HO Scale

Kato's line of ground level UNITRACK offers a variety of pieces and turnouts to allow you to build any layout your heart desires, all while ensuring track quality and steady delivery of electricity to your locomotives. Code 83 nickel silver rails Attached roadbed Compatible with DC (Analog) and DCC HO Scale 1 per package

Read more less

HO Scale Lasor Kit (Assembly Required) Coastal Brown Slate Shingles Item Number: 226 Building not include, these are just slate shingles.

Read more less

Show off your patriotism with Old Glory waving in the wind. US Flag - Wall Mounts are available in three sizes and work for multiple scales. They feature a United States flag hanging from a metal pole and a mounting bracket. Display your flag outside your home, church, small business, or on the buildings down Main Street. US Flags include a Just Plug Spotlight to highlight the Flag.

Read more less

#552 A.S.F.® Ride Control® 50 Ton Self Centering Trucks with 33" Smooth Back Wheels - HO ScaleMetal Fully Sprung Equalized Trucks Mounts with Kadee Self Centering bushing on a flat surface with a #2 or 2-56 screw or without the Kadee Self Centering bushing on a 0.140" or smaller molded on truck post secured with the original screw. The A.S.F.® A-3 Ride Control® 50-ton freight truck was introduced in the 1940's and is one of the forerunners of modern freight trucks. Features embodied into this design include a longer spring travel, no spring planks and constant friction control using friction castings in the bolster to dampen excessive lateral roll of the car. These design features allowed for a higher train speed with less danger of derailment than previous designs. ASF® sold over 140,000 sets by 1949. This truck is excellent for modeling the transition era up to 1994 when friction bearings were no longer allowed in interchange service. The Bettendorf Double Truss Truck was introduced in the 1930's by U.S. railroads and was allowed to be used in interchange service through 1993. The Kadee® #500, #502 & #550 represent 50- ton trucks for 100,000 pound cars. HO-Scale Metal Fully Sprung Trucks Features:  Self Centering Action - Trucks self align themselves parallel with the car for easier placement on track. Code 110 (.110) #520 33" Smooth Back Wheels #441 Brake Pads - Narrow Bolster Accurate Markings Incredible Detail True to Prototype Non-Magnetic Metal Wheels Highly Flexible Sprung Trucks Metal Sideframes & Fully Sprung Self Centering Bolster Smooth tracking Free Rolling Contoured Insulated Plastic Axles RP-25 Free Rolling Wheels #637 HO Scale Truck Springs Patent number 5,768,999 Package Includes: (2) Each #552 A.S.F.® Ride Control® 50 Ton Self Centering Trucks (assembled) (2) #441 Brake Pads - Narrow Bolster (2) Each Self Centering Bushing (2) Each #2 Screw The term Code 110 and Code 88 relates to the width of the wheels and has no relationship to track code. Code 110 wheels are .110" wide and Code 88 are .088" wide. Code 110 wheels are the common (or "Standard") width wheels and Code 88 are what is called "Semi-Scale" and are used when the modeler wants a more prototypical looking wheel width. Actual HO-Scale prototypical wheel width would be around .067" wide and although they will run OK on the average track they will not go through common turnouts and crossings. Code 88 (.088") is just about the minimum width of wheel that will run on most standard or common track if gauged correctly. It really is a matter of appearances because there's very little operational differences between running Code 110 or Code 88 wheels. Code 88 wheels look really good and are most noticeable on open frame cars like hoppers and tank cars. However, they also look great on boxcars, gondolas, and reefers but not quite as noticeable. As mentioned above track code and wheel code have no relationship meaning Code 110 and Code 88 will run on most any code of track. Track code is simply the measured height of the rail, code 100 is .100" tall, code 83 is .083" tall, code 70 is .070" tall, and so on.

Read more less

#504 A.S.F.® Ride Control® 50 Ton Trucks with 33" Smooth Back Wheels - HO ScaleMetal Fully Sprung Equalized Trucks Mounts with a #2 or 2-56 screw.Mounting Screws not Included. The A. S. F.® A-3 Ride Control® 50-ton freight truck was introduced in the 1940's and is one of the forerunners of modern freight trucks. Features embodied into this design include a longer spring travel, no spring planks and constant friction control using friction castings in the bolster to dampen excessive lateral roll of the car. These design features allowed for a higher train speed with less danger of derailment than previous designs. ASF® sold over 140,000 sets by 1949. This truck is excellent for modeling the transition era up to 1994 when friction bearings were no longer allowed in interchange service. HO-Scale Metal Fully Sprung Trucks Features: Code 110 (.110) #520 33" Smooth Back Wheels #441 Brake Pads - Narrow Bolster Accurate Markings Incredible Detail True to Prototype Non-Magnetic Metal Wheels Highly Flexible Sprung Trucks Metal Sideframes & Fully Sprung Bolster Smooth tracking Free Rolling Contoured Insulated Plastic Axles RP-25 Free Rolling Wheels #637 HO Scale Truck Springs  Patent numbers 5,832,837 & 5,768,999 Package Includes: (2) Each #504 A.S.F.® Ride Control® 50 Ton Trucks (assembled) (2) #441 Brake Pads - Narrow Bolster The term Code 110 and Code 88 relates to the width of the wheels and has no relationship to track code. Code 110 wheels are .110" wide and Code 88 are .088" wide. Code 110 wheels are the common (or "Standard") width wheels and Code 88 are what is called "Semi-Scale" and are used when the modeler wants a more prototypical looking wheel width. Actual HO-Scale prototypical wheel width would be around .067" wide and although they will run OK on the average track they will not go through common turnouts and crossings. Code 88 (.088") is just about the minimum width of wheel that will run on most standard or common track if gauged correctly. It really is a matter of appearances because there's very little operational differences between running Code 110 or Code 88 wheels. Code 88 wheels look really good and are most noticeable on open frame cars like hoppers and tank cars. However, they also look great on boxcars, gondolas, and reefers but not quite as noticeable. As mentioned above track code and wheel code have no relationship meaning Code 110 and Code 88 will run on most any code of track. Track code is simply the measured height of the rail, code 100 is .100" tall, code 83 is .083" tall, code 70 is .070" tall, and so on.

Read more less

#511 Bettendorf T-Section Trucks with 33" Ribbed Back Wheels - HO ScaleMetal Fully Sprung Equalized Trucks Mounts with a #2 or 2-56 screw.Mounting Screws not Included. The Bettendorf T-Section truck was introduced in the 1920's with a one piece cast sideframe. It had a life similar to the Andrews truck. HO-Scale Screws not included  Metal Fully Sprung Trucks Features: Code 110 (.110) #523 33" Ribbed Back Wheels Accurate Markings Incredible Detail True to Prototype Non-Magnetic Metal Wheels Highly Flexible Sprung Trucks Metal Sideframes & Fully Sprung Bolster Smooth tracking Free Rolling Contoured Insulated Plastic Axles RP-25 Free Rolling Wheels #637 HO Scale Truck Springs Patent number 5,768,999 Package Includes: (2) Each #511 Bettendorf T-Section Trucks (assembled) The term Code 110 and Code 88 relates to the width of the wheels and has no relationship to track code. Code 110 wheels are .110" wide and Code 88 are .088" wide. Code 110 wheels are the common (or "Standard") width wheels and Code 88 are what is called "Semi-Scale" and are used when the modeler wants a more prototypical looking wheel width. Actual HO-Scale prototypical wheel width would be around .067" wide and although they will run OK on the average track they will not go through common turnouts and crossings. Code 88 (.088") is just about the minimum width of wheel that will run on most standard or common track if gauged correctly. It really is a matter of appearances because there's very little operational differences between running Code 110 or Code 88 wheels. Code 88 wheels look really good and are most noticeable on open frame cars like hoppers and tank cars. However, they also look great on boxcars, gondolas, and reefers but not quite as noticeable. As mentioned above track code and wheel code have no relationship meaning Code 110 and Code 88 will run on most any code of track. Track code is simply the measured height of the rail, code 100 is .100" tall, code 83 is .083" tall, code 70 is .070" tall, and so on.

Read more less

#441 Brake Pads - Narrow Bolster - HO ScaleDetail Parts For use on Narrow Truck Bolseters.150" W x .090" H truck bolster.075" clip opening.400" pad to pad Can be used on all Kadee Metal Fully Sprung Trucks; except for Kadee® 70 & 100 Ton Metal Fully Sprung Trucks.(Not for use on #513, #518, #555, #558, #560, #566, #569, #570, #1560, #1566, #1569, #1570, all "HGC" 2 Piece Trucks). HO-Scale Package Includes: (4) Each #441 Brake Pads - Narrow Bolster

Read more less

This industry leading coupler features plastic standard coupler with metal knuckle, and #621 torsion centering spring and comes complete with #233 insulated draft gearbox and lid. The #33 Magne-Matic® Plastic Coupler is designed mostly for body mounting with limited space either above or below the mounting platform, with or without Draft Gear Box Lid and with Draft Gearbox Lid either on top or bottom. Note: The 30-Series Torsion Spring can be mounted either below or above the coupler shank, but must always be mounted between the Coupler Spring Lid and Draft Gearbox. The #143 Whisker® Metal Coupler mounted in a #252 Snap-together Gearbox is equivalent to the #33 Coupler. The Whisker® Coupler mounted in a #252 Snap-together Gear box makes for simple and easy assembly. Other Whisker® Coupler #33 equivalent options include #153 Whisker® "Scale" Metal Coupler when mounted a #252 Snap-together Gearbox. It is not recommended to use a metal coupler directly on a metal surface or in a metal draft gearbox to avoid possible electrical crossover and shorting that may cause damage.   Two pair per package   Made in the U.S.A. HO-Scale Package Includes: (2) Pair #33 Plastic Shank Couplers - Short Centerset Shank (2) Pair #621 Torsion Centering Spring (2) Pair #233 Gearboxes & Lids (2) Pair #210 Washers (2) Pair #256 - 2-56 Screws (2) #622 Knuckle Springs #33 Plastic Coupler Features: Material  -   Metal Knuckle, Plastic Coupler Shank Shank Length  -   Short (1/4") (center hole to back of coupler head) Coupler Offset  -   Centerset Knuckle Spring  -   #622 Centering System  -   Standard Shank Centering Spring  -   #621 Torsion Centering Spring Head  -   Standard Head Works With  -   #233 draft gearboxes #233 Plastic Draft Gearboxes & Lids Features: Material  -   Insulated Plastic Dimensions  -   3/8"L x 5/16"W x 9/64"H Works With  -   NO.5®, #58, 20-Series Couplers #33 in a #233 gearbox on top. Mounting Specifications: Mounting Height  -   1/2" Centerline  -   25/64" Trip Pin Height  -   1/32" Center Hole  -   2-56 Insulated Screws are the most commonly used. (Screw length will vary) #33 in a #233 gearbox on bottom. Mounting Specifications: Mounting Height  -   29/64" Centerline  -   25/64" Trip Pin Height  -   1/32" Center Hole  -   2-56 Insulated Screws are the most commonly used. (Screw length will vary)

Read more less

This high-tack, round, multi-sided adhesive yields instant placement on smooth and textured surfaces. It is repositionable and leaves no residue: perfect for positioning Support Panels, Modeling Sheets and Road Risers. Packaged in a convenient, pull-out dispenser. Each Spot has approximately 1/2" diameter. 100 pcs/package

Read more less

The Jingle Bell Express rushes last-minute wishes from the North Pole to homes around the world. Decked out in red and green and carrying a sweet cargo of holiday treats, the Jingle Bell Express will deliver merry dreams around your Christmas tree for years to come. View the video below to see the set in action. This ready-to-run train set includes: • 0-6-0 steam locomotive with operating headlight and coal tender• single-dome tank car• box car• quad hopper• offset cupola caboose• 47" x 38" oval of E-Z Track®, including 12 pieces of curved track, 1 piece of straight track, and 1 plug-in terminal rerailer• power pack and speed controller• illustrated instruction manual

Read more less

Use the HO Scale Transformer Connect Set to give the illusion of providing power from utility poles to structures. All powered structures need a power drop, and the Transformer Connect Set makes it easy to add this feature for further realism on your layout. This Set is designed to work with the Pre-Wired Poles. Kit includes: 2 Distribution Poles with Transformers and 24" (60.9 cm) of line attached 4 Service Masts 4 Electric Meters 1 Wire Threader Woodland Scenics Utility System - HO Scale Woodland Scenics 2268 | Substation Woodland Scenics 2266 | Pre-Wired Poles - Double Crossbar Woodland Scenics 2265 | Pre-Wired Poles - Single Crossbar Woodland Scenics 2267 | Transformer Connect Set

Read more less

Get an easy upgrade for your Bachmann Sound Value diesel models with our newest Tsunami2 decoder! The TSU-BH1 offers 8 LED-friendly function outputs so resistors are not required for LEDs! (See the wiring diagrams under product documentation for more information). Light effects are fully remappable and offer full access to our 20+ HyperLight effects.This decoder is available in 3 sound profiles EMD, GE, and ALCO. For an easy install, simply replace the Sound Value decoder and enjoy all of the Tsunami2 features you love!This decoder is designed to replace the factory board in the following Bachmann Sound Value Diesel Models: FA-2, FB-2, S-4, E7-A, SD70ACe, ES44AC, GP30, GP38-2, GP40, GP7, and SD40-2.Fun Tsunami2 features including: Reactive Dynamic Digital Exhaust, Functioning locomotive and train brakes, injectors, power reverse, and more. We also offer a large selection of selectable sound effects including: prime movers (up to 12), bells (12), airhorns (40+), couplers, and more!This decoder includes a connector to easily add a CurrentKeeper (P.N. 810140 or 810160) to maintain performance over dirty track and switches. Product Specifications: Sound Profile: EMD Diesel Dimensions: 97 x 16 x 7.7mm Max. Motor Stall Current: 2A Max. Function Current: 100mA (each output) Function Outputs: 8 LED-Friendly Outputs! Audio Amplifier: 2 Watt, 8-Ohm Load DCC Track Voltage: 7.5V – 22V Sound Channels: 16 Tsunami2 Digital Sound Decoders integrate a full-featured sound system, Hyperlight™ lighting effects, Hyperdrive2™ advanced motor control, and a DCC decoder into a single package. Tsunami2 Digital Sound Decoders offer 20+ lighting effects in each model! Other popular Tsunami2 features include: Reactive Dynamic Digital Exhaust, Functioning locomotive and train brakes. We also offer a large selection of selectable sound effects including: 8 manufacturer specific prime movers, bells (12), airhorns (40+), couplers, compressors, and more!

Read more less