Brand: JT's Mega Steam Scent: Oil-Fired Steam Size: 2 Oz Glass Bottle with Eye Dropper Made in the USA

Read more less

#309 Under-the-Ties Delayed-Action Electric Uncoupler Kit - HO Scale Kadee® #165 Red - Normally Open momentary contact push button switches are recommend. Fits any HO code track. This package contained one HO Scale Magne-Electric electromagnetic, delayed action uncoupler kit, ready to assemble and install Under-the-Ties. It can be installed on any straight layout track, but especially on mainlines, were false uncoupling my occur. Fits any HO code track. Operates: 16 volt DC. We recommend a 16 volt DC power source (at least 3 Amps) or 18 volt AC power source (at least 3 Amps)converted to DC with bridge rectifier. WARNING: Do not use the uncoupler continually. DO NOT activate the uncoupler for longer than 2 MINUTES at one time.This will avoid possible overheating which will damage the uncoupler. (Track Not Included) Package Includes: (1) Each Coil (1) Each Steel core (4) Each Field plates (1) Each Field plate divider (1) Each Upper track mounting plate (1) Each 10-32 x 7/8" Bolt (1) Each 10-32 Nut (3) Each 2 x 3/8" flat head self-tapping screws (4) Each 0-48 x 1/4" screws (4) Each 0-48 x 3/8" screws (1) Each Bridge Rectifier (1) Each Capacitor Recommended Accessories: 3 Amp Push button momentary switch SPST - Normally Open (Kadee #165) Light bulb - 14-20 Volts, .2 Amp #20 AWG Wire- insulated, strand in two color codes Rosin Core Solder - 1/16" size Track Section, 3 1/2" long Roadbed Section, 2 1/8" long Metal Rail Joiners Ballast   Recommended Tools: Power or Crank Drill - with 1/4" bit 1/4" Drill #52 Drill (Kadee #780 Tap & Drill set) #55 Drill (Kadee #780 Tap & Drill set) Reg. Screwdriver - with 1/8" head Modeler's Knife Razor Saw Flat Chisel, 1/2" Medium Tooth File - 1/2" wide Household Pliers Soldering Iron White Glue Fine Tooth File - 1/2" wide

Read more less

HO-Scale Centering Springs #5 Style. Metal Centering Springs for #3 (old style), 5, 9, 20-Series, 40-Series, 58, 118 (old style), 505, 506, 507 and 508 Couplers. Package Includes: (1) Dozen #634 Centering Springs #5 Style

Read more less

This industry leading coupler features an all metal coupler head, shank, and Whisker® centering spring and comes complete with insulated draft gearbox and lid. The #142 Magne-Matic® Whisker® Metal Coupler may be mounted with the included #242 Snap-Together Gearbox or with other manufacturers cast-on coupler pockets. It is not recommended to use a metal coupler directly on a metal surface or in a metal draft gearbox to avoid possible electrical crossover and shorting that may cause damage. Use the provided insulated gearbox or insulated #22 coupler. HO-Scale Package Includes: (2) Pair #142 Whisker® Metal Couplers - Medium Overset Shank (2) Pair #242 Snap-Together Gearboxes (2) #622 Knuckle Springs #142 Whisker® Metal Coupler Features: Material  -   Metal Shank Length  -  Medium(9/32") (center hole to back of coupler head) Coupler Offset  -   Overset Knuckle Spring  -   #622 Centering System  -   Whisker® Head  -   Standard Head Works In Place of  -   #22, #32 (#142 in a #252 box), Medium Overset "clone" couplers Works With  -   #213, #232, #234, #242, #252, #262, manufacturer cast-on draft gearboxes #242 Snap-Together Gearbox Features: Material  -   Insulated Plastic Lid Type  -   Snap-Together Dimensions  -   7/16"L x 5/16"W x 1/8"H Works With  -   NO.5®, #58, 20-Series and 40-Series, All Whisker® Couplers Mounting Specifications: Mounting Height  -   1/2" Centerline  -   25/64" Trip Pin Height  -   1/32" Center Hole  -   2-56 Insulated Screws are the most commonly used. (Screw length will vary) Recommended Tools: #206 Insulated Muti-Purpose Coupler Height Gauge #231 Greas-em Dry Graphite Lubricant #237 Coupler Trip Pin Pliers #240 Double Headed Pin Vise #241 Dual Tool Manual Uncoupling Tool and Spring Pick #246 Tap (2-56) and Drills (#50 and #43)

Read more less

Truck Talgo Mount Coupler for Early Tyco Metal Trucks & Craftsman KitsMetal Coupler with insulated Draft Gear Box and Lid, bronze Centering Spring and side and smaller center screw mounting hole used for truck mounting situations, similar to NO.5® Coupler. It is not recommended to use a metal coupler directly on a metal surface or in a metal draft gearbox to avoid possible electrical crossover and shorting that may cause damage. HO-Scale Package Includes: (2) Pair NO.5® Metal Couplers - Medium Centerset Shank (2) Pair #634 Centering Spring NO.5® Style (2) Pair #9 draft Gearboxes (2) #622 Knuckle Springs NO.5® Metal Coupler Features: Material  -   Metal Shank Length  -   Medium (9/32") (center hole to back of coupler head) Coupler Offset  -   Centerset Knuckle Spring  -   #622 Centering System  -   Standard Shank Centering Spring  -   #634 Centering Spring NO.5® Style Head  -   Standard Head #9 Plastic Draft Gearboxes & Lids Features: Material  -   Insulated Plastic Dimensions  -   29/64"L x 19/64"W x 7/64"H Mounting Specifications: Mounting Height -top of gearbox  -   29/64" Mounting Height -bottom of gearbox  -   21/64" Centerline  -   25/64" Trip Pin Height  -   1/32" Center Hole  -  0-48 Self-Tapping are the most commonly used. (Screw length will vary) Side Holes  -   0-48 Self-Tapping or 0-80 Machine Screws. (Screw length will vary) Recommended Tools: #206 Insulated Muti-Purpose Coupler Height Gauge #231 Greas-em Dry Graphite Lubricant #237 Coupler Trip Pin Pliers #240 Double Headed Pin Vise #241 Dual Tool Manual Uncoupling Tool and Spring Pick

Read more less

This industry leading coupler features an all metal standard coupler, and #634 standard centering spring and comes complete with insulated draft gearbox and lid. The NO.5® Magne-Matic® Metal Coupler may be mounted with the included #232 Gearbox or with other manufacturers cast-on coupler pockets. The 148 Whisker® Coupler is equivalent to the NO.5® Metal Coupler. It is not recommended to use a metal coupler directly on a metal surface or in a metal draft gearbox to avoid possible electrical crossover and shorting that may cause damage. Use the provided insulated gearbox or insulated #28 coupler. HO-Scale Package Includes: (2) Pair NO.5® Metal Couplers - Medium Centerset Shank (2) Pair #634 Centering Spring NO.5® Style (2) Pair #232 Gearboxes (2) #622 Knuckle Springs NO.5® Metal Coupler Features: Material  -   Metal Shank Length  -   Medium (9/32") (center hole to back of coupler head) Coupler Offset  -   Centerset Knuckle Spring  -   #622 Centering System  -   Standard Shank Centering Spring  -   #634 Centering Spring NO.5® Style Head  -   Standard Head Works In Place of  -   #58, #28, #118, #119, #148, #158, most medium centerset "clone" couplers Works With  -   #213, #232, #234, #242, most manufacturer cast-on draft gearboxes #232 Plastic Draft Gearboxes & Lids Features: Material  -   Insulated Plastic Dimensions  -   29/64"L x 19/64"W x 7/64"H Works With  -   NO.5®, #58, 20-Series and all Whisker® Couplers Mounting Specifications: Mounting Height  -   29/64" Centerline  -   25/64" Trip Pin Height  -   1/32" Center Hole  -   2-56 Insulated Screws are the most commonly used. (Screw length will vary) Side Holes  -   0-48 Self-Tapping or 0-80 Machine Screws. (Screw length will vary) Recommended Tools: #206 Insulated Muti-Purpose Coupler Height Gauge #231 Greas-em Dry Graphite Lubricant #237 Coupler Trip Pin Pliers #240 Double Headed Pin Vise #241 Dual Tool Manual Uncoupling Tool and Spring Pick #246 Tap (2-56) and Drills (#50 and #43) #780 Tap (0-80) and Drills (#55 and #52)

Read more less

Code 83 HO Scale Nickel Silver Rail 22″ Radius Left Manual Snap-Switch

Read more less

The Atlas 847 Track Assortment offers HO scale modelers a comprehensive set of Code 100 Nickel Silver Rail tracks. These tracks are made with high quality materials for durability and smooth performance. Perfect for creating realistic and reliable train layouts. Code 100 Nickel Silver Rail For quick, solder-less connections from the power pack to track. Assortment Pack Includes: 2 x 3/4″ Straight Track 2 x 1″ Straight Track 2 x 1-1/4″ Straight Track 2 x 1-1/2″ Straight Track 2 x 2″ Straight Track 2 x 2-1/2″ Straight Track More Information Item # 847 Brand Atlas Model Railroad Scale HO (Code 100) MSRP $9.50  TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable

Read more less

Track is the most important model on your HO Scale layout, and WalthersTrack makes it easy to create realistic mainlines, sidings and more with Code 83 rail! Combining great looks and great performance in a complete system, each item comes fully assembled and features: Thin profile ties in realistic dark brown with enhanced wood grain detail Fine profile molded spike and tie plate details on each tie Spike-mounting holes positioned next to the rail Molded starter points on underside of ties for Track Nails (948-83106, sold separately) Custom formulated nickel silver rail for outstanding electrical conductivity In addition to these details, each DCC-friendly Code 83 Turnout features: Snap-action points Solid rail points for better conductivity Isolated frogs with built-in jumper for powering as desired Current jumpers entering and leaving the frogs Insulated tie bar Click here for how-to-tips and video on replacing turnout springs.Full Instructions More Information Item # 948-83013 Brand WalthersTrack  Scale HO MSRP $31.98  TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable

Read more less

This Kato N Scale EMD SD40-2 Early Production is based on locomotives beginning in 1972. The EMD SD40-2 went on to become the most popular EMD road locomotive with over 3,900 constructed. This model is based on early production units. Features of this diesel includes a detailed, injection-molded body, five-pole motor with dual flywheels, all-wheel electrical pickup, heavy die cast metal chassis, a lighting control board that can be swapped for a DCC decoder when you're ready (available separately), fine decoration, directional LED headlights and Kato magnetic knuckle couplers. More Information Item # 176-4823 Brand Kato Scale N Type EMD SD40-2 Early Production Engine Electronics DC Road Name Burlington Northern Road Number 6361 MSRP $125.00

Read more less

This Kato N Scale EMD SD40-2 Early Production is based on locomotives beginning in 1972. The EMD SD40-2 went on to become the most popular EMD road locomotive with over 3,900 constructed. This model is based on early production units. Features of this diesel includes a detailed, injection-molded body, five-pole motor with dual flywheels, all-wheel electrical pickup, heavy die cast metal chassis, a lighting control board that can be swapped for a DCC decoder when you're ready (available separately), fine decoration, directional LED headlights and Kato magnetic knuckle couplers. More Information Item # 176-4822 Brand Kato Scale N Type EMD SD40-2 Early Production Engine Electronics DC Road Name Burlington Northern Road Number 6328 MSRP $125.00

Read more less

All aboard for hours of HO model railroading fun with the WalthersTrainline Flyer Express starter set. With everything you need to get going, each is complete with: Hobby-quality all-in-one sets built for years of fun Power-Loc(TM) Track with: - Nickel silver rail, brown ties and gray roadbed for more realism - Simple, sturdy construction, snaps-together without tools or rail joiners! - Includes 14 track sections to build a 38 x 45" (0.96 x 1.1m) oval Expand any time with matching track and accessories available separately Powered GP15-1 diesel with working headlight 3 assembled cars with metal wheels and Proto MAX(TM) metal knuckle couplers: - Matching wide vision caboose - 53' Norfolk Southern smooth side gondola - 50' Conrail insulated boxcar Power pack and speed/direction controller Full-color "Walthers Getting Started Guide" for new modelers Complete set-up and operating instructions

Read more less