The WOW101 is a universal decoder for locomotives with DCC-ready 9-pin plugs, or locomotives which cannot accommodate a motherboard or WOWKit. This decoder may be hard-wired or plugged directly into any locomotive with a 9-pin JST plug. The WOW101 is compatible with any T-Series harness, and also includes an auxiliary harness for attaching your speaker, CAM, Keep Alive®, and for the additional lighting functions (F3 and F4). CD-Quality Sound: TCS’ world-renowned CD-quality sound. 16 Bits of resolution at 44.1kHz sample rate. Back EMF Load Compensation: Provides superior slow speed control and high performance under load. Quiet Drive: Super-quiet motor control for “buzz” free motor performance. DC Mode: Decoder will automatically detect DC power. You can also configure how your lighting effects function on DC. Variable Momentum: Allows you to make custom acceleration and deceleration curves. Incandescent Bulb Support: This decoder can be used with 12 Volt bulbs. Function Remapping: Buttons 0 through 12 may be used to control the lighting functions of this decoder. Programmable Lighting Effects: Choose from 20 separate user-programmable lighting effects! Dimmable Brightness: Configure multiple different brightness levels for your LED’s or incandescent bulbs. Decoder Lock: Feature which prevents accidental/unwanted programming while activated. Airwire™ Compatible: Fully compatible with Airwire™ operation. CAM: Use a positive voltage trigger to synchronize your chuff rate to your drivers’ rotation. Audio Assist®: TCS exclusive auditory feedback programming system. Program your decoder without the need to memorize CV’s! User-Loadable Speed Tables: Configure custom speed curves and set speed limits. Throttle Modes: Choose from multiple throttle modes to meet your operating needs. True Scale Sound: A unique WOWSound feature which uses TCS’ exclusive auto-adjusting BEMF technology to automatically change the intensity of the chuff. Prototype Mode also offers dynamic sound volumes which accurately model the real-life equivalent. Also includes pre-programmed acceleration and deceleration values. Specs Interface Type: Hard-Wire, Direct-Plug (9-Pin JST) Dimensions (L x W x H): 1.35” x .66” x 0.22” or 34.29mm x 16.72mm x 5.59mm Scale: HO Scale Continuous/Peak: 1.3/2.0 Amp Total Functions: 6 Function Rating: 100 mA 12V Outputs: 6 Speaker Selection This decoder is optimized for 8 Ω speakers (not included). This decoder uses and audio amplifier capable of supplying up to 2 Watts of power. A 1 Watt minimum power rating is recommended for use with this decoder. If you are using a speaker with less than 1 Watt power rating, you must reduce your volume to prevent speaker failure or amplifier stress. Speaker enclosures greatly increase speaker performance in most cases.

Read more less

Hand Crafted 500-Gallon Propane Tank uniquely created by Squeaky’s Trains & Things. 3 Pack. 3D printed with high quality materials. HO Scale Size (1:87) Hand painted, each tank is unique. Unpainted also available.

Read more less

Paper mills are some of the busiest spots along the railroads that serve them and the Walthers Cornerstone Superior Paper Mill kit will be the heart of your bustling N Scale paper mill complex. Tons of raw materials arrive at the paper mill complex in specialized cars including woodchip gondolas and pulpwood flats, along with a variety of chemicals and slurries that are shipped in tank cars. Finished products are also shipped by rail, typically in special service boxcars. The Superior Paper kit comes with two complete buildings to begin operations, which could also be used to model a variety of other industries. The first step in paper-making is the kraft (German for strength) mill, where wood is transformed into pulp. This modern steel structure is complete with large smokestacks and a variety of other details. (Used by itself, this building makes a great modern powerhouse for an electric utility or major industry.) Pulp is processed in the Main Building, a large brick structure that's complete with pulp vats, loading docks, separate windows and many other details. Detailed instructions are provided for the entire complex, along with colorful sign decals. The finished Superior Paper Co. Mill measures: Main Building: 12-1/2 x 7" 31.7 x 17.7cm Kraft Mill: 7-1/16 x 4-3/4" 17.9 x 12cm Superior Paper Mill is just one of a wide variety of Cornerstone N Scale industrial buildings. Big industry in a layout-sized space Perfect for 1950s and later layouts Railcar door Corrugated kraft mill Brick construction on a concrete foundation Four truck bay dock doors Two pulp tanks Rooftop vents and stacks Exterior tanks Decal signs Molded in appropriate colors and clear plastic More Information Item # 933-3237 Brand Walthers Cornerstone  Scale N Type Building Kit Size Main Building: 12-1/2 x 7" or 31.7 x 17.7cm Kraft Mill: 7-1/16 x 4-3/4" or 17.9 x 12cm Availability In-Stock/Restockable TCA Grading C-10 Mint - Brand New Instruction Sheet View/Download

Read more less

Layout residents can savor a Yoo-hoo or a sody-pop while waiting for the mechanic to change the oil and fix a tire. Details include signs, posters, old gas pumps, old and new tires, a pop machine, junk and more! See photos for footprint. This structure comes with pre-installed LED lighting made for use with the Just Plug® Lighting System. 25mA RoHS Compliant Colors may vary from actual product.

Read more less

A set of six kids, several small and large snowballs, and a snowman. Five kids are engaged in the fight, while one has slipped and fallen to the ground. Set contains 10 pieces. N Scale Colors may vary from actual product.

Read more less

Brand: JT's Mega Steam Scent: Big Boy-Premium Blend Size: 2 Oz Glass Bottle with Eye Dropper Made in the USA

Read more less

Outhouses by Squeaky's Trains. 2 Pack (1 with door open, 1 with door closed) Exclusive Design by Squeaky's Trains. 3D printed with high quality materials. HO Scale Size (1:87) Hand painted, each outhouse is unique. Unpainted also available.

Read more less

The AM-1 is a module that you can install on your model train layout and control 4 turnouts (switch tracks). The AM-1 can be controlled and setup by a Ring Engineering RailPro Controller, such as the HC-2 Handheld Controller. The AM-1 can also be used to control Accessory Projects. You can control a turntable, swing bridge, oil pumps, lights in buildings, and much more!!! You can use our RailPro Assistant Software to design custom screens for your HC-2 to control your accessories!!! Features: Control up to 4 turnouts per Module Control Snap or Motor Operated Turnouts Size: 4.60 x 3.00 x 1.18 inches     Important Note: When an AM-1 is used as an Accessory Module, the AM-1 hardware has 8 outputs that can be software controlled for 4 motor outputs or 8 sourcing outputs. It also has another 8 I/O that can be configured for 8 inputs or 8 sinking outputs. Currently there is only one software configuration available for the module (2 motor outputs, 4 sinking outputs, and 8 inputs). We expect to offer more software configurations in the future.  

Read more less

Sure to be the focal point of any N Scale engine terminal, this Walthers Cornerstone 130' Motorized Turntable is where steam locomotives, and later diesels, were turned around at the end of their runs. Normally serving a roundhouse, turntables were placed adjoining the roundhouse, servicing tracks and at major terminals, backshops. This 130' turntable is large enough to turn larger locomotives such as a 4-8-4 Northerns, 2-10-2s all the way up to a 4-8-8-4 Big Boy. It'll look great at your locomotive terminal, at junctions and anywhere else large steam locomotives must be turned. On your layout use the 130' Motorized Turntable as the heart of your servicing facility alongside other Cornerstone N Scale railroad buildings. 130' length typical of large tables built from 1920s on - some still in service today Must-have detail for engine terminals Holds locos up to 9-3/4" 24.7cm long - big enough for a 4-8-8-4! Layout mounting templates for pit and Cornerstone Turntable Control Box User-friendly, illustrated instructions simplify assembly Requires 9-15/16" 25.2cm mounting hole to be cut in layout for installation 10-3/8" 26.3cm overall diameter Control Box included for use on layouts with DC or DCC train control New Cornerstone Turntable Control Box for simple operation and programming with: Programmable indexing for up to 99 different tracks One-touch 180-degree bridge rotation in either direction Simplified LED display with adjustable brightness Operable from up to four remote locations with additional Control Boxes (933-2320 each sold separately) Optional: To control turntable operation with DCC throttle or serial UART controller, purchase Cornerstone Advanced Control Module (933-2321, available separately) Comes complete with motor and Control Box, operates on 12-18v AC, 16-24v DC power supply (power supply not included) Comes with Code 80 rail installed on bridge

Read more less

Keep raw materials moving along your railroad with the Cornerstone Rotary Dumper kit! Designed to unload cars without the need for uncoupling, the prototypes serve a variety of industries that require large volumes of bulk material such as coal, woodchips and limestone. Designed for easy construction, this detailed structure kit features:  Essential detail for modern heavy industries Prototypes in service from the 1970s to the present Use with powerplants, paper mills, steel mills and more Highly detailed plastic partsModel a complete power grid with these Cornerstone kits, including the Coal Conveyor with Transfer House (#933-4171), Modern High-Voltage Transmission Towers (#933-3343), Lakeshore Energy Power Plant (#933-4172), Substation (#933-4175), Intermediate Height "Wood" Utility Poles (#933-4173), plus SceneMaster Utility Poles (#949-4120) and Utility Company Vehicles (#949-11636 series), each sold separately   Kit measures: 10 x 6-1/8 x 3-1/4" 25.4 x 15.5 x 8.2cm; Required depth clearance: 2-3/8" 6cm The Rotary Dumper is just one of a wide variety of Cornerstone industrial buildings.   

Read more less

Blunami will change the way you enjoy the model railroading hobby! The Blunami BLU-4408The BLU-4408 is designed to wirelessly operate models with higher stall currents such as some S, O, and large scale locomotives; this decoder features easy-to-use terminal blocks for no-fault wiring and a higher audio amplifier for awesome volume, indoors or out. Blunami decoders can be operated in three different ways: DC, DCC and Wireless mode. Using the Blunami app (iOS versions 8 or later), you can operate your locomotive with incredible ease of use. You will feel like you are in the cab with the amazing new features that Tsunami2 has to offer including: Reactive Dynamic Digital Exhaust, Functioning locomotive and train brakes, injectors, power reverse, and firebox flicker. We also offer a large selection of selectable sound effects including: exhaust chuffs(10), prime movers (up to 12), bells (12), Whistles (90), airhorns (40+), couplers, dynamos and more! DYNAMIC DIGITAL EXHAUST For added realism, you’ll love our reactive Dynamic Digital Exhaust (DDE) feature. When your locomotive is traveling across flat terrain and simply maintaining speed, you will hear your locomotive chugging along. But, when the locomotive encounters a grade and the engineer applies more throttle to get the train up the hill, the engine sounds will automatically react and reflect the increase of power needed to crest the hill. DDE accomplishes this by calculating the changes in strain or load on the motor and adjusting the exhaust to appropriately simulate the work the engineer would be doing to the throttle of the engine. This gives Tsunami2 the ability to create the most realistic experience possible.HIGH QUALITY SOUND LIBRARYOur large selection of high quality sound effects include:  10 Exhaust Chuffs Up to 12 Prime Movers in each sound profile  Up to 12 Bells  90 Whistles 40+ Airhorns Additional couplers, dynamos, cab chatter and more! ADDED REALISMAdditional realism can be simulated by adding functioning locomotive and train brakes, injectors, power reverse, firebox flicker and more. EASY INSTALLATIONNo soldering required! This decoder features easy-to-use terminal blocks for no-fault wiring. This 4-amp, universal-style format decoder includes a connector to easily add a CurrentKeeper (P.N. 810140 or 810160) to maintain performance over dirty track and switches. Dimensions: 69 x 30.5 x 14mm  Max. Motor Stall Current: 4A Max. Function Current: 400mA (each output) Function Outputs: 8 Audio Amplifier: 3 Watt, 8-Ohm Load DCC Track Voltage: 7.5V – 26V Sound Channels: 16   Blunami Owner's Manual Blunami Installation Guide Blunami Steam User's Guide Blunami Diesel User's Guide Blunami Electric User's Guide   Blunami Sound Selection References: Blunami Steam-2 Sound Selection Reference Blunami EMD Sound Selection Reference Blunami EMD-2 Sound Selection Reference Blunami GE Sound Selection Reference Blunami ALCO Sound Selection Reference Blunami Baldwin & Others Sound Selection Reference Blunami Electric Sound Selection Reference   Blunami Sound Samples Blunami Steam-2 Sounds Blunami EMD Blunami EMD-2 Sounds Blunami GE Sounds Blunami ALCO Sounds Blunami Baldwin & Other Diesel Sounds Blunmai Electric Sounds SoundTraxx A true pioneer in the model train industry, SoundTraxx has been creating innovative products for the discriminating model railroader since 1990. We proudly design and manufacture our industry-best products right here in the USA, and our friendly customer support staff work side-by-side with the rest of our product team.

Read more less