Lionel 6-12025 | FasTrack 4-1/2" Straight Track Section | O Gauge

Description

The Lionel 6-12025 is a 4-1/2" straight track section from Lionel's FasTrack system — the easy-to-assemble three-rail O gauge track that's been the backbone of Lionel layouts since 2003. This shorter straight is a perfect filler piece for tight spots, custom layouts, sidings, and yard ladder arrangements where a full 10" straight is too long.

What's Included
  • One Lionel FasTrack 4-1/2" straight track section
  • Built-in roadbed with simulated ballast and tie detail
  • Solid nickel-silver running rails and center rail
  • Pre-installed track-pin connectors on each end
Specifications
Brand Lionel
Item Number 6-12025
Track System FasTrack
Gauge / Scale O Gauge / O Scale
Type Straight Section
Length 4-1/2"
Construction Three-rail with built-in roadbed
Compatibility Lionel FasTrack system (all FasTrack pieces snap together)
About FasTrack

FasTrack is Lionel's modern O-gauge track system, designed to look great straight out of the box with realistic gray ballast and dark-tie detail molded into the roadbed. The track snaps together with built-in connectors — no separate track pins to fumble with, no roadbed to add later. FasTrack is fully compatible with all Lionel O gauge locomotives and rolling stock that run on traditional tubular O track, including conventional transformer control and TMCC/Legacy command systems.

FAQ

Will it work with Lionel O27 trains?
Yes — FasTrack is O gauge, and most O27 trains will run on it. FasTrack curves are O36 minimum, so very small O27-only locomotives may not navigate the tightest curves, but straight pieces like this 4-1/2" work fine with anything O gauge or O27.

Can I mix this with traditional tubular O track?
Lionel makes adapter pieces to connect FasTrack to tubular O. The adapters are sold separately.

Why use a 4-1/2" straight instead of a 10" straight?
Short straights are essential for fitting yards, sidings, and tight spots into your layout. A 4-1/2" piece lets you adjust spacing in increments smaller than the standard 10".

More From Squeaky's
Product form

The Lionel 6-12025 is a 4-1/2" straight track section from Lionel's FasTrack system — the easy-to-assemble three-rail O gauge track... Read more

SKU: 6-12025
Barcode: 023922120250

Out of stock

$4.99

      Free Shipping

    This product comes with free shipping at no extra cost. Orders that include this item can combine additional products to take full advantage of the free shipping benefit.

    • 30 Days Free Returns
    • Top-notch Packaging
    • 100% Secure Payments

    Description

    The Lionel 6-12025 is a 4-1/2" straight track section from Lionel's FasTrack system — the easy-to-assemble three-rail O gauge track that's been the backbone of Lionel layouts since 2003. This shorter straight is a perfect filler piece for tight spots, custom layouts, sidings, and yard ladder arrangements where a full 10" straight is too long.

    What's Included
    • One Lionel FasTrack 4-1/2" straight track section
    • Built-in roadbed with simulated ballast and tie detail
    • Solid nickel-silver running rails and center rail
    • Pre-installed track-pin connectors on each end
    Specifications
    Brand Lionel
    Item Number 6-12025
    Track System FasTrack
    Gauge / Scale O Gauge / O Scale
    Type Straight Section
    Length 4-1/2"
    Construction Three-rail with built-in roadbed
    Compatibility Lionel FasTrack system (all FasTrack pieces snap together)
    About FasTrack

    FasTrack is Lionel's modern O-gauge track system, designed to look great straight out of the box with realistic gray ballast and dark-tie detail molded into the roadbed. The track snaps together with built-in connectors — no separate track pins to fumble with, no roadbed to add later. FasTrack is fully compatible with all Lionel O gauge locomotives and rolling stock that run on traditional tubular O track, including conventional transformer control and TMCC/Legacy command systems.

    FAQ

    Will it work with Lionel O27 trains?
    Yes — FasTrack is O gauge, and most O27 trains will run on it. FasTrack curves are O36 minimum, so very small O27-only locomotives may not navigate the tightest curves, but straight pieces like this 4-1/2" work fine with anything O gauge or O27.

    Can I mix this with traditional tubular O track?
    Lionel makes adapter pieces to connect FasTrack to tubular O. The adapters are sold separately.

    Why use a 4-1/2" straight instead of a 10" straight?
    Short straights are essential for fitting yards, sidings, and tight spots into your layout. A 4-1/2" piece lets you adjust spacing in increments smaller than the standard 10".

    More From Squeaky's

    Recently viewed products

      © 2026 Squeaky's Trains & Things, Powered by Shopify

        • Amazon
        • American Express
        • Apple Pay
        • Diners Club
        • Discover
        • Google Pay
        • Mastercard
        • PayPal
        • Shop Pay
        • Visa

        Login

        Forgot your password?

        Don't have an account yet?
        Create account