Tools & Adhesives
Kadee Kadee 240 | Double Headed Double Ended Pin Vise
Pin Vise Double headed pin vis Metal double headed/ended pin vise with double reversible collets at each end. Collets have four different size openings. Package Includes: (1) Mark V Gripper metal 5-prong jaw
£5.18
Kadee Kadee 169 | Rectifier Kit
Rectifier Kit Converts AC or DC track current to polarized DC current suitable for LED lighting and other electronic devices that require DC current. Includes: 1 Rectifier 1A 400V, 1 Capacitor 47UF 35V, 1 Fuse Holder 2AG Block 300V, 1 Fuse 250mA 250V 2AG 1 Each Kadee HO Pickup Truck Trouble Shooting Important!One side of each bronze electrical pickup is marked with a red dot. This red dot indicates the side that picks up the current from the track. When installing the Pickup Trucks on your rolling stock These marks MUST be on opposite rails otherwise an electrical short will occur and the Pickup Trucks may be damaged! Problems: Possible Cause: Possible Solution: Flickering Lights Dirty Track & Wheels Clean Track & Wheels Poor connection in wiring Check all wiring connections Insufficient connection betweenbronze pickups and axles Check that bronze pickup fingersare touching axle Capacitor needed A capacitor may be needed tostabilize voltage. (see Kadee HOPickup Truck Wiring Diagram) Derailments Uneven pickup tension on axles Check that all bronze pickupshave equal tension against axle Crooked or kinked pickup wire Check that pickup wire is notbinding where it protrudesthrough the floor of the car
£4.55£1.60
Woodland Scenics Woodland Scenics 639 | Static King Static Grass Applicator - Field System | Multi Scale
Static King makes it easy to model large grassy areas and ensures Static Grass is applied vertically. The Static King has an ergonomic design and can be placed upside down for easy filling. It comes with different Sieve sizes for creating a varied effect using 2-12 mm lengths of Static Grass. A divider allows the use of multiple colors and sizes at the same time for modeling realistic fields and other tall grasses. The clear hopper ensures you always know how much Static Grass you have left. Built-in bleed-off function allows it to discharge safely on its own. Power is supplied via a Power Supply or battery. Indicator light makes it easy to know if the Static King is turned on. Batteries and/or power supply not included, available as Add-On.
£53.92 - £67.76
Woodland Scenics Woodland Scenics 640 | Model-Vac | Multi Scale
The Model-Vac is the perfect strength for picking up loose landscaping material but still leaves glued items behind. This cordless modeling vacuum features an ergonomic design and can access small areas. The Model-Vac is easy to empty and does not cause damage to excess material so it can be used again. Batteries not included.
£15.96
Deluxe Materials Deluxe Materials AD29 | Tacky Wax | Multi Scale
Wax adhesive for holding miniatures in place whilst allowing re-positioning. Easily remove with warm water and soap. 28 grams
£5.42£4.88
Woodland Scenics Woodland Scenics 645 | Spray-Tac™
Spray-Tac is a spray adhesive for adhering Flowers and Plant Hues. It sprays in a fine mist and dries to a clear, matte finish.
£5.39
Woodland Scenics Woodland Scenics 195 | Hob-e-Tac® Adhesive
Hob-e-Tac is a multi-purpose, water-soluble, high-tack adhesive. It is perfect for attaching Clump-Foliage™ to tree armatures. Also, use to glue Field Grass and Fine-Leaf Foliage™ to layout. 2 fl oz (59.1 mL)
£4.95
Bachmann Bachmann 39013 | Hand-Held Track Cleaner ON30/HO/ N SCALES
Handy tool for your model railroad. Multi Scale. Use with E-Z Lube® Rail & Road Track Cleaner for great results.
£9.57£5.74
Labelle Labelle 106 | Plastic Compatible Grease w/PTFE - 1/2oz 14.8mL | Multi Scale
Labelle grease with PTFE**Just a “dab” will work wonders, put a “dab” on the exposed gear box and run a minute or so, then add another “dab” and it will work its way throughout the gear box and worm gear. Additional Suggested Uses: –Model Trains: Exposed or Enclosed Gear Boxes (all scales) –RC Models. Exposed or Enclosed gear boxes on all RC models of all sizes and type. –Shock Absorbers –Slot Cars: Exposed or Enclosed gear boxes on Slot Cars of all Sizes –Bicycles: Enclosed cable rub points, gears. –Fishing Reel mechanisms –Other uses: Enclosed gear boxes on all sorts of Household items, squeaky door hinges, Riding toys, mechanical toys of all types. **PTFE has been called “the slickest substance known to man” is the parent chemical of “Teflon” which is registered trademark of Dupont Chemicals.
£7.39
Walthers Cornerstone Walthers Cornerstone 933-2859 | Motorized 130' Turntable DC/DCC - Assembled - 19-1/8" 47.8cm Overall Diameter | HO Scale
Sure to be the focal point of any HO Scale engine terminal, this Walthers Cornerstone 130' Motorized Turntable is where steam locomotives, and later diesels, were turned around at the end of their runs. Normally serving a roundhouse, most were also placed for access to backshop facilities and servicing tracks. This 130' turntable was about as big as they come - large enough to turn a 4-8-8-4 Big Boy and other large, modern engines. On your layout use the 130' Motorized Turntable as the heart of your servicing facility alongside other Cornerstone railroad maintenance structures Typical of tables built from 1900s on - some still in service today 130' 39.6m length holds locos up to 18-7/8" 46.1cm long - big enough for a 4-8-8-4! Fits most engine terminals User-friendly, illustrated instructions simplify operation and programming Layout mounting templates for pit and Cornerstone Turntable Control Box Control Box included for use on layouts with DC or DCC train control New Cornerstone Turntable Control Box for simple operation and programming with: Programmable indexing for up to 99 different tracks One-touch 180-degree bridge rotation in either direction Simplified LED display with adjustable brightness Operable from up to four remote locations with additional Control Boxes (933-2320 each sold separately) Comes complete with motor and Control Box, operates on 12-18v AC, 16-24v DC power supply (power supply not included) Comes with Code 83 rail installed on bridge Requires 18-1/4" 45.6cm mounting hole, 19-1/8" 47.8cm overall diameter Optional: To control turntable operation with DCC throttle or serial UART controller, purchase Cornerstone Advanced Control Module (933-2321, available separately)
£223.69
Walthers Cornerstone Walthers Cornerstone 933-2860 | Motorized 90' Turntable - Assembled - 13-3/4" 34.9cm Overall Diameter | HO Scale
Sure to be the focal point of any HO Scale engine terminal, this Walthers Cornerstone 90' Motorized Turntable is where steam locomotives, and later diesels, were turned around at the end of their runs. Normally serving a roundhouse, most smaller turntables were placed adjoining the roundhouse and servicing tracks. This 90' turntable is large enough to turn typical locomotives as large as a 2-8-2 Mikado or 4-6-2 Pacific. It'll look great at smaller terminals, at junctions and anywhere else steam locomotives must be turned. On your layout use the 90' Motorized Turntable as the heart of your servicing facility alongside other Cornerstone railroad maintenance structures Typical of tables built from 1900s on - some still in service today Fits most engine terminals Holds locos up to 12-3/8" 31.4cm long User-friendly, illustrated instructions simplify operation and programming Layout mounting templates for pit and Cornerstone Turntable Control Box Control Box included for use on layouts with DC or DCC train control New Cornerstone Turntable Control Box for simple operation and programming with: Programmable indexing for up to 99 different tracks One-touch 180-degree bridge rotation in either direction Simplified LED display with adjustable brightness Operable from up to four remote locations with additional Control Boxes (933-2320 each sold separately) Comes complete with motor and Control Box, operates on 12-18v AC, 16-24v DC power supply (power supply not included) Comes with Code 83 rail installed on bridge Optional: To control turntable operation with DCC throttle or serial UART controller, purchase Cornerstone Advanced Control Module (933-2321, available separately) Requires 12-3/4" 32.3cm mounting hole 13-3/4" 34.9cm overall diameter
£223.69£212.50
Walthers Cornerstone Walthers Cornerstone 933-2320 | Cornerstone Turntable Control Box - For 933-2851, 2859, 2860 and 2618 Turntables Only (Each Sold Separately) | Multi Scale
The Walthers Cornerstone Turntable Control Box allows you to expand operations of your HO or N Scale Cornerstone Motorized Turntable up to four remote locations. This add-on control box is designed for use with the turntables as noted above. It can be used on layouts running on DC or DCC train control and provides simple operation and programming with programmable indexing for up to 99 different tracks, one-touch 180-degree bridge rotation in either direction and a simplified LED display with adjustable brightness. Allows adding additional Motorized Turntable control points Use on DC or DCC layouts Two-digit LED display Measures: 3" 7.6cm Square Inside 3-5/8" 9.2cm Square Exterior Allow 1" 2.5cm clearance; additional space may be required for cables. For advanced control using DCC, Arduino and similar advanced controllers please refer to the Cornerstone Turntable Advanced Control Module.Please Note: This unit is designed for use only with the following Motorized Turntables, each sold separately: HO Scale 90' 933-2860 HO Scale 110' 933-2851 HO Scale 130' 933-2859 N Scale 130' 933-2618
£31.12
