Gift Ideas Under $100.00

Bowser HO Scale ready-to-run 70-Ton 2-Bay Covered Hoppers are based on Pullman-Standard prototypes built beginning in the mid 1950s and operated into the 2000s. They hauled cement, grain and other heavy, granular materials. These layout-ready freight cars feature injection-molded bodies with accurate decoration, molded details that stand up to layout operations, free-rolling trucks with metal wheels and magnetic knuckle couplers. The 70-Ton 2-Bay Covered Hopper model feature open or closed sides as appropriate for each scheme. They re great additions to your diesel-era freight trains.  HO Scale Features: • Ready to run • Road number 71306 • Roller Bearing Trucks with metal wheels • Interior & slope sheet braces and knuckle couplers. WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov

Read more less

Bowser HO Scale ready-to-run 70-Ton 2-Bay Covered Hoppers are based on Pullman-Standard prototypes built beginning in the mid 1950s and operated into the 2000s. They hauled cement, grain and other heavy, granular materials. These layout-ready freight cars feature injection-molded bodies with accurate decoration, molded details that stand up to layout operations, free-rolling trucks with metal wheels and magnetic knuckle couplers. The 70-Ton 2-Bay Covered Hopper model feature open or closed sides as appropriate for each scheme. They re great additions to your diesel-era freight trains.  HO Scale Features: • Ready to run • Road number 181463 • Roller Bearing Trucks with metal wheels • Interior & slope sheet braces and knuckle couplers.

Read more less

Bowser HO Scale ready-to-run 70-Ton 2-Bay Covered Hoppers are based on Pullman-Standard prototypes built beginning in the mid 1950s and operated into the 2000s. They hauled cement, grain and other heavy, granular materials. These layout-ready freight cars feature injection-molded bodies with accurate decoration, molded details that stand up to layout operations, free-rolling trucks with metal wheels and magnetic knuckle couplers. The 70-Ton 2-Bay Covered Hopper model feature open or closed sides as appropriate for each scheme. They re great additions to your diesel-era freight trains.  HO Scale Features: • Ready to run • Road number 181451 • Roller Bearing Trucks with metal wheels • Interior & slope sheet braces and knuckle couplers.

Read more less

MTO TRAIN-16 LI-ION 14.8V/.75Ah Great for "dead rail" model railroad installations in locomotive (G-scale or LGB) or trailing power cars.   Approximate Dimensions: 1.25" x 1.13" x 2.06" Weight: .20lb Connector: 20AWG JST SM Max Continuous Discharge: 2A Overdischarge protection: Yes Overcharge protection: Yes Recommended Charge Current: .5A Short Circuit Protection: Yes Please fully charge battery prior to storage. Batteries should be charged every 3 months during periods of storage.

Read more less

MTO TRAIN-32 LI-ION 11.1V / .75Ah Great for "dead rail" model railroad installations in locomotive (G-scale or LGB) or trailing power cars.   Approximate Dimensions: 4.00" x 1.125 x .75" Weight: .30lb Connector: 22AWG RED JST SYP Max Continuous Discharge: 1.5A Overdischarge protection: Yes Overcharge protection: Yes Recommended Charge Current: .50A Short Circuit Protection: Yes Please fully charge battery prior to storage. Batteries should be charged every 3 months during periods of storage.

Read more less

Betty's is a great building to use at the center of an action-packed layout scene. This three-story brick building includes flickering lighting effects that effectively create the illusion of an actively burning building. Custom painting and weathering add the finished touch of a scorched look. There are loads of details and scene-setting accessories, such as signage, a bicycle leaning up against the side of the building, dumpster, wrought iron fire escapes, window treatments and lots more! See photos for footprint. This structure comes with pre-installed LED lighting made for use with the Just Plug® Lighting System. 40mA RoHS Compliant Colors may vary from actual product.

Read more less

This industry leading coupler features plastic standard coupler with metal knuckle, and #621 torsion centering spring and comes complete with #233 insulated draft gearbox and lid. The #34 Magne-Matic® Plastic Coupler is designed mostly for body mounting with limited space either above or below the mounting platform, with or without Draft Gear Box Lid and with Draft Gearbox Lid either on top or bottom. Note: The 30-Series Torsion Spring can be mounted either below or above the coupler shank, but must always be mounted between the Coupler Spring Lid and Draft Gearbox. The #144 Whisker® Metal Coupler mounted in a #252 Snap-together Gearbox is equivalent to the #34 Coupler. The Whisker® Coupler mounted in a #252 Snap-together Gear box makes for simple and easy assembly. It is not recommended to use a metal coupler directly on a metal surface or in a metal draft gearbox to avoid possible electrical crossover and shorting that may cause damage. HO-Scale Package Includes: (2) Pair #34 Plastic Shank Couplers - Short Underset Shank (2) Pair #621 Torsion Centering Spring (2) Pair #233 Gearboxes & Lids (2) Pair #210 Washers (2) Pair #256 - 2-56 Screws (2) #622 Knuckle Springs #34 Plastic Coupler Features: Material  -   Metal Knuckle, Plastic Coupler Shank Shank Length  -   Short (1/4") (center hole to back of coupler head) Coupler Offset  -   Underset Knuckle Spring  -   #622 Centering System  -   Standard Shank Centering Spring  -   #621 Torsion Centering Spring Head  -   Standard Head Works With  -   #233 draft gearboxes #233 Plastic Draft Gearboxes & Lids Features: Material  -   Insulated Plastic Dimensions  -   3/8"L x 5/16"W x 9/64"H Works With  -   NO.5®, #58, 20-Series Couplers #34 in a #233 gearbox on top. Mounting Specifications: Mounting Height  -   29/64" Centerline  -   25/64" Trip Pin Height  -   1/32" Center Hole  -   2-56 Insulated Screws are the most commonly used. (Screw length will vary) #34 in a #233 gearbox on bottom. Mounting Specifications: Mounting Height  -   13/32" Centerline  -   25/64" Trip Pin Height  -   1/32" Center Hole  -   2-56 Insulated Screws are the most commonly used. (Screw length will vary) Recommended Tools: #206 Insulated Multi-Purpose Coupler Height Gauge #231 Greas-em Dry Graphite Lubricant #237 Coupler Trip Pin Pliers #240 Double Headed Pin Vise #241 Dual Tool Manual Uncoupling Tool and Spring Pick #246 Tap (2-56) and Drills (#50 and #43) #1020 Coupler & Special Purpose Tweezers  

Read more less

This industry leading coupler features plastic standard coupler with metal knuckle, and #621 torsion centering spring and comes complete with #233 insulated draft gearbox and lid. The #31 Magne-Matic® Plastic Coupler is designed mostly for body mounting with limited space either above or below the mounting platform, with or without Draft Gear Box Lid and with Draft Gearbox Lid either on top or bottom. Note: The 30-Series Torsion Spring can be mounted either below or above the coupler shank, but must always be mounted between the Coupler Spring Lid and Draft Gearbox. The #141 Whisker® Metal Coupler mounted in a #252 Snap-together Gearbox is equivalent to the #31 Coupler. The Whisker® Coupler mounted in a #252 Snap-together Gear box makes for simple and easy assembly. It is not recommended to use a metal coupler directly on a metal surface or in a metal draft gearbox to avoid possible electrical crossover and shorting that may cause damage. HO-Scale Package Includes: (2) Pair #31 Plastic Shank Couplers - Long Underset Shank (2) Pair #621 Torsion Centering Spring (2) Pair #233 Gearboxes & Lids (2) Pair #210 Washers (2) Pair #256 - 2-56 Screws (2) #622 Knuckle Springs #31 Plastic Coupler Features: Material  -   Metal Knuckle, Plastic Coupler Shank Shank Length  -   Long (25/64") (center hole to back of coupler head) Coupler Offset  -   Underset Knuckle Spring  -   #622 Centering System  -   Standard Shank Centering Spring  -   #621 Torsion Centering Spring Head  -   Standard Head Works With  -   #233 draft gearboxes #233 Plastic Draft Gearboxes & Lids Features: Material  -   Insulated Plastic Dimensions  -   3/8"L x 5/16"W x 9/64"H Works With  -   NO.5®, #58, 20-Series Couplers #31 in a #233 gearbox on top. Mounting Specifications: Mounting Height  -   29/64" Centerline  -   25/64" Trip Pin Height  -   1/32" Center Hole  -   2-56 Insulated Screws are the most commonly used. (Screw length will vary) #31 in a #233 gearbox on bottom. Mounting Specifications: Mounting Height  -   13/32" Centerline  -   25/64" Trip Pin Height  -   1/32" Center Hole  -   2-56 Insulated Screws are the most commonly used. (Screw length will vary) Recommended Tools: #206 Insulated Multi-Purpose Coupler Height Gauge #231 Greas-em Dry Graphite Lubricant #237 Coupler Trip Pin Pliers #240 Double Headed Pin Vise #241 Dual Tool Manual Uncoupling Tool and Spring Pick #246 Tap (2-56) and Drills (#50 and #43) #1020 Coupler & Special Purpose Tweezers

Read more less

This industry leading coupler features plastic standard coupler with metal knuckle, and #621 torsion centering spring and comes complete with #233 insulated draft gearbox and lid. The #36 Magne-Matic® Plastic Coupler is designed mostly for body mounting with limited space either above or below the mounting platform, with or without Draft Gear Box Lid and with Draft Gearbox Lid either on top or bottom. Note: The 30-Series Torsion Spring can be mounted either below or above the coupler shank, but must always be mounted between the Coupler Spring Lid and Draft Gearbox. The #146 Whisker® Metal Coupler mounted in a #252 Snap-together Gearbox is equivalent to the #36 Coupler. The Whisker® Coupler mounted in a #252 Snap-together Gear box makes for simple and easy assembly. Other Whisker® Coupler #36 equivalent options include #156 Whisker® "Scale" Metal Coupler when mounted a #252 Snap-together Gearbox. It is not recommended to use a metal coupler directly on a metal surface or in a metal draft gearbox to avoid possible electrical crossover and shorting that may cause damage. HO-Scale Package Includes: (2) Pair #36 Plastic Shank Couplers - Long Centerset Shank (2) Pair #621 Torsion Centering Spring (2) Pair #233 Gearboxes & Lids (2) Pair #210 Washers (2) Pair #256 - 2-56 Screws (2) #622 Knuckle Springs #36 Plastic Coupler Features: Material  -   Metal Knuckle, Plastic Coupler Shank Shank Length  -   Long (25/64") (center hole to back of coupler head) Coupler Offset  -   Centerset Knuckle Spring  -   #622 Centering System  -   Standard Shank Centering Spring  -   #621 Torsion Centering Spring Head  -   Standard Head Works With  -   #233 draft gearboxes #233 Plastic Draft Gearboxes & Lids Features: Material  -   Insulated Plastic Dimensions  -   3/8"L x 5/16"W x 9/64"H Works With  -   NO.5®, #58, 20-Series Couplers #36 in a #233 gearbox on top. Mounting Specifications: Mounting Height  -   1/2" Centerline  -   25/64" Trip Pin Height  -   1/32" Center Hole  -   2-56 Insulated Screws are the most commonly used. (Screw length will vary) #36 in a #233 gearbox on bottom. Mounting Specifications: Mounting Height  -   29/64" Centerline  -   25/64" Trip Pin Height  -   1/32" Center Hole  -   2-56 Insulated Screws are the most commonly used. (Screw length will vary) Recommended Tools: #206 Insulated Multi-Purpose Coupler Height Gauge #231 Greas-em Dry Graphite Lubricant #237 Coupler Trip Pin Pliers #240 Double Headed Pin Vise #241 Dual Tool Manual Uncoupling Tool and Spring Pick #246 Tap (2-56) and Drills (#50 and #43) #1020 Coupler & Special Purpose Tweezers

Read more less

HO Scale Lasor Kit (Assembly Required) Charcoal Gray Slate Shingles  Item Number: 223 Building not include, these are just slate shingles.

Read more less

This 3/4 size coupler has an extended Trip Pin mounted on a narrow gauge coupler to use with light duty old time equipment. The #711 & #712 works with Kadee's® full size HO-Scale Couplers. With this smaller coupler, gathering will not be as great nor can they bear the same loads as Kadee's® HO Couplers. They should easily handle loads common to the pre-1900 era. This industry leading coupler features a plastic coupler and coil centering spring and comes complete with a insulated draft gearbox and lid. The #711 Magne-Matic® Split Shank Couplers may be body mounted on any flat surface; HO-Scale locomotives or rolling stock.(The #702 Coupler Assembly Fixture can be used to ease assembly) It is not recommended to use a metal coupler directly on a metal surface or in a metal draft gearbox to avoid possible electrical crossover and shorting that may cause damage. Unassembled Kit 0-48 or 0-80 screws are the most commonly used screws.Screw length will very depending on the mounting situation.Package Includes: (2) Pair Unassembled Split Shank Couplers (2) Pair Unassembled Gearboxes & Lids (5) Each #711 Trip Pins (6) Each #636 Centering Springs (4) Each #402 Self Tapping Screws 0-48 x 1/4" #711 Split Shank Coupler Features: Material  -   Plastic Shank Length  -   (3/16") Coupler Offset  -   Centerset #711 Gearbox Features: Material  -   Insulated Plastic Dimensions  -   27/64"L x 15/64"W x 1/8"H Mounting Specifications: Mounting Height  -   11/32" Centerline  -   9/32" Trip Pin Height  -   1/32" Center Hole  -  0-48 Screw. (Screw length will vary) no less then 1/4" length.

Read more less

The #178 Kadee® Magne-Matic® Coupler features a "Scale" Metal Whisker® Coupler (a smaller head coupler which is more to scale and is patterned after the type 'E" couplers), insulated "Scale" Draft Gear Box and Lid with rear and center screw holes for mounting. 2-56 screws are the most commonly used for center hole. 0-48 or 0-80 screws are used for rear hole.Screw length will very depending on the mounting situation. It is not recommended to use a metal coupler directly on a metal surface or in a metal draft gearbox to avoid possible electrical crossover and shorting that may cause damage. Package Includes: (2) Pair #178 Scale Whisker® Metal Couplers - Medium Centerset Shank (2) Pair #178 Scale Snap-Together Gearboxes and lids (2) #625 Knuckle Springs #178 Scale Whisker® Metal Coupler Features: Material  -   Metal Shank Length  -   Medium (9/32") (center hole to back of coupler head) Coupler Offset  -   Centerset Knuckle Spring  -   #625 Centering System  -   Whisker® Head  -   "Scale" Head #178 Snap-Together Gearbox Features: Material  -   Insulated Plastic Lid Type  -   Snap-Together Dimensions  -   19/32"L x 17/64"W x 5/32"H Mounting Specifications: Mounting Height  -   29/64" Centerline  -   25/64" Trip Pin Height  -   1/32" Center Hole  -   2-56 Insulated Screws are the most commonly used. (Screw length will vary) Rear Hole  -  0-48 or 0-80 are the most commonly used. (Screw length will vary)

Read more less