Sure to be the focal point of any HO Scale engine terminal, this Walthers Cornerstone 130' Motorized Turntable is where steam locomotives, and later diesels, were turned around at the end of their runs. Normally serving a roundhouse, most were also placed for access to backshop facilities and servicing tracks. This 130' turntable was about as big as they come - large enough to turn a 4-8-8-4 Big Boy and other large, modern engines. On your layout use the 130' Motorized Turntable as the heart of your servicing facility alongside other Cornerstone railroad maintenance structures Typical of tables built from 1900s on - some still in service today 130' 39.6m length holds locos up to 18-7/8" 46.1cm long - big enough for a 4-8-8-4! Fits most engine terminals User-friendly, illustrated instructions simplify operation and programming Layout mounting templates for pit and Cornerstone Turntable Control Box Control Box included for use on layouts with DC or DCC train control New Cornerstone Turntable Control Box for simple operation and programming with: Programmable indexing for up to 99 different tracks One-touch 180-degree bridge rotation in either direction Simplified LED display with adjustable brightness Operable from up to four remote locations with additional Control Boxes (933-2320 each sold separately) Comes complete with motor and Control Box, operates on 12-18v AC, 16-24v DC power supply (power supply not included) Comes with Code 83 rail installed on bridge Requires 18-1/4" 45.6cm mounting hole, 19-1/8" 47.8cm overall diameter Optional: To control turntable operation with DCC throttle or serial UART controller, purchase Cornerstone Advanced Control Module (933-2321, available separately)

Read more less

The Walthers Cornerstone Turntable Advanced Control Module makes it possible to operate your Motorized Turntable using DCC, serial UART, keypad or switch contacts. For DCC applications this circuit will function as a stationary decoder with no CV or programming required. The Turntable Advanced Control Module includes the circuit, Connection cable and complete instructions. Adds DCC, serial UART, keypad and switch contact input modes including: DCC control using stationary decoder protocols Numeric Keypad Button per track Rotary selector switch Control box emulation Serial Rx/Tx UART port   Digital outputs for remote dual digit display and controlling track power relays to selectively power service tracks automatically Measures: 2-3/4" (70mm) x 4-3/16" (107mm) Please Note: This unit is designed for use only with the following Motorized Turntables, each sold separately:   HO Scale 90' 933-2860 HO Scale 110' 933-2851 HO Scale 130' 933-2859 N Scale 130' 933-2618

Read more less

The Deluxe Materials BD27 Scenic Rust Kit is a perfect choice for modellers and hobbyists. Get the most out of your model railway with the versatile multi-scale kit that includes a selection of realistic rust weathering powders and simulated rust streaking fluid. Achieve a realistic finish in 1/76, 1/48, 1/32 and 1/24 scales with the confidence of professional-level results. 7.6oz 225ml

Read more less

Use the Easy Rock Carving Tools with Carving Plaster to carve custom rock formations. The Strata Tool helps you carve and shape large areas fast to model strata, blasted rock and other weathered and eroded outcrops. The Carving Tool has two sides - a Chisel and a Pick. Use the Chisel to carve gouges and cavities. Use the Pick to carve grooves, fine-line abrasions and striation markings. Keep your carving area free from debris with the Duster. 3 piece set Specially formulated to work with Terrain and Landscape products, these tools and adhesives are designed to simplify your modeling efforts. They are fully tested for results, safety, quality and durability.

Read more less

Easily create realistic fields and tall grasses with the Static Grass Shaker Kit. This kit allows you to easily add dimension and variation to your miniature base and gaming board. Great for small projects or specific areas on a terrain feature. More Information Item # 6595 Brand All Game Terrain Scale All Scales MSRP $16.99 About Tools Use Tools to easily apply terrain on your desired look onto your miniature base or gaming board. Use landscape tools for your miniature wargaming or tabletop roleplaying game.

Read more less

Game-Tac™ goes on white and dries to a clear matte finish. It is a strong-hold adhesive perfect for instant placement of Brambles, Dead Fall, Stone and other landscaping materials. Game-Tac is water soluble and non-toxic. 4 fl oz (118 mL) More Information Item # 6409 Brand All Game Terrain Scale All Scales MSRP 5.99 About Gamer Glues Gamer Glues are specially formulated for adhering landscaping to your tabletop terrain feature, miniature base or gaming board. They are water soluble and non-toxic. Lock in your landscape materials for your miniature wargaming or tabletop roleplaying game with All Game Terrain adhesives.

Read more less

Magic-Tac™ is a high-tac adhesive. It is thick and full bodied, yet flexible. It is great for Tall Grass, Static Grass, and making custom tufts for your terrain feature, miniature base or gaming board. Magic-Tac is water soluble and non-toxic. 4 fl oz (118 mL) More Information Item # 6408 Brand All Game Terrain Scale All Scales MSRP 9.99 About Gamer Glues Gamer Glues are specially formulated for adhering landscaping to your tabletop terrain feature, miniature base or gaming board. They are water soluble and non-toxic. Lock in your landscape materials for your miniature wargaming or tabletop roleplaying game with All Game Terrain adhesives.

Read more less

Shakers are specially designed with smaller-sized holes for a closer application on your miniature base, terrain feature or gaming board. Use Shakers for Flowers and finer Ground Cover like Base Layer. The cap has multiple opening sizes for different application amounts. 2 PC (1.5 oz ea) More Information Item # 6400 Brand All Game Terrain Scale All Scales MSRP 5.99 About Tools Use Tools to easily apply terrain on your desired look onto your miniature base or gaming board. Use landscape tools for your miniature wargaming or tabletop roleplaying game.

Read more less

SwitchPilot 3 decoders are optimized for stationary use on your system and can switch conventional double coil switch drives, light signals, magnetic uncouplers, light bulbs or other stationary consumption.In order to facilitate the rather cumbersome configuration of magnetic article decoders, the SwitchPilot 3 has an innovative operating concept consisting of a 4-line, illuminated OLED display and three input buttons. Modes The SwitchPilot 3 is multi-protocol and can be used with workstations according to the Märklin® Motorola® system (e.g. 6021, Central Station® or Mobile Station®) as well as DCC-enabled control panels. The configuration can take place on both the main track and the programming track. Thanks to RailCom®, CVs can also be read out. Functioning The SwitchPilot 3 can be supplied directly from the digital system or from an external DC or change voltage source. It has a total of 8 transistor outputs, which are grouped in the 4 exit pairs 1 to 4. Each output pair contains two outputs (OutA and OutB) and can be configured individually for the desired use case:In pulse mode, the output is switched on as soon as a switching command is received. The fact that the output automatically switches off again as soon as the time stored in the decoder has elapsed prevents the burning of magnetic article drives.At the moment (K83-compatible) the output remains active as long as the button on the control panel is pressed. This operating mode is suitable for turnout drives with final shutdown or for de-caps.In bi-stable continuous operation (k84-compatible), the two outputs are switched on and off: When pressing the first button (red) on the control panel, the output Out A is switched on. It remains active until pressing the assigned button (green) activates the output Out B of the same output group. Out A and Out B behave like a change switch.In alternating flasher mode, the outputs Out A and Out B of an output pair are switched on alternately with an adjustable flashing frequency. The change indicator is started with the command "Ge- rade/Green" of the assigned button and stopped again with the command "Branching/Red".Optionally, the output can also be slowly dimmed and dimmed (so-called "zoom" for glow lam pen simulation).With the switch 3 mode switch, you can switch all output pairs together to the "k83" or "k84" modes at lightning speed, regardless of how they are configured. Feedback Since the SwitchPilot 3 is RailCom®-capable, all settings can be read out and changed directly in the built-in state on request. In combination with an ECoS as an ideal "partner", the SwitchPilot 3 can record and display the actual turnout setting with appropriately prepared turnout drives. Finally, you have the certainty that your switch has switched correctly! Set The SwitchPilot 3 can be flexibly adjusted either on the programming track with DCC control panels or on the main track with POM ("Programming on Main") or can also be read out via RailCom® CVs. On request, he also learns the addresses directly via a programming button. The easiest way to set is, of course, with the integrated OLED display and the three input buttons: All (!) Settings can be checked directly on the decoder and changed on request. A"Programming" with the help of your control panel is not required. It really can't be any easier. The ESU LokProgrammer can be used for firmware updates. Protection As with our locomotive decoders, the outputs of the SwitchPilot 3 are largely protected against overload. We want you to enjoy your decoder for as long as possible. More Information Item # 51840 Brand ESU Scale Multi WARNING: This product can expose you to a chemical, which is known to the State of California to cause Cancer and Reproductive Harm - For more information go to www.P65Warnings.ca.gov

Read more less

Sure to be the focal point of any HO Scale engine terminal, this Walthers Cornerstone 110' Motorized Turntable is where steam locomotives, and later diesels, were turned around at the end of their runs. Normally serving a roundhouse, turntables were placed adjoining the roundhouse, servicing tracks and at major terminals, backshops. This 110' turntable is large enough to turn larger locomotives such as a 4-8-4 Northerns and 2-10-2s. It'll look great at your locomotive terminal, at junctions and anywhere else medium-sized steam locomotives must be turned. On your layout use the 110' Motorized Turntable as the heart of your servicing facility alongside other Cornerstone railroad maintenance structures 110' 33.5m length typical of bigger tables built from 1900s on - some still in service today Must-have detail for engine terminals Holds locos up to 15-1/4" 38.7cm long Layout mounting templates for pit and Cornerstone Turntable Control Box User-friendly, illustrated instructions simplify assembly Requires 15-9/16" 39.5cm mounting hole to be cut in layout for installation 16-7/16" 41.7cm overall diameter Control Box included for use on layouts with DC or DCC train control New Cornerstone Turntable Control Box for simple operation and programming with: Programmable indexing for up to 99 different tracks One-touch 180-degree bridge rotation in either direction Simplified LED display with adjustable brightness Operable from up to four remote locations with additional Control Boxes (933-2320 each sold separately) Optional: To control turntable operation with DCC throttle or serial UART controller, purchase Cornerstone Advanced Control Module (933-2321, available separately) Comes complete with motor and Control Box, operates on 12-18v AC, 16-24v DC power supply (power supply not included) Comes with Code 83 rail installed on bridge

Read more less

Animate your models in minutes with the Walthers Cornerstone Motorizing Kit. This fully assembled drive unit is a drop-in mount for Walthers Double Track Swing Bridge (933-3088), 90' Turntable Kit (933-3171) and the Walking Beam Oil Pumps in HO (933-3170) or N Scale (933-3248), all sold separately. The Motorizing Kit can easily be adapted to other models. It's complete with a rugged DC motor and has 360:1 gearing to insure smooth, slow speeds. PLEASE NOTE: This unit is for use with DC power only; maximum 12V, .25 amps. Use with Cornerstone structures that accept motorizing 360:1 gear ratio Works on standard DC

Read more less

Labelle Industries No. 107 Plastic Compatible Motor Oil 2019 formula is a medium-weight lubricant for HO and larger scale models with high-torque motors. With its temperature range of -45F to +450F it's more than suitable for model trains as well as other radio-control vehicles and drone shafts. It is also USDA Food Grade and Kosher certified and contains no chemicals that require Proposition 65 notices in California. Other uses of No. 107 Plastic Compatible Motor Oil include Other uses: fractional horsepower motors, tiny bearings, computer fans, computer printed bearings, sewing machines, large fishing reel mechanisms, drawer slides, door and window locks, precision instruments, large clock mechanisms and small locks of all sizes.

Read more less