Peco SL-86 | Code 100 Curved Double Radius Turnout - Streamline, Right Hand, Insulfrog | HO Scale

Description

The Peco SL-86 is a Code 100 Streamline curved double radius turnout, right hand, with an Insulfrog (insulated, all-plastic frog) for HO and OO layouts. It is putting a junction or siding right on a curve, so you keep the flowing look of the mainline instead of forcing a straight section in. Code 100 rail accepts flanges up to 1.6mm deep, so older deep-flange equipment and current RP-25 wheels run side by side without trouble.

Both routes curve the same way: the inner road follows a 30" (762mm) radius and the outer road a 60" (1524mm) radius, with a 12 degree divergence between them. Because every Peco Code 100 turnout shares that geometry, small, medium and large radius points combine cleanly into ladders, crossovers and junctions.

Specifications

Manufacturer Peco
Part Number SL-86 (Walthers 552-SL86)
Scale HO / OO (16.5mm gauge)
Rail Code 100 nickel silver
Track System Peco Streamline
Type Curved Double Radius Turnout
Hand Right Hand
Frog Insulfrog (insulated plastic frog)
Radius 30" (762mm) inner and 60" (1524mm) outer radius
Angle 12 degrees
Length 258mm (10.2")
Quantity 1 turnout
UPC 5050881036501

Features

  • Code 100 nickel silver rail, compatible with Atlas, Walthers and other Code 100 HO track using standard rail joiners
  • Insulfrog design: the plastic frog is insulated, so it works out of the box on DC or DCC with no frog wiring
  • Built-in over-center spring holds the points firmly in either position, so you can throw it by hand or add a switch machine later
  • Wood-grain sleepers (ties) molded with a realistic spacing
  • Shares Peco's common 12 degree geometry, so it lines up with every other Code 100 Streamline turnout and crossing

Frequently Asked Questions

Will it work with my Atlas or Walthers Code 100 track?
Yes. Code 100 is a rail height standard, so Peco Code 100 connects to any other Code 100 HO track with ordinary rail joiners.

What is the difference between Insulfrog and Electrofrog?
An Insulfrog has an insulated plastic frog, so it works straight out of the box on DC or DCC with no extra wiring. The Electrofrog version has a live metal frog for the best slow-speed running, but it needs insulated joiners and frog wiring.

Does it come with a switch machine?
No. The turnout has a built-in spring and can be thrown by hand. For remote control, it accepts a Peco point motor or an under-table machine such as the Circuitron Tortoise.

Are rail joiners included?
No. Pick up a pack of Peco SL-10 Code 100 rail joiners to connect it to the rest of your layout.

Is there a matching turnout for the other direction?
Yes. See the More in This Series list below for the other Peco Code 100 turnouts we carry.

More in This Series

Explore More

Product form

The Peco SL-86 is a Code 100 Streamline curved double radius turnout, right hand, with an Insulfrog (insulated, all-plastic frog)... Read more

Free pickup in our shop(s)

SKU: 552-SL86
Barcode: 5050881036501

1 In Stock In Store

$36.99

    • Shipped today? Order within: Oct 29, 2026 06:00:00 -0400
    • 30 Days Free Returns
    • Top-notch Packaging
    • 100% Secure Payments

    Description

    The Peco SL-86 is a Code 100 Streamline curved double radius turnout, right hand, with an Insulfrog (insulated, all-plastic frog) for HO and OO layouts. It is putting a junction or siding right on a curve, so you keep the flowing look of the mainline instead of forcing a straight section in. Code 100 rail accepts flanges up to 1.6mm deep, so older deep-flange equipment and current RP-25 wheels run side by side without trouble.

    Both routes curve the same way: the inner road follows a 30" (762mm) radius and the outer road a 60" (1524mm) radius, with a 12 degree divergence between them. Because every Peco Code 100 turnout shares that geometry, small, medium and large radius points combine cleanly into ladders, crossovers and junctions.

    Specifications

    Manufacturer Peco
    Part Number SL-86 (Walthers 552-SL86)
    Scale HO / OO (16.5mm gauge)
    Rail Code 100 nickel silver
    Track System Peco Streamline
    Type Curved Double Radius Turnout
    Hand Right Hand
    Frog Insulfrog (insulated plastic frog)
    Radius 30" (762mm) inner and 60" (1524mm) outer radius
    Angle 12 degrees
    Length 258mm (10.2")
    Quantity 1 turnout
    UPC 5050881036501

    Features

    • Code 100 nickel silver rail, compatible with Atlas, Walthers and other Code 100 HO track using standard rail joiners
    • Insulfrog design: the plastic frog is insulated, so it works out of the box on DC or DCC with no frog wiring
    • Built-in over-center spring holds the points firmly in either position, so you can throw it by hand or add a switch machine later
    • Wood-grain sleepers (ties) molded with a realistic spacing
    • Shares Peco's common 12 degree geometry, so it lines up with every other Code 100 Streamline turnout and crossing

    Frequently Asked Questions

    Will it work with my Atlas or Walthers Code 100 track?
    Yes. Code 100 is a rail height standard, so Peco Code 100 connects to any other Code 100 HO track with ordinary rail joiners.

    What is the difference between Insulfrog and Electrofrog?
    An Insulfrog has an insulated plastic frog, so it works straight out of the box on DC or DCC with no extra wiring. The Electrofrog version has a live metal frog for the best slow-speed running, but it needs insulated joiners and frog wiring.

    Does it come with a switch machine?
    No. The turnout has a built-in spring and can be thrown by hand. For remote control, it accepts a Peco point motor or an under-table machine such as the Circuitron Tortoise.

    Are rail joiners included?
    No. Pick up a pack of Peco SL-10 Code 100 rail joiners to connect it to the rest of your layout.

    Is there a matching turnout for the other direction?
    Yes. See the More in This Series list below for the other Peco Code 100 turnouts we carry.

    More in This Series

    Explore More

    Recently viewed products

      About Squeaky's Trains

      Squeaky’s Trains & Things LLC was founded in December of 2019 and officially launched in January 2020. It was started by our family that has been in love with everything, trains large and small, driven by creativity since we were born. We grew up playing with model trains and watching, learning about and studying different aspects of magnificent locomotives on a daily basis and today we still do. All our in-house products are created, custom designed and manufactured by our family in the United States. We offer a large variety of items from model train products to hobby supplies.

      © 2026 Squeaky's Trains & Things, Powered by Shopify

        • Amazon
        • American Express
        • Apple Pay
        • Diners Club
        • Discover
        • Google Pay
        • Mastercard
        • PayPal
        • Shop Pay
        • Visa

        Login

        Forgot your password?

        Don't have an account yet?
        Create account