Digitrax SP26158BC | 26.5x15.5x9mm 8 Ohm Box Speaker - Sealed Enclosure & 2-Pin Plug | Multi Scale
Earn 120 points · Sign in to earn · Rewards
Description
The Digitrax SP26158BC is a 26.5 x 15.5 x 9mm 8 ohm speaker supplied in a sealed enclosure and terminated in a 2-pin plug. If your decoder or locomotive motherboard has a matching speaker socket, this is the no-solder option: unplug the old speaker, plug this one in, and the install is done. The sealed box does the acoustic work that a bare cone cannot.
Looking for more DCC sound gear? Browse our DCC Speakers, DCC Decoders, and DCC Accessories.
- 2-pin plug terminated - drops straight onto compatible Digitrax motherboards and decoders with a speaker socket. No soldering at the speaker end.
- Sealed enclosure included. Nothing to scratch-build; the box stops the rear wave cancelling the front wave, which is where volume and low end come from.
- 26.5 x 15.5 x 9mm footprint fits HO diesel hoods, steam tenders and O scale frames where a 28mm round speaker will not clear.
- 8 ohm, 1/2 watt - matches the speaker output on most DCC sound decoders.
- Same speaker and box as the Digitrax SP26158B; the only difference is the plug instead of bare wires.
| Brand | Digitrax |
| Item Number | SP26158BC |
| Product Type | DCC Sound Decoder Speaker with Enclosure |
| Speaker Shape | Rectangular box |
| Dimensions | 26.5 mm x 15.5 mm x 9 mm |
| Impedance | 8 Ohm |
| Power | 1/2 Watt |
| Enclosure | Included, sealed |
| Connection | 2-pin plug |
| Recommended Scale | HO, O, G |
| Condition | New |
What is the difference between the SP26158BC and the SP26158B?
Only the connection. The BC ends in a 2-pin plug for decoders and motherboards with a speaker socket. The B has bare interface wires you solder to the decoder pads. Speaker, enclosure and specs are otherwise identical.
Will the plug fit my decoder?
It mates with the 2-pin speaker socket used on compatible Digitrax locomotive motherboards. If your decoder has solder pads rather than a socket, order the SP26158B with bare wires, or cut the plug off and solder the leads.
Do I still need to build a baffle?
No. The enclosure is included and already sealed. Mount it where the opening is not blocked by the frame or a weight and you are finished.
Will it work with my sound decoder?
Any DCC sound decoder rated for an 8 ohm speaker output. If your decoder manual specifies 32 ohms, use a 32 ohm speaker such as the Digitrax SP531832B instead.
Specifications
| Scale | HO Scale, O Scale, G Scale, Multi Scale |
|---|---|
| TCA grading | C-10 Mint—Brand New |
| Manufacturer | Digitrax |
| Part # | 245-SP26158BC |