In Stock

These flat cars have been specially modified to carry concrete railroad ties in Maintenance of Way trains for Amtrak. The car has a unique on-deck rail system to allow a gantry crane to traverse the cars to unload ties trackside. Founded in 1971, Amtrak is the largest North American passenger rail network serving more than 500 destinations in 46 states across 600 miles of track. More Information Item # 993 02 234 Brand Micro Trains Line Scale N Type 50' Straight-Side Flatcar w/Concrete Tie Load Kit 3-Pack Road Name Amtrak Road Numbers 15559, 15514, 15528 Release Date January 2024 MSRP 114.95 WARNING: This product can expose you to chemicals including Bisphenal A which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Read more less

These single-door boxcars with Roller Bearing trucks were used in general service by CSX. CSX was formed through the 1986 mergers of Chessie System and Seaboard System/ Family Lines, and continues to operate today across more than 21,000 miles of track in the Eastern United States. More Information Item # 993 00 220 Brand Micro Trains Line Scale N Type 50' Boxcar with 10' Door, No Roofwalk Road Name CSX Road Numbers 143237, 143247, 143225, 143212 Release Date February 2024 MSRP 119.95 WARNING: This product can expose you to chemicals including Bisphenal A which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Read more less

21MTC NEM660 Interface Version The LokPilot 5 DCC is the "twin brother" of the LokPilot 5. The two share almost all characteristics, however, the LokPilot 5 DCC is a pure DCC decoder and cannot be used on analog AC systems. This lack of flexibility comes with a cheaper price. LokPilot 5 decoders are offered with all common interfaces.  Modes The LokPilot 5 DCC is a "pure-bred" DCC decoder. 14 to 128 speed steps are as natural as 2- and 4-digit addresses. Up to 32 functions can be triggered. Thanks to RailComPlus® the decoders register automatically with a suitable DCC system like the ESU CabControl. The decoder accepts all DCC programming modes and thanks to RailCom® the CV values ​​can be read on the main track with RailCom equipped DCC systems. For command stations that only program the CVs from 1-255 auxiliary CV registers exist. The LokPilot 5 DCC decoder recognizes the Märklin® braking sections as well as the ZIMO® HLU / ZACKCommands or the Lenz® ABC system. Also braking with DCC brake modules or with DC voltageis possible. It also stops with a Selectrix® brake diode. An ABC automatic shuttle trainenables automatic commuting between two train stations. The LokPilot 5 DCC decoder can be used on analog DC trains. The top speedcan be set separately. The decoder switches between the operating modes fully automatically "on-the-fly". Features We know that you want your locomotives to be as realistic as possible. Therefore we have the LokPilot 5DCC packed with function outputs. Depending on the interface version, each LokPilot offers 5 DCCDecoder at least 10 amplified function outputs with 250mA output current each. In the executionswith PluX22 or 21MTC interface there are 4 outputs to control servos orLogic level outputs added. All-important lighting functions are available. The brightness of each outputcan be set separately. The decoder masters automatic pushing and pullingwhen uncoupling for ROCO®, Krois® and Telex® couplings. Motor control The engine control of the LokPilot 5 DCC has been fundamentally improved again. A variably adjustablePWM clock frequency from 10kHz to 50kHz ensures super quiet operation, especially with bell-armature motors.Operation - The typical “hum” is a thing of the past. The load control now has up to10 CVs  which can be adjusted for difficult cases. The unique "Autotune" function enablesthe automatic calibration of the decoder to the motor. The LokPilot 5 DCC decoder delivers up to 1.5A of motor current. Enough juice even for older motors. Operational safety On request, a PowerPack can be fitted to the LokPilot 5 DCC to bridge dirty rail sections. Protection Of course, all function outputs and the motor output are protected against overload. We want you to enjoy your decoder for as long as possible. More Information Item # 59629  Brand ESU Scale HO & O WARNING: This product can expose you to a chemical, which is known to the State of California to cause Cancer and Reproductive Harm - For more information go to www.P65Warnings.ca.gov

Read more less

The LokSound by ESU Rectangular Speaker with Enclosure is ideal for use in HO, OO, S and small O Scale model locomotives. This speaker includes a built-in enclosure to enhance its output and is rated at 8 Ohms. At 15/16 x 2-5/32 x 11/32" 24 x 55 x 8.6mm, this rectangular speaker will easily fit inside your favorite locomotives.  More Information Item # 50344 Brand ESU Scale Multi WARNING: This product can expose you to a chemical, which is known to the State of California to cause Cancer and Reproductive Harm - For more information go to www.P65Warnings.ca.gov

Read more less

Enjoy complimentary shipping! Bundle your purchases for even more savings with our free shipping option. (This offer is optional) Providing enough steam to power train heat and some air conditioning systems on postwar trains taxed the standard water supply of EMD F7 A units set-up for passenger service, prompting EMD to rollout the new FP7 in 1949. Though outwardly similar to the F7A, FP7s were actually four feet longer to accommodate bigger water tanks with a capacity of 950 US gallons. Standard passenger power into the Amtrak era and beyond (with some also handling freight chores), these WalthersProto replicas are fully assembled and ready for service with: One time run of these roadnumbers, order now - limited quantity available! Matches the prototypes' extended frame and body Available with ESU LokSound 5 Sound & DCC for DCC and DC layouts Railroad-specific details Five-pole, skew-wound, high-torque, high-efficiency can motor Helical gears with 14:1 ratio for smooth, ultra-quiet running Easy multiple-unit operation Correct RP-25 wheels Proto MAX(TM) magnetic metal knuckle couplers Finished in the later gray and red scheme, these HO WalthersProto replicas feature: Nathan M-5 air horn Whip-type radio antenna with conduit SP-style snowplow pilot Upper headlight with twin sealed-beam (operating) and red emergency (UDE) lights (nonworking) Working rear back-up light Frame-mounted equipment box Rooftop photo-etched icicle breakers front and rear More Information Item # 920-49560 Brand WalthersProto Scale HO Engine Electronics DC, DCC Ready Type EMD Diesel Road Name Southern Pacific(TM) Road Number 6455 Estimated Release Date June 2024

Read more less

Enjoy complimentary shipping! Bundle your purchases for even more savings with our free shipping option. (This offer is optional) Great for railroads that preferred four-axle diesels for their passenger runs, prototypes for the WalthersProto EMD FP7 came equipped with more boiler water capacity on their stretched chassis. Providing enough steam to power train heat and some air conditioning systems on postwar trains taxed the standard water supply of standard EMD F7 A units set-up for passenger service, prompting EMD to roll out the new FP7 in 1949. Though outwardly similar to the F7A, FP7s were actually four feet longer to accommodate bigger water tanks with a capacity of 950 US gallons. Standard passenger power into the Amtrak era and beyond (with some also handling freight chores), these WalthersProto HO EMD FP7 replicas are fully assembled and ready for service with: One time run of these roadnumbers, order now - limited quantity available! Matches the prototypes' extended frame and body Available with ESU LokSound 5 Sound and DCC for DCC and DC layouts Railroad-specific details Five-pole, skew-wound, high-torque, high-efficiency can motor Helical gears with 14:1 ratio for smooth, ultra-quiet running Easy multiple-unit operation Correct RP-25 wheels Proto MAX(TM) magnetic metal knuckle couplers Finished in the later gray and red scheme, these HO WalthersProto replicas feature: Nathan M-5 air horn Whip-type radio antenna with conduit SP-style snowplow pilot Upper headlight with twin sealed-beam (operating) and red emergency (UDE) lights (nonworking) Working rear back-up light Frame-mounted equipment box Rooftop photo-etched icicle breakers front and rear The F7B features: Working back-up light on both endsLifting lugs on both endsPartial body skirt More Information Item # 920-42560 Brand WalthersProto Scale HO Engine Electronics DC, DCC & Sound Type EMD Diesel Road Name Southern Pacific(TM) Road Number 6453 Estimated Release Date June 2024

Read more less

Whether you're sending a letter or patiently waiting on a package, Letters, Parcels & Post is there for all of your mailing needs. Includes a rugged stone foundation, plenty of windows for showing off the printed interior and a light for highlighting the flag. A covered porch provides a place to wait when the lines are long and a set of stairs lead to a side door. Additional features include a chimney, rear loading dock and an unattached mailbox for dropping off mail at any time of day. This structure comes with pre-installed LED lighting made for use with the Just Plug® Lighting System. 20mA RoHS Compliant Colors may vary from actual product. More Information Item # BR4953 Brand Woodland Scenics Scale N Type Assembled Building Availability In-Stock/Restockable TCA Grading C-10 Mint - Brand New

Read more less

Modernize your HO freight operations in minutes with the WalthersMainline 68' Railgon Gondola! Introduced as a replacement for older 50' cars in the Railgon and many railroad fleets, this layout-ready model features: One time run of these road numbers, order now - limited quantity available! Prototypes in service from 2010 to the present with TTX and railroad owners Used to carry all types of finished steel products, scrap and similar bulk loads Authentic prototype details include: -See-through square load tie-downs along top chord -17-rib sidewalls -Straight sill Detailed brake gear 100-ton trucks with correct 36" turned metal RP-25 wheels Proto MAX(TM) metal knuckle couplers More Information Item # 910-6401 Brand WalthersMainline Scale HO Type 68' Railgon Gondola Road Name Burlington Northern Santa Fe Road Number 518501

Read more less

From the late 1940s to early 1980s, EMD's F7 was one of the most popular diesels ever built! Used in all types of freight and passenger service, these WalthersProto replicas come fully assembled and feature: One time run of these road numbers, order now - limited quantity available! Prototypes in freight and passenger service from 1949 to the 1980s LokSound 5 sound and DCC for DCC and DC layouts Road-specific details Powered A and B units Authentic "bulldog" nose Superb paint and lettering Five-pole, skew-wound, high-torque, high-efficiency can motor Helical gears with 14:1 ratio for smooth, ultra-quiet running LED constant headlight Easy multiple-unit operation Heavy die-cast metal underframe Correct size RP-25 metal wheels Proto MAX(TM) metal knuckle couplers For more information see the ESU Full Throttle Quick Start Guide available here.Based on units in service after delivery in the 1950s-1960s with: A-200-156 air horn Whip-style radio antenna Upper and lower (nose door) headlights Refitted SP-style snowplow pilot Horizontal air grilles More Information Item # 920-40936 Brand WalthersProto Scale HO Type EMD Diesel Road Name Southern Pacific(TM) Road Numbers 6301, 8301

Read more less

This detailed Atlas Master Gold N Scale GE Dash 8-40B locomotive is based on the 4,000-horsepower diesel-electrics used by a number of railroads. Built in 1988 and 1989, these units and their variant Dash 8-40BW wide-nose units were designed for handling tonnage at high speeds. In the 2020s several of these units still This N Scale GE Dash 8-40B replica features a scale-speed motor with dual flywheels, low-friction mechanism, directional golden-white LED lighting, a light board that's easily changed replaced with DCC decoder when you're ready, accurate decoration and AccuMate(R) magnetic knuckle couplers. It's also sound-ready and comes equipped with a factory-installed speaker for easy sound conversion. FEATURES: • Directional lighting • Painted safety rails • Blackened metal wheels • Factory-equipped with AccuMate® knuckle couplers • Golden-white LEDs • Standard cab or gull wing cab as appropriate!

Read more less

FEATURES: • Directional lighting • Painted safety rails • Blackened metal wheels • Factory-equipped with AccuMate® knuckle couplers • Golden-white LEDs • Standard cab or gull wing cab as appropriate!

Read more less

The Old Windmill was once vital to farm operations. Now it sets the scene for a forgotten rural area or abandoned farm. The blades of the metal turbine are rusted and broken, and the wooden tower is authentically weathered. Unattached details include two oblong stock tanks, a hand pump and a trough. See photos for footprint. Set contains 5 pieces. Colors may vary from actual product.

Read more less