Static King makes it easy to model large grassy areas and ensures Static Grass is applied vertically. The Static King has an ergonomic design and can be placed upside down for easy filling. It comes with different Sieve sizes for creating a varied effect using 2-12 mm lengths of Static Grass. A divider allows the use of multiple colors and sizes at the same time for modeling realistic fields and other tall grasses. The clear hopper ensures you always know how much Static Grass you have left. Built-in bleed-off function allows it to discharge safely on its own. Power is supplied via a Power Supply or battery.  Indicator light makes it easy to know if the Static King is turned on. Batteries and/or power supply not included.

Read more less

Static-Tac is specially formulated and has the right viscosity for adhering Static Grass and Briar Patch. It comes in a bottle with a graduated tip that works for large or small areas. Static-Tac is an easy-to-spread adhesive that dries to a clear matte finish for realistic results.

Read more less

The Model-Vac is the perfect strength for picking up loose landscaping material but still leaves glued items behind. This cordless modeling vacuum features an ergonomic design and can access small areas. The Model-Vac is easy to empty and does not cause damage to excess material so it can be used again. Batteries not included.

Read more less

Wax adhesive for holding miniatures in place whilst allowing re-positioning. Easily remove with warm water and soap. 28 grams

Read more less

Spray-Tac is a spray adhesive for adhering Flowers and Plant Hues. It sprays in a fine mist and dries to a clear, matte finish.

Read more less

Power your Walthers Cornerstone HO or N Scale Turntables (sold separately) quickly and easily with this plug-in wall unit featuring: Installs in minutes - instructions included Independent 800 ma 16VDC filtered power supply Includes adapter cord to connect to turntable Positive contact barrel-type connectors Intertek listed Made especially for use with Cornerstone HO 90' (933-2860), 110' (933-2851) and 130' (933-2859), and N Scale 130' (933-2618) Motorized Turntables, each sold separately - may also be used with earlier N Scale 130' 933-2616, HO 130' 933-2850 and HO 90' 933-2849 Turntables. PLEASE NOTE: Unit operates on 120V (standard North American house current) only.

Read more less

Tuft-Tac is a thick, high-tack adhesive. It holds its shape and is perfect for creating tufts of Static Grass or Field Grass. Tufts can be pre-made before being placed on a layout.

Read more less

Includes one each Plastic Compatible Gear Lubricant, Plastic Compatible Grease with PTFE and Plastic Compatible Motor Oil. For small HO engines, N and Z Scales. Comes with 7-1/2" extension needle adapter for those hard-to-reach places. Kit Includes:  #102 Micro-Gear Lube with PTFE #106 Micro Grease Lube with PTFE #108 Micro-Oil Lube Oil (Medium weight ISO 32)

Read more less

The Walthers Cornerstone Turntable Control Box allows you to expand operations of your HO or N Scale Cornerstone Motorized Turntable up to four remote locations. This add-on control box is designed for use with the turntables as noted above. It can be used on layouts running on DC or DCC train control and provides simple operation and programming with programmable indexing for up to 99 different tracks, one-touch 180-degree bridge rotation in either direction and a simplified LED display with adjustable brightness. Allows adding additional Motorized Turntable control points Use on DC or DCC layouts Two-digit LED display Measures: 3" 7.6cm Square Inside 3-5/8" 9.2cm Square Exterior Allow 1" 2.5cm clearance; additional space may be required for cables. For advanced control using DCC, Arduino and similar advanced controllers please refer to the Cornerstone Turntable Advanced Control Module.Please Note: This unit is designed for use only with the following Motorized Turntables, each sold separately: HO Scale 90' 933-2860 HO Scale 110' 933-2851 HO Scale 130' 933-2859 N Scale 130' 933-2618

Read more less

The Walthers Cornerstone HO Scale 90' Turntable is based on those used at small steam engine terminals. A vital part of train operations, this kit has ben carefully designed to fit most layouts and the 90' turntable has a one-piece pit for drop-in mounting. Once assembled, the bridge is manually position able. The kit includes the pit, gear drive, realistic decals and complete instructions. Complete hookup instructions cover wiring, adding track and more. The detailed bridge includes the operator's cab, handrails and a traditional arch (used to supply electrical power to the drive motors on the prototypes). This model can be motorized by adding Motorizing Kit 933-1050 (sold separately). The 90' Turntable is one of many Cornerstone HO Scale railroad buildings. Centerpiece for a small locomotive servicing area Manually position able Can be motorized by adding Motorizing Kit 933-1050 (sold separately) Molded in appropriate colors

Read more less

Keep Trains Running Reliably with Bright Boy Improve the conductivity of your tracks by keeping them clean with easy-to-use Walthers Bright Boy. This rubber-based abrasive is also great for taking grime off metal loco, freight or passenger car wheels too. Standard Grit

Read more less

Laser-Cut Kit Glue from Deluxe Materials is designed specifically for the rapid construction of wood and cardstock laser-cut kits. The carefully designed bottle has a twist lock cap with fine dispensing needle applicator which is easily removed for cleaning. The low-viscosity formula and needle applicator ensure easy application directly onto open or pre-assembled joints typically found in laser cut kits. Benefits of Laser-Cut Kit Glue include precision application, anti-clog applicator during use, easy clean-up with water, bonds plastics and painted wood; safe and odorless.  5/6oz 25mL

Read more less