Labelle Industries No. 107 Plastic Compatible Motor Oil 2019 formula is a medium-weight lubricant for HO and larger scale models with high-torque motors. With its temperature range of -45F to +450F it's more than suitable for model trains as well as other radio-control vehicles and drone shafts. It is also USDA Food Grade and Kosher certified and contains no chemicals that require Proposition 65 notices in California. Other uses of No. 107 Plastic Compatible Motor Oil include Other uses: fractional horsepower motors, tiny bearings, computer fans, computer printed bearings, sewing machines, large fishing reel mechanisms, drawer slides, door and window locks, precision instruments, large clock mechanisms and small locks of all sizes.

Read more less

Debonds and dissolves superglue; use to release bonded skin and superglue stains. Stays on site for fast debonding action. CA Glue Debonder/Dissolver

Read more less

Support Panels are made of extruded foam and designed to use as a strong but lightweight terrain understructure. They are quick and easy to use. Cut easily with Hot Wire Foam Cutter, Foam Knife, scissors or hobby knife. Cover with No-News Paper™ and Plaster Cloth. Just the right width to use with Road Riser™ to make an elevated road base. 2/pkg 1/16" d x 18" w x 24" l (1.59 mm x 45.7 cm x 61 cm)

Read more less

This high-tack, round, multi-sided adhesive yields instant placement on smooth and textured surfaces. It is repositionable and leaves no residue: perfect for positioning Support Panels, Modeling Sheets and Road Risers. Packaged in a convenient, pull-out dispenser. Each Spot has approximately 1/2" diameter. 100 pcs/package

Read more less

1 roll/pkg 8" w x 5 yd l, 10 ft2 (20.3 cm x 4.57 m x 92.9 dm2)

Read more less

Pin Vise Double headed pin vis Metal double headed/ended pin vise with double reversible collets at each end. Collets have four different size openings. Package Includes: (1) Mark V Gripper metal 5-prong jaw

Read more less

SwitchPilot 3 Plus decoders are optimized for stationary use on your system and can switch conventional double coil switch drives, light signals, magnetic uncouplers, light bulbs or other stationary consumption. In order to facilitate the rather cumbersome configuration of magnetic article decoders, the SwitchPilot 3 Plus has an innovative operating concept consisting of a 4-line, illuminated OLED display and three input buttons. Modes The SwitchPilot 3 Plus is multi-protocol and can be used with control panels according to the Märklin® Motorola® system (e.g. 6021, Central Station® or Mobile Station®) as well as DCC-enabled control panels. The configuration can take place on both the main track and the programming track. Thanks to RailCom®, CVs can also be read out. Functioning The SwitchPilot 3 Plus can be supplied directly from the digital system or from an external DC or change voltage source. It has a total of 16 transistor outputs, which are grouped in the 8 exit pairs 1 to 8. Each output pair contains two outputs (OutA and OutB) and can be configured individually for the desired use case: In pulse mode, the output is switched on as soon as a switching command is received. Since the output automatically switches off again as soon as a time stored in the decoder has been reached, a burn-through of magnetic articles is prevented. At the moment (K83-compatible) the output remains active as long as the button on the control panel is pressed. This operating mode is suitable for turnout drives with final shutdown or for de-caps. In bi-stable continuous operation (k84-compatible), the two outputs are switched on and off: When pressing the first button (red) on the control panel, the output Out A is switched on. It remains active until pressing the assigned button (green) activates the output Out B of the same output group. Out A and Out B behave like a change switch.In alternating flasher mode, the outputs Out A and Out B of an output pair are switched on alternately with an adjustable flashing frequency. The change indicator is started with the command "Gerade/Green" of the assigned button and stopped again with the command "Branching/Red".Optionally, the output can also be slowly dimmed and dimmed (so-called "zoom" for incandescent lamp simulation). Set The SwitchPilot 3 Plus can be flexibly adjusted either on the programming track with DCC control panels or on the main track with POM ("Programming on Main") or can also be read out via RailCom® CVs. On request, he also learns the addresses directly via a programming button. The setting is, of course, the simplest with the integrated OLED displays as well as the three input buttons: All (!) Settings can be checked directly on the decoder and changed on request. "Programming" with the help of your headquarters is not required. It really can't be any easier. The ESU LokProgrammer can be used for firmware updates. Protection As with our locomotive decoders, the outputs of the SwitchPilot 3 Plus are protected against overload. We want you to enjoy your decoder for as long as possible. More Information Item # 51831 Brand ESU Scale Multi WARNING: This product can expose you to a chemical, which is known to the State of California to cause Cancer and Reproductive Harm - For more information go to www.P65Warnings.ca.gov

Read more less

Labelle DCC / DC Track Conditioner If operating in either “DC” or “DCC” mode, and your locomotives have “headlight flicker” or your Decoders are cutting in and out, it is a sure sign your track needs cleaning with this Product. Just clean your track with this product and leave a micro-coating on the rails of LaBelle #105 and it will dramatically improve your DC/ DCC reliability. (We have done testing on private layouts with this new product and everyone who has used it, has been impressed by the improvement in Locomotive control.

Read more less

Labelle grease with PTFE**Just a “dab” will work wonders, put a “dab” on the exposed gear box and run a minute or so, then add another “dab” and it will work its way throughout the gear box and worm gear. Additional Suggested Uses: –Model Trains: Exposed or Enclosed Gear Boxes (all scales) –RC Models. Exposed or Enclosed gear boxes on all RC models of all sizes and type. –Shock Absorbers –Slot Cars: Exposed or Enclosed gear boxes on Slot Cars of all Sizes –Bicycles: Enclosed cable rub points, gears. –Fishing Reel mechanisms –Other uses: Enclosed gear boxes on all sorts of Household items, squeaky door hinges, Riding toys, mechanical toys of all types. **PTFE has been called “the slickest substance known to man” is the parent chemical of “Teflon” which is registered trademark of Dupont Chemicals.

Read more less

LaBelle #102 is an extremely versatile gear lubricant and has an unlimited number of heavy duty uses for home, office, or laboratory, such as — –Model Trains: Exposed Gear Boxes (all scales) –RC Models. Exposed gear boxes on all RC models of all sizes and type. Shock Absorbers –Slot Cars: Exposed gear boxes on Slot Cars of all Sizes –Bicycles: Exposed cable rub points, gears. –Fishing Reel mechanisms –Other uses: Exposed gear boxes on all sorts of Household items, squeaky door hinges, Riding toys, musical instrument keys, mechanical toys of all types. **PTFE has been called “the slickest substance known to man” is the parent chemical of “Teflon” which is registered trademark of Dupont Chemicals.

Read more less

Sure to be the focal point of any HO Scale engine terminal, this Walthers Cornerstone 90' Motorized Turntable is where steam locomotives, and later diesels, were turned around at the end of their runs. Normally serving a roundhouse, most smaller turntables were placed adjoining the roundhouse and servicing tracks. This 90' turntable is large enough to turn typical locomotives as large as a 2-8-2 Mikado or 4-6-2 Pacific. It'll look great at smaller terminals, at junctions and anywhere else steam locomotives must be turned. On your layout use the 90' Motorized Turntable as the heart of your servicing facility alongside other Cornerstone railroad maintenance structures Typical of tables built from 1900s on - some still in service today Fits most engine terminals Holds locos up to 12-3/8" 31.4cm long User-friendly, illustrated instructions simplify operation and programming Layout mounting templates for pit and Cornerstone Turntable Control Box Control Box included for use on layouts with DC or DCC train control New Cornerstone Turntable Control Box for simple operation and programming with: Programmable indexing for up to 99 different tracks One-touch 180-degree bridge rotation in either direction Simplified LED display with adjustable brightness Operable from up to four remote locations with additional Control Boxes (933-2320 each sold separately) Comes complete with motor and Control Box, operates on 12-18v AC, 16-24v DC power supply (power supply not included) Comes with Code 83 rail installed on bridge Optional: To control turntable operation with DCC throttle or serial UART controller, purchase Cornerstone Advanced Control Module (933-2321, available separately) Requires 12-3/4" 32.3cm mounting hole 13-3/4" 34.9cm overall diameter

Read more less

Very fast, cement for all types of plastic kits. Clog-resistant formula and fine tip bottle make for ease of use. Bonds: styrene, clear plastic, and even wood to plastic. .7oz 20mL

Read more less