optional: To control turntable operation with DCC throttle or serial UART controller, purchase Cornerstone Advanced Control Module (933-2321, available separately)

Read more less

Small town or big city, the Cornerstone(R) Vintage Bowling Alley adds realistic detail to any busy HO street scene! This classic structure kit comes complete with large building-mounted "BOWLING," pins and ball, plus nonworking roadside sign and full-color printed graphics. Other features include: Fits 1950s to the present Perfect addition to city out lot or as a freestanding small town business 3-D "Bowling," pins & ball, plus freestanding street sign (nonworking) Printed interior and marquee signs included Authentic cinder block and decorative brick wall details Separate large pane windows and traditional "glass" entry/exit doors Roof-mounted air conditioners and large vents Separate electrical box, gas meter and downspouts Detailed base with sidewalks Molded in five colors and clear plastic Measures: Main Building - 12-3/8 x 7-7/16 x 3" 31.4 x 18.8 x 7.6cm Street Sign - 2-1/4 x 1-3/16 x 5-3/16" 5.7 x 3 x 13.1cm Molded in five colors and clear plastic Finish your scene with Cornerstone (933-3544 Asphalt or 933-3540 Concrete) or SceneMaster(TM) (949-1260) Parking Lots each sold separately  More Information Item # 933-4118 Brand Walthers Cornerstone Scale HO Type Building Kit MSRP $64.98

Read more less

Bring big power to your HO railroad with the WalthersMainline SD75M! Built from 1995 to 1996 at the request of the Santa Fe for a higher horsepower unit (4300 versus 4000 for a standard SD70), most were later transferred to the new Burlington Northern & Santa Fe Railway following the 1995 merger, where many are still in service with BNSF. These units were built with the wide North American Safety Cab, thus the "M" (for "modified") in the model designation. Other features include: One time run of these roadnumbers, order now - limited quantity available! Correct North American Safety Cab per prototype Flush radiators per early production units Correct HTCR-1a or HTCR-1b trucks per prototype Brass Nathan K5 air horn Treadplate detail on walkways Minimum radius 18" (22" or larger recommended) Fully assembled LED Lighting includes: 21-Pin DCC plug Same powerful drive as WalthersProto(R) locos featuring: 5-pole skew-wound motor 14:1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Dual machined brass flywheels Heavy die cast metal chassis Cab interior 5000-gallon fuel tank w/road specific details Standard bell on conductor's side Molded drill starter points for grab irons - easily added with SD70-Series Diesel Detail Kit (910-261, sold separately) Correct size RP-25 metal wheels Proto MAX(TM) magnetic metal knuckle couplers  Road-specific details on this model include: High headlight HTCR-1a trucks Nose door with window  More Information Item # 11002 Brand WalthersMainline Scale HO Type EMD SD75M Engine Electronics Standard DC Road Name Santa Fe Road Number 222 MSRP $169.98

Read more less

Enjoy complimentary shipping! Bundle your purchases for even more savings with our free shipping option. (This offer is optional) Providing enough steam to power train heat and some air conditioning systems on postwar trains taxed the standard water supply of EMD F7 A units set-up for passenger service, prompting EMD to roll out the new FP7 in 1949. Though outwardly similar to the F7A, FP7s were actually four feet longer to accommodate bigger water tanks with a capacity of 950 US gallons. Standard passenger power into the Amtrak era and beyond (with some also handling freight chores), these WalthersProto replicas are fully assembled and ready for service with: One time run of these roadnumbers, order now - limited quantity available! Matches the prototypes' extended frame and body Railroad-specific details Five-pole, skew-wound, high-torque, high-efficiency can motor Helical gears with 14:1 ratio for smooth, ultra-quiet running Easy multiple-unit operation Correct RP-25 wheelsets Proto MAX(TM) magnetic metal knuckle couplers Road-specific details of this WalthersProto replica include: A unit details - Nathan M5 Air horn w/all bells forward Whip-style radio antenna w/conduit Freight pilot Knob-style sand hatch doors Late water filler Cab wind deflectors Etched-metal cab sunshades Standard type winterization hatch Vertical body louvers Photo-etched Farr vertical grilles Dual headlights - upper single, lower twin vertical More Information Item # 920-49546 Brand WalthersProto Scale HO Engine Electronics DC, DCC Ready Type EMD Diesel Road Name Chesapeake & Ohio Road Number 8005 & 8505 Estimated Release Date June 2024

Read more less

This bundle of HO- Scale Just Plug® Wooden Pole and Double Lamp Post Streetlights fills up one Light Hub (included). This variety pack of Streetlights fit all scenes on your layout, from busy downtowns to rural areas. Installation is as simple as drilling a hole and feeding the wires. LED Lights are warm white and include a Linker Plug. Bulk up on savings over buying individually with Value Packs. 12 Street Lights are ideal to add lighting to your entire layout! Includes:  12 Warm White LED Street Lights with 36" wire 6 Wooden Pole Street Lights 6 Double Lamp Post Street Lights 6 Extension Poles 4 Linker Plugs 1 Light Hub CTRL Port Plug (installed) 1 Double-sided Mounting Tape 2 Mounting Screws Illustrated Instructions   More Information Item # JP5902 Brand Woodland Scenics Scale HO Pack Size 12 MSRP $109.99

Read more less

Enjoy complimentary shipping!Bundle your purchases for even more savings with our free shipping option. (This offer is optional) Experience the golden age of railroading with the Rapido Trains 37035 Alco FA1-FB1 Set, meticulously crafted to replicate the iconic Pennsylvania Railroad 9603A and 9603B units. This HO scale model set is perfect for both collectors and hobbyists who appreciate historical accuracy and superior detail. Key Features: Authentic Design: Faithfully reproduces the distinctive look of the Pennsylvania Railroad’s FA1 and FB1 units, complete with accurate paint schemes and road numbers. High-Quality Construction: Features a heavy, die-cast chassis for durability and stability, ensuring smooth operation on your layout. Detailed Components: Includes separately applied grab irons, handrails, and etched metal grilles, enhancing the realism of the model. Powerful Performance: Equipped with a 5-pole motor and dual flywheels, providing reliable and efficient power for your freight operations. Lighting: Operating headlights, class lights, and back-up lights for added realism during night-time operations. Ready for DCC: Standard DC model with a 21-pin DCC-ready socket, allowing for easy conversion to digital command control. Historical Significance: The Alco FA1 and FB1 locomotives were pivotal in the transition from steam to diesel power in the mid-20th century. The Pennsylvania Railroad, known for its extensive and innovative fleet, utilized these units primarily for freight services, making them a staple on American railroads. Why Choose Rapido Trains: Rapido Trains is renowned for its commitment to quality and historical accuracy. Each model is designed with the utmost attention to detail, ensuring that you receive a product that not only looks great but also performs exceptionally well on your layout. Perfect for Collectors and Enthusiasts: Whether you’re a seasoned model railroader or just starting your collection, the Rapido Trains 37035 Alco FA1-FB1 Set is a must-have addition. Its blend of historical significance, detailed craftsmanship, and reliable performance makes it a standout piece in any HO scale collection. Order Yours Today: Don’t miss out on the opportunity to own this exquisite model. Add the Rapido Trains 37035 Alco FA1-FB1 Set to your collection and bring a piece of railroad history to life on your layout. More Information Item # 37035 Brand Rapido Trains Scale HO Type Alco FA1-FB1 Set Engine Electronics DC Only, DCC Ready Road Name Pennsylvania Railroad Road Number 9603A, 9603B MSRP $429.95

Read more less

Enjoy complimentary shipping!Bundle your purchases for even more savings with our free shipping option. (This offer is optional) In the early 1900s, 2-6-2 locomotives were developed for use on the prairies of the American Midwest, earning them the nickname "Prairies." These locomotives often outlasted their more modern and efficient counterparts in branchline operations, thanks to their relatively light weight, ability to operate effectively in reverse, and capable speed range. Features Include Precision motor Completely hidden drivetrain Electrically isolated motor to allow hardwiring of DCC decoder Operating puffing smoke unit (non-toxic smoke fluid included) Operating headlight Separately applied metal handrails Highly detailed painted bodies with precision graphics Die-cast chassis See-through drive wheels with spokes Metal siderods Blackened metal wheels with RP25 contours on locomotive Wire-free drawbar connection between locomotive and tender Magnetically operated E-Z Mate® Mark II coupler on the rear of the tender Performs best on 18" radius curves or greater Product Measurements: L 10 in., W 1.5 in., H 2 in. Retail Package Measurements: L 13 in., W 1.8 in., H 3.5 in More Information Item # 51504 Brand Bachmann Trains Scale HO Type Baldwin 2-6-2 Prairie with Smoke Engine Electronics DC & Smoke Road Name Southern Railway MSRP $199.00

Read more less

Enjoy complimentary shipping!Bundle your purchases for even more savings with our free shipping option. (This offer is optional) This is BLI's third production of the USRA Light and Heavy 2-8-2 designs in N scale, commonly called Heavy Mikados and Light Mikados! There were 233 original USRA Heavy 2-8-2's built plus another 957 copies, covering 23 railroads. It was an extremely successful design. The USRA Heavy Mikados used pretty much the same running gear as the Light Mik's, but the boilers were 10 inches larger in diameter and they had larger cylinders as well. Tractive effort was about 10% higher for the heavy 2-8-2's.As for the USRA Light Mikados, the USRA built 625 total, with 641 copies built after the USRA ended control. With copies, over 50 railroads used the USRA Light 2-8-2's.BLI's models follow the original designs closely. Railroad specific variations are not modeled on these locomotives. In this production run, we are offering several attractive fantasy paint schemes in addition to the prototypical USRA models. We also offer two painted and unlettered models (black) - - one heavy and one light.   Industry-leadingModel Features: Paragon4 Sound & Control System featuring ROLLING THUNDER Integral Dual-Mode Decoder with Back EMF for Superb Slow Speed Operation in DC and DCC Precision Drive Mechanism Engineered for Heavy Towing and Smooth Slow Speed Operation Die Cast Body with Die Cast Chassis for Maximum Tractive Effort Premium Caliber Painting Prototypically Accurate Paint Schemes and Road Numbers Many Separately Applied Details such as Handrails, Grab Irons, Piping, Whistle, and Bell Prototypical Headlight Prototypically Accurate Sounds for the USRA 2-8-2s Operating Microtrains-compatible Couplers Will Operate on Code 55, Code 70, and Code 80 Rail Minimum Operating Radius: 9.75 inches   Broadway Limited Imports is proud to introduce Paragon4: The new benchmark for premium HO sound-equipped locomotives. These DC and DCC-Sound equipped locomotives feature the ALL-NEW Paragon4 sound and control system. Each Paragon4 locomotive comes with BLI's own integral DCC Decoder factory installed. Paragon4 locomotives offer Dual Mode DC and DCC operation with superb back EMF motor control, improved DC motor control, built-in capacitor pack for more reliable electrical pick-up, industry best on-board sound with Rolling Thunder functionality, Pro Lighting Mode for prototypical light control, Switcher model for precise low speed control, recordable DCC operation for automated playback, and the same excellent detail level as Broadway Limited's Paragon3 Series models.   Paragon4 Sound & Control SystemFeatures: Operates in DC & DCC with improved DC speed control (use DCMaster for DC Sound) Built-In extra capacitance to navigate imperfect track Pro Lighting Mode offers individual control of all lights on model Switcher Mode for precise low speed control Record & Play Operation - Records and plays back sounds and movements once or repeatedly for automatic operation High Resolution Audio Quillable Horn for various whistle lengths and patterns Choice of 3 selectable Horns Alternate Whistle / Horn where applicable for locomotive with air horn and steam whistle - both the main whistle and alternate can be easily played Adjustable bell ringing interval for faster or slower bell Numerous user-mappable functions with available keys Multiple realistic passenger and crew sounds play on command Grade Crossing Automatic Signal Automatic Forward / Reverse Signal Prime Mover sound intensity varies with load Individually adjustable sound volumes for each effect EZ Reset Button for quick return to factory default settings More Information Item # 7861 Brand Broadway Limited Scale N Type USRA 2-8-2 Light Mikado Engine Electronics DC/DCC/Sound Road Name Pennsylvania Railroad Road Number 9630 MSRP $369.99

Read more less

Built-&-Ready® Landmark Structure®, Cozy Cabin, was designed for the outskirts and rural areas of a layout. The authentically weathered and hand-painted building is pre-lit and made for use with our Just Plug® Lighting System. This homey building features equally detailed interior and exterior features. Look inside through the screen door at the warm, flickering 3D fireplace in the center of the back wall with a rocking chair resting next to it. Pots, pans, lanterns and deer and fish mounts clutter the walls. A giant bear rug cloaks the center of the wood floor. The building is made up of logs, sealed together with chinking and has a rusty tin roof with patches. The natural stone chimney was inspired by hand-picked creek rocks. Additional features include rock steps that lead up to the covered porch, a wash tub, wooden bench and a stack of split wood resting on the side of the building.

Read more less