The easiest most cost effective way to add automatic reversing to one section of your DCC layout. AR1 Features: Cost effective automatic reversing for one reversing section or subdistrict User selectable trip current lets you adjust the AR1 to work with any scale or equipment on your layout Auto-Reversing manages polarity mismatches on the reversing track section without manually throwing electrical toggle switches or adding another booster 8 amp peak, 6 amp continuous Auto-reversing control for a single reversing district. Simple to wire 4 wire hookup, no locomotive wiring required No external power required, runs off track power AR1 operates with or without LocoNet, so it is compatible with all DCC systems. Alternatives to AR1 for Automatic Reversing on your layout: 1.  Use a double pole, double throw switch to manually allow for reversing. 2.  Use one Digitrax booster set for automatic reversing and another set for normal operation. 3.  Use a PM42 Quad Power Manager to handle 4 power sub-districts.  You can set these up to be automatic reversing or power managers to prevent short circuits from shutting down your layout. More Information Item # AR1  Brand Digitrax  MSRP $33.00  TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet, Specification Sheet

Read more less

The Hot Wire Foam Cutter makes clean, precise cuts, adjusts for angled cuts and cuts a path 4.5 in wide x 6 in deep (11.4 cm x 15.2 cm). Cutter heats instantly and leaves no mess. Use straight-rod option to cut in tight places and for faster cuts. Straight-rod cuts a path 3.5 in wide x 6 in deep (8.89 cm x 15.2 cm). The Hot Wire Foam Cutter Attachment: Bow and Guide (purchased separately) adds versatility to the Hot Wire Foam Cutter and cuts a path 4.5 in wide by 6 in deep (11.4 cm x 15.2 cm). Attach the Guide for precise angle cuts. Only use the nichrome replacement wire. To avoid the emission of toxic fumes, we recommend using the Hot Wire Foam Cutter and the Bow & Guide on Woodland Scenics foam products only. RoHS Compliant More Information Item # 1435 Brand Woodland Scenics  MSRP $49.99 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable

Read more less

Quad switch decoder for Solenoid or Slow-motion turnouts. Configurable for Capacitive Discharge with balky solenoids. Configurable for on/off control of 8 layout lights. Plug and play wire connectorization. Works with compatible LocoNet Systems. Stabilized and adjustable output voltages. Option setup switches for configuration. On-layout programmability via LocoNet. 8 onboard Routes, with EZ-Route setup. Routes directly editable using latest DT602 IPL. 8 input lines for Switch and Detection inputs. Field firmware update via IPL over LocoNet. DC 2mm jack for reliable power input. Optional DCC track inputs for limited feature capabilities. More Information Item # DS74  Brand Digitrax  MSRP $79.00  TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet, Specification Sheet

Read more less

Static-Tac is specially formulated and has the right viscosity for adhering Static Grass and Briar Patch. It comes in a bottle with a graduated tip that works for large or small areas. Static-Tac is an easy-to-spread adhesive that dries to a clear matte finish for realistic results.

Read more less

Enjoy complimentary shipping!Bundle your purchases for even more savings with our free shipping option. (This offer is optional) Blunami will change the way you enjoy the model railroading hobby! The Blunami BLU-4408The BLU-4408 is designed to wirelessly operate models with higher stall currents such as some S, O, and large scale locomotives; this decoder features easy-to-use terminal blocks for no-fault wiring and a higher audio amplifier for awesome volume, indoors or out. Blunami decoders can be operated in three different ways: DC, DCC and Wireless mode. Using the Blunami app (iOS versions 8 or later), you can operate your locomotive with incredible ease of use. You will feel like you are in the cab with the amazing new features that Tsunami2 has to offer including: Reactive Dynamic Digital Exhaust, Functioning locomotive and train brakes, injectors, power reverse, and firebox flicker. We also offer a large selection of selectable sound effects including: exhaust chuffs(10), prime movers (up to 12), bells (12), Whistles (90), airhorns (40+), couplers, dynamos and more! DYNAMIC DIGITAL EXHAUST For added realism, you’ll love our reactive Dynamic Digital Exhaust (DDE) feature. When your locomotive is traveling across flat terrain and simply maintaining speed, you will hear your locomotive chugging along. But, when the locomotive encounters a grade and the engineer applies more throttle to get the train up the hill, the engine sounds will automatically react and reflect the increase of power needed to crest the hill. DDE accomplishes this by calculating the changes in strain or load on the motor and adjusting the exhaust to appropriately simulate the work the engineer would be doing to the throttle of the engine. This gives Tsunami2 the ability to create the most realistic experience possible.HIGH QUALITY SOUND LIBRARYOur large selection of high quality sound effects include:  10 Exhaust Chuffs Up to 12 Prime Movers in each sound profile  Up to 12 Bells  90 Whistles 40+ Airhorns Additional couplers, dynamos, cab chatter and more! ADDED REALISMAdditional realism can be simulated by adding functioning locomotive and train brakes, injectors, power reverse, firebox flicker and more. EASY INSTALLATIONNo soldering required! This decoder features easy-to-use terminal blocks for no-fault wiring. This 4-amp, universal-style format decoder includes a connector to easily add a CurrentKeeper (P.N. 810140 or 810160) to maintain performance over dirty track and switches. Dimensions: 69 x 30.5 x 14mm  Max. Motor Stall Current: 4A Max. Function Current: 400mA (each output) Function Outputs: 8 Audio Amplifier: 3 Watt, 8-Ohm Load DCC Track Voltage: 7.5V – 26V Sound Channels: 16   Blunami Owner's Manual Blunami Installation Guide Blunami Steam User's Guide Blunami Diesel User's Guide Blunami Electric User's Guide   Blunami Sound Selection References: Blunami Steam-2 Sound Selection Reference Blunami EMD Sound Selection Reference Blunami EMD-2 Sound Selection Reference Blunami GE Sound Selection Reference Blunami ALCO Sound Selection Reference Blunami Baldwin & Others Sound Selection Reference Blunami Electric Sound Selection Reference   Blunami Sound Samples Blunami Steam-2 Sounds Blunami EMD Blunami EMD-2 Sounds Blunami GE Sounds Blunami ALCO Sounds Blunami Baldwin & Other Diesel Sounds Blunmai Electric Sounds SoundTraxx A true pioneer in the model train industry, SoundTraxx has been creating innovative products for the discriminating model railroader since 1990. We proudly design and manufacture our industry-best products right here in the USA, and our friendly customer support staff work side-by-side with the rest of our product team.

Read more less

Static Grass 70 grams Grass length: 2mm

Read more less

2 lights with 24" (60.9 cm) cable/pkg - 25mA each

Read more less

Enjoy complimentary shipping!Bundle your purchases for even more savings with our free shipping option. (This offer is optional) The TSU-4400 is designed for models with higher stall currents such as some S, O, and large scale locomotives; this decoder features easy-to-use terminal blocks for no-fault wiring and a higher audio amplifier for awesome volume, indoors or out. You will feel like you are in the cab with the amazing new features that Tsunami2 has to offer including: Reactive Dynamic Digital Exhaust, Functioning locomotive and train brakes, injectors, power reverse, and firebox flicker. We also offer a large selection of selectable sound effects including: exhaust chuffs(10), prime movers (up to 12), bells (12), Whistles (90), airhorns (40+), couplers, dynamos and more! This 4-amp, universal-style format decoder includes a connector to easily add a CurrentKeeper (P.N. STX810140) to maintain performance over dirty track and switches. Product Specifications: Sound Profile: Steam-2 Dimensions: 69 x 30.5 x 14mm Max. Motor Stall Current: 4A Max. Function Current: 400mA (each output) Function Outputs: 6 Audio Amplifier: 3 Watt, 8-Ohm Load DCC Track Voltage: 7.5V – 26V Sound Channels: 16

Read more less

The foam protects your locomotives and cars upside down or right side up. You can work on them and not damage the paint or details. For O (& some G) Scale models Dimensions: 8"w x 16"

Read more less

Use the Port Sharing Device with a Light Hub or Sequencing Light Hub to add up to four Stick-On or Nano LED Lights per Light Port. Provide power quickly and easily to all of your Just Plug products. Just Plug's modular design allows for easy expansion and gives you the ability to control individual light brightness.

Read more less

Wax adhesive for holding miniatures in place whilst allowing re-positioning. Easily remove with warm water and soap. 28 grams

Read more less

Scenic Cement is a ready-to-use spray or brush-on adhesive specially formulated to glue Ballast, Turf and other landscape materials to a layout. This multi-use product is non-toxic, water-based and dries to a matte finish. It contains a wetting agent that breaks surface tension, allowing easier and faster penetration of scenery materials for a strong bond. It also permeates instantly for maximum coverage. Apply with the Scenic Sprayer™ for a smooth, flowing application that reduces spray head clogging, foaming and bubbles. 16 fl oz (473 mL)

Read more less