$0.00 Pre-Order | Estimated delivery Summer 2023 Guaranteed Pre-Order Due Date: April 28, 2023 Chances are your new mini-van, light truck, SUV or crossover took it's first long trip by train aboard a Bi-Level Autorack like this WalthersProto replica! Introduced in the late 1970s as demand for pick ups and similar vehicles increased, these 89' 6" (27.2m) flatcars were fitted with racks with just two decks to provide more interior space for higher profile vehicles. A key part of Walthers Auto Series, these highly detailed and fully assembled HO models feature: One time run of these road numbers, order now - limited quantity available Prototypes introduced in 1970s and still going strong today Used to haul light trucks and similar vehicles Factory-installed grab irons, ladders and brake equipment Perfect car for Cornerstone(R) Auto Series kits, each sold separately Ultra-smooth rolling 33" RP-25 turned metal wheelsets Proto MAX(TM) metal knuckle couplers PLEASE NOTE: As WalthersProto Auto Racks are the correct prototype length, a minimum 24" radius is recommended for operation.

Read more less

$0.00 Pre-Order | Estimated delivery Summer 2023 Chances are your new mini-van, light truck, SUV or crossover took it's first long trip by train aboard a Bi-Level Autorack like this WalthersProto replica! Introduced in the late 1970s as demand for pick ups and similar vehicles increased, these 89' 6" (27.2m) flatcars were fitted with racks with just two decks to provide more interior space for higher profile vehicles. A key part of Walthers Auto Series, these highly detailed and fully assembled HO models feature: One time run of these road numbers, order now - limited quantity available Prototypes introduced in 1970s and still going strong today Used to haul light trucks and similar vehicles Factory-installed grab irons, ladders and brake equipment Perfect car for Cornerstone(R) Auto Series kits, each sold separately Ultra-smooth rolling 33" RP-25 turned metal wheelsets Proto MAX(TM) metal knuckle couplers PLEASE NOTE: As WalthersProto Auto Racks are the correct prototype length, a minimum 24" radius is recommended for operation.

Read more less

$0.00 Pre-Order | Estimated delivery Summer 2023 Chances are your new mini-van, light truck, SUV or crossover took it's first long trip by train aboard a Bi-Level Autorack like this WalthersProto replica! Introduced in the late 1970s as demand for pick ups and similar vehicles increased, these 89' 6" (27.2m) flatcars were fitted with racks with just two decks to provide more interior space for higher profile vehicles. A key part of Walthers Auto Series, these highly detailed and fully assembled HO models feature: One time run of these road numbers, order now - limited quantity available Prototypes introduced in 1970s and still going strong today Used to haul light trucks and similar vehicles Factory-installed grab irons, ladders and brake equipment Perfect car for Cornerstone(R) Auto Series kits, each sold separately Ultra-smooth rolling 33" RP-25 turned metal wheelsets Proto MAX(TM) metal knuckle couplers PLEASE NOTE: As WalthersProto Auto Racks are the correct prototype length, a minimum 24" radius is recommended for operation.

Read more less

$0.00 Pre-Order | Estimated delivery Summer 2023 Chances are your new mini-van, light truck, SUV or crossover took it's first long trip by train aboard a Bi-Level Autorack like this WalthersProto replica! Introduced in the late 1970s as demand for pick ups and similar vehicles increased, these 89' 6" (27.2m) flatcars were fitted with racks with just two decks to provide more interior space for higher profile vehicles. A key part of Walthers Auto Series, these highly detailed and fully assembled HO models feature: One time run of these road numbers, order now - limited quantity available Prototypes introduced in 1970s and still going strong today Used to haul light trucks and similar vehicles Factory-installed grab irons, ladders and brake equipment Perfect car for Cornerstone(R) Auto Series kits, each sold separately Ultra-smooth rolling 33" RP-25 turned metal wheelsets Proto MAX(TM) metal knuckle couplers PLEASE NOTE: As WalthersProto Auto Racks are the correct prototype length, a minimum 24" radius is recommended for operation.

Read more less

The WalthersTrainline Rooming House kit is a wood-frame house with a lean-to, front balcony and wood porch. Featuring a wood exterior and a shingle roof, this structure kit features plastic parts molded in appropriate colors so there's no painting needed. The Rooming House is quick and easy to build with complete, easy-to-follow illustrated instructions that are perfect for a first-time kit builder. This classic structure is a natural addition along your railroad.

Read more less

Iron Ridge Station is an easy-to-build WalthersTrainline kit typical of small-town wooden combination stations used across the continent. Featuring a traditional operator's bay window, freight loading docks and typical North American styling, it's a perfect for use with your train set or on a layout. This model kit features plastic parts molded in appropriate colors so there's no painting needed. The kit also includes colorful printed signs for easy-to-apply decoration. Easy-to-follow illustrated instructions make assembly fast and fun for first-time kit builders or seasoned modelers. Kit - 8-1/4 x 4-3/4 x 2-3/4" 20.9 x 12 x 6.9cm

Read more less

Adapter board, 18-pin Next-18 socket to NEM652 8-pin, Flex, 88mm, with heat shrink tube WARNING: This product can expose you to a chemical, which is known to the State of California to cause Cancer and Reproductive Harm - For more information go to www.P65Warnings.ca.gov

Read more less

The Bachmann HO Scale Pacific Flyer Train Set is an excellent entry into the hobby of model railroading. Decorated for the legendary Union Pacific, the 0-6-0 steam locomotive with operating headlight hauls its freight like a real trooper. Following just behind is a boxcar, a gondola and a cupola caboose, all with E-Z Mate(R) magnetic knuckle couplers. The train rides on a 36" circle of E-Z Track, including 11 pieces of curved track and a curved plug-in terminal rerailer. Cars feature Also includes a UL-listed power pack and an illustrated instruction manual.

Read more less

Revolutionize freight service with WalthersMainline SD60 diesels. Based on mid-production EMD units built with safety cabs fitted with a three-piece windshield and designated as SD60M for modified, these heavy-haulers are still going strong for many original owners and shortlines. Ready for service on your railroad, check out the many features including: Limited edition - one time run of these roadnumbers! Prototypes in service 1989 to the present in main line and regional service Mid-production safety cab with three-piece windshield Open grating on steps With ESU Sound & DCC for DCC & DC layouts featuring: 4 Function outputs with brightness control by CV Fully DCC Compatible 14, 28, 128 Speedsteps Dual Mode DC/DCC 4 Air Horns changeable by CVs 2 Bells Changeable by CVs Full 8 Notch Prime Mover Sounds Compressor Dynamic Brake Multiple realistic lighting effects 21-pin DCC plug Same powerful drive as WalthersProto(R) locos featuring: 5-pole skew-wound motor 14:1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Dual machined brass flywheels Heavy die-cast metal chassis Constant & directional LED headlights Updated shell with molded drill starter points for grab irons in EMD SD60M Diesel Detail Kit (#910-257) sold separately RP-25 metal wheels Proto MAX(TM) metal knuckle couplers PLEASE NOTE: When operating Walthers-branded DCC-equipped locomotives in DC mode, do not use power packs that exceed an 18V rating. This includes MRC 1300-series power packs which have known issues with our decoders. Alternate Horns and Bells include: Horns: CV163 = Nathan K3LA (default) CV163 = Nathan P3 CV163 = Leslie RS3L CV163 = Nathan K5LA CV163 = Nathan P5 Bells: CV164 = Steel Air Bell (default) CV164 = Graham White E-Bell Click here for additional information on DCC functions: ESU CV ListESU Function MappingESU Function Output

Read more less

Revolutionize freight service with WalthersMainline SD60 diesels. Based on mid-production EMD units built with safety cabs fitted with a three-piece windshield and designated as SD60M for modified, these heavy-haulers are still going strong for many original owners and shortlines. Ready for service on your railroad, check out the many features including: Limited edition - one time run of these roadnumbers! Prototypes in service 1989 to the present in main line and regional service Mid-production safety cab with three-piece windshield Open grating on steps With ESU Sound & DCC for DCC & DC layouts featuring: 4 Function outputs with brightness control by CV Fully DCC Compatible 14, 28, 128 Speedsteps Dual Mode DC/DCC 4 Air Horns changeable by CVs 2 Bells Changeable by CVs Full 8 Notch Prime Mover Sounds Compressor Dynamic Brake Multiple realistic lighting effects 21-pin DCC plug Same powerful drive as WalthersProto(R) locos featuring: 5-pole skew-wound motor 14:1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Dual machined brass flywheels Heavy die-cast metal chassis Constant & directional LED headlights Updated shell with molded drill starter points for grab irons in EMD SD60M Diesel Detail Kit (#910-257) sold separately RP-25 metal wheels Proto MAX(TM) metal knuckle couplers PLEASE NOTE: When operating Walthers-branded DCC-equipped locomotives in DC mode, do not use power packs that exceed an 18V rating. This includes MRC 1300-series power packs which have known issues with our decoders. Alternate Horns and Bells include: Horns: CV163 = Nathan K3LA (default) CV163 = Nathan P3 CV163 = Leslie RS3L CV163 = Nathan K5LA CV163 = Nathan P5 Bells: CV164 = Steel Air Bell (default) CV164 = Graham White E-Bell Click here for additional information on DCC functions: ESU CV ListESU Function MappingESU Function Output

Read more less

Revolutionize freight service with WalthersMainline SD60 diesels. Based on mid-production EMD units built with safety cabs fitted with a three-piece windshield and designated as SD60M for modified, these heavy-haulers are still going strong for many original owners and shortlines. Ready for service on your railroad, check out the many features including: Limited edition - one time run of these roadnumbers! Prototypes in service 1989 to the present in main line and regional service Mid-production safety cab with three-piece windshield Open grating on steps With ESU Sound & DCC for DCC & DC layouts featuring: 4 Function outputs with brightness control by CV Fully DCC Compatible 14, 28, 128 Speedsteps Dual Mode DC/DCC 4 Air Horns changeable by CVs 2 Bells Changeable by CVs Full 8 Notch Prime Mover Sounds Compressor Dynamic Brake Multiple realistic lighting effects 21-pin DCC plug Same powerful drive as WalthersProto(R) locos featuring: 5-pole skew-wound motor 14:1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Dual machined brass flywheels Heavy die-cast metal chassis Constant & directional LED headlights Updated shell with molded drill starter points for grab irons in EMD SD60M Diesel Detail Kit (#910-257) sold separately RP-25 metal wheels Proto MAX(TM) metal knuckle couplers PLEASE NOTE: When operating Walthers-branded DCC-equipped locomotives in DC mode, do not use power packs that exceed an 18V rating. This includes MRC 1300-series power packs which have known issues with our decoders. Alternate Horns and Bells include: Horns: CV163 = Nathan K3LA (default) CV163 = Nathan P3 CV163 = Leslie RS3L CV163 = Nathan K5LA CV163 = Nathan P5 Bells: CV164 = Steel Air Bell (default) CV164 = Graham White E-Bell Click here for additional information on DCC functions: ESU CV ListESU Function MappingESU Function Output

Read more less

Revolutionize freight service with WalthersMainline SD60 diesels. Based on mid-production EMD units built with safety cabs fitted with a three-piece windshield and designated as SD60M for modified, these heavy-haulers are still going strong for many original owners and shortlines. Ready for service on your railroad, check out the many features including: Limited edition - one time run of these roadnumbers! Prototypes in service 1989 to the present in main line & regional service First SD60M safety cab with three-piece windshield Open grating on steps 21-pin DCC plug Same powerful drive as WalthersProto(R) locos featuring: 5-pole skew-wound motor 14:1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Dual machined brass flywheels Heavy die-cast metal chassis Constant & directional LED headlights Updated shell with molded drill starter points for grab irons in EMD SD60M Diesel Detail Kit (#910-257) sold separately RP-25 metal wheels Proto MAX(TM) metal knuckle couplers

Read more less