In Stock

HO Scale Metal poles and arms Ready to use with resistors attached Designed for easy mounting 2 lights in the package

Read more less

Use to light city streets, sidewalks, downtown areas, parks, bridges and more. 20mA set Dimensions - 1.39" w x 6.252" h (35.3 mm w x 158.8 mm h) RoHS Compliant

Read more less

Quantity: One per packageThe WH-6 wiring harness is used with LM-3, LM-3S, LM-2, and LM-2S modules. It is used to wire in light outputs 5 and 6 and more. Please see LM instructions for actual wiring. WH-6 has a JST 6 pin with crimp style pins. We have found the crimp style pins to be far more dependable than the insulation displacement connectors.

Read more less

The LM-3 is a module that you can install into a model train locomotive so the locomotive can be controlled and setup by a Ring Engineering RailPro Controller, such as the HC-2 Handheld Controller with a Color Touch Screen! After the LM-3 is installed in a locomotive, you will be able to control the locomotive speed, direction, up to 6 light outputs! The LM-3 has “Direct Radio” (RF transceiver) built inside. The built in RF module allows commands and data to be sent and received to and from the module. You can load a picture of your choice into the LM-3 module. Then you will be able to touch the screen of the HC-2 to take control of your locomotive!The LM-3 is electrically compatible with the DCC plug found in many locomotives to promote easy installation. Product Specifications: Sound Profile: Universal (all) Dimensions: 1.50 x 0.68 x 0.25 in DCC Track Voltage: 7.5V – 18V Light Outputs 6   The LM-3 is equipped with Direct Radio! This allows Ring Engineering Controlling Devices such as the HC-2, Handheld Controller with Color Touch screen, to control and configure your locomotive by sending and receiving data directly to the LM-3 through the air by use of RF transmission! The Direct Radio is very fast giving your locomotive quick response to your controls. Further, a controlling device can detect your LM-3 with just a few touches on the screen. Because of Direct Radio, you can load a picture of your locomotive to the LM-3! You can also load Light Effects and much more!Radio Load Sharing is a truly an innovative invention from Ring Engineering. It allows your locomotives that are linked together (sometimes called Consisted or MU'ed) to actually share pulling power. Only RailPro equipped locomotives use Direct Radio to talk to each other to be sure each locomotive pulls its share of the load! Even more amazingly, Ring Engineering's patent pending process only takes seconds to setup!Six light outputs. Can be configured for multiple light effects on a single output including On/Off, Dim, Ditch, Mars, Strobe, and more! Additional light effects can be loaded using DirectRadio!Built in protection with fault reporting by Direct Radio!Tiny size 1.50 x 0.68 x 0.25 Inches for easy fit.

Read more less

Greas-em Dry Graphite Lubricant This fine, dry graphite lubricant is specially selected for use with Kadee® Couplers & Trucks. 5.5 gram tube Also an excellent general purpose lubricant for use all around the layout to reduce friction in moving parts and bearing surfaces. Add a puff inside your couplers, move them back-and-forth a few times to burnish and enjoy smooth action of your couplers. Ideal for reducing friction of moving parts and bearing surfaces. Package Includes: (1) Greas-em Dry Graphite Lubricant 5.5 gram tube

Read more less

The PWR-56 is a Power Supply that can be used to supply power for your locomotives, turnouts and other accessories. The PWR-56 has 56 Watts of output power! That is enough power to drive 15 or more typical modern HO scale locomotives! Further, each PWR-56 is equipped with Direct Radio, so a RailPro controller can be used to control, setup, and monitor the PWR-56. Also, the PWR-56 can be used as a Direct Radio Repeater. Package Contents: PWR-56 Module PA-2 Power Adapter 110 VAC Power Cable User Manual   Ring Engineering's AccuClean Power technology in TM the PWR-56 maintains a clean stable output voltage Clean that stays within about 3% from no load to full load! Typical model railroad power supplies can have voltage drops as high as 30% at full load. Unlike typical model railroad power supplies, when you need full power, your Ring Engineering PWR-56 will deliver! Direct Radio allows RailPro components to communicate with each other without any wires! Direct Radio is very fast giving your RailPro products quick response to your commands. Also, Direct Radio has two-way communication that allows your PWR-56 to transmit and receive information! Because the PWR-56 has Direct Radio, you can control, setup, and monitor your PWR-56 with any RailPro controller, such as the HC-2 with color touch screen. With a RailPro controlling device, you can turn the output to the track on or off, adjust settings, monitor the output power your PWR-56 is delivering, and more! Setting up your RailPro system is easy. To control and setup your PWR-56 simply press the "Find Produce button on a RailPro controller such as the HC-2, then the RailPro Controller will automatically load a picture of your PWR-56! You can take control of your PWR-56 by touching the picture of the PWR-56 on the screen! The PWR-56 has built in Short Circuit Protection with Auto Recovery to protect your trains and equipment in case of a derailment or other rail-to-rail short! Add multiple PWR-56's to your layout to increase the total amount of power for larger layouts.  

Read more less

The TSU-21PNEM8 is a 1-amp Digital Sound Decoder with 8 function outputs. It is designed for easy plug-in operation when mated to a 21-pin NEM connector. You will feel like you are in the cab with the amazing new features that Tsunami2 has to offer including: Reactive Dynamic Digital Exhaust, Functioning locomotive and train brakes, injectors, power reverse, and firebox flicker. They also offer a large selection of selectable sound effects including: exhaust chuffs(10), prime movers (up to 12), bells (12), Whistles (90), airhorns (40+), couplers, dynamos and more! The TSU-21PNEM8 can be wired to a CurrentKeeper (P.N. 810140) to maintain performance over dirty track and switches. Product Specifications: Sound Profile: EMD-2 Dimensions: 30.5 x 15.5 x 6.5mm Max. Motor Stall Current: 1A Max. Function Current: 100mA (each output) Function Outputs: 8 Audio Amplifier: 2 Watt, 8-Ohm Load DCC Track Voltage: 7.5V – 22V Sound Channels: 16

Read more less

The new ESU PowerPack Mini can be wired to all fourth and fifth generation ESU decoders. It reliably supplies energy to your locomotive when traversing dirty track or long turnout ladders. With its energy storage (1 Farad capacity) the unit supplies power to all light and motor functions as well as to the sound module. Subject to the energy consumption of your model it may continue to move for up to three seconds. The PowerPack Mini incorporates an integral charging circuit controlled by the decoder. Therefore it may be connected even during programming. In order to avoid an undue load on the booster in case there are several models in the same booster sector, the charging current is limited. The buffer time can be reduced by means of a CV. This may be useful to assure the correct stopping position ahead of signals showing the “Stop” aspect (red signal). Although it is considerably smaller than its predecessor, the space requirements of the PowerPack Mini of about 15.7 mm x 9.7 mm x 13 mm must be taken into account when installing this unit. A three-pole wire harness connects the PowerPack Mini to the decoder. The wires are already soldered to the PowerPack Mini and must be soldered to the appropriate solder pads of the decoder. More Information Item # 54671 Brand ESU Scale Multi WARNING: This product can expose you to a chemical, which is known to the State of California to cause Cancer and Reproductive Harm - For more information go to www.P65Warnings.ca.gov

Read more less

Detail postwar cities, towns, suburbs, industries and more with this classic Municipal Water Tower kit in HO! Seen all across North America, features of the model include: Thousands built from 1946 to early 1960s - many still in use today Detailed tank and supports designed for easy assembly Decals for easy customizing Molded in gray with steel guy wires Use alongside Cornerstone Built-Ups City Water Tower (#933-2825 Black or #933-2826 Silver), or Modern Water Tower Kit (#933-3528), each sold separately Kit - 3-5/16 x 3-5/16 x 11-1/8" or 8.4 x 8.4 x 28.2cm

Read more less

Brand: JT's Mega Steam Scent: Coffee Size: 2 Oz Glass Bottle with Eye Dropper Made in the USA

Read more less

TRAIN-11 LI-ION  Battery 18.5V / 6.0Ah Great for "dead rail" model railroad installations in locomotive (most likely G-scale or LGB) or trailing power cars. Approximate Dimensions: 3.65" x 1.50 x 2.85" Weight: 1.05lb Connector: 20AWG JST SM Max Continuous Discharge: 6A Overdischarge protection: Yes Overcharge protection: Yes Recommended Charge Current: 1A Short Circuit Protection: Yes Please fully charge battery prior to storage. Batteries should be charged every 3 months during periods of storage. 

Read more less

The Digitrax UT6 Utility Throttle is a versatile and user-friendly control device designed to enhance your model train experience. Perfect for hobbyists and professionals alike, this throttle offers precise control and a range of features to make operating your model trains easier and more enjoyable. Key Features: Compact and Ergonomic Design: The UT6 is designed for easy one-handed operation, making it comfortable to use for extended periods. Its compact size ensures it fits neatly in your hand, providing a seamless control experience. Color LCD Display: Equipped with a 1.5-inch color LCD display, the UT6 provides clear and easy-to-read information, allowing you to monitor and control your trains with ease. Full Numeric Keypad: The full numeric keypad allows for quick and easy locomotive selection, enabling you to access and control your trains efficiently. Fine Speed Control: The encoder knob offers fine speed control, giving you precise command over your locomotives’ movements. This feature is essential for smooth and realistic operation. Forward/Reverse Toggle Switch: The forward/reverse toggle switch with braking functionality ensures you can easily change directions and stop your trains safely. Battery Operated: The UT6 can be powered by AA batteries or the Digitrax BP600MH rechargeable battery pack, providing flexibility and convenience. LocoNet Compatibility: Works seamlessly with compatible LocoNet systems, allowing for easy integration into your existing setup. Infrared Operation: The UT6 supports Digitrax infrared operation with UR90, UR91, and UR92, providing wireless control options for added convenience. Locomotive Recall Feature: Easily recall previously used locomotive addresses, making it simple to switch between different trains during operation. Multi-Scale Compatibility: Suitable for use with multiple scales, including HO, N, and O, making it a versatile choice for various model train layouts. Why Choose the Digitrax UT6? The Digitrax UT6 Utility Throttle is not just a control device; it’s a comprehensive solution for enhancing your model train operations. Whether you’re a hobbyist looking to upgrade your setup or a professional seeking reliable and efficient control, the UT6 offers the perfect balance of functionality, performance, and ease of use. Applications: Model Train Layouts: Ideal for controlling multiple locomotives and managing complex train operations. Custom Projects: Suitable for custom model train projects where precise control and versatility are essential. Hobbyist and Professional Use: Perfect for both hobbyists and professionals looking to enhance their model train experience. Specifications: Display: 1.5-inch color LCD Power Source: AA batteries or BP600MH rechargeable battery pack Compatibility: LocoNet systems, infrared operation with UR90/91/92 Dimensions: Compact and ergonomic design Enhance Your Model Train Experience Upgrade your model train setup with the Digitrax UT6 Utility Throttle. Its user-friendly design, versatile features, and reliable performance make it the perfect choice for anyone looking to take their model train operations to the next level. More Information Item # UT6 Brand Digitrax Scale Multi Scale MSRP 115.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet / Specification Sheet

Read more less