These hand crafted Highway Concrete Barriers HO scale accurate are uniquely designed by Squeaky’s Trains & Things, 100% exclusive and only available from Squeaky’s Trains. Each and every barrier goes through an inspection before and after paint to insure the best quality finish possible. Condition: New Scale: HO Scale Accurate Size Length: 1.36″ / 34.6mm (10ft 1:87) Height:  0.35″ / 9.0mm Width: 0.31″ / 8.0mm Design: Exclusive 3D model designed by Squeaky’s Trains Manufacture: 3D printed with high quality materials Finish/Color: Concrete – hand painted, each barrier is unique and may have variations. Unpainted or un-finished 3D printed models may come in any base color that was available for use at the time of printing. Base color requests are accepted but not always possible to fulfill. Notes: Vehicles, coin, or other props not included.  

Read more less

Squeaky’s Trains – HO Scale – “Jersey” Concrete Traffic Barriers Our “Jersey” Temporary Concrete Barriers are HO scale accurate, 100% exclusive and only available from Squeaky’s Trains. Each and every barrier goes through an inspection to insure the best quality possible. Condition: New Scale: HO Scale Accurate Sizes Length: See Size Options Height:  0.35″ / 9.0mm Width: 0.31″ / 8.0mm Design: Exclusive 3D model designed by Squeaky’s Trains Manufacture: 3D printed with high quality materials Finish/Color: Unpainted, gray. Notes: Vehicles, coin, or other props not included.  Looking to purchase in bulk? Contact us for pricing.

Read more less

Hand Crafted 36″ Construction Cones uniquely created by Squeaky’s Trains & Things. 10 Pack. 3D printed with high quality materials. HO Scale Size: 0.39″ / 10mm (1:87) Notes: Vehicle Not Included. Unpainted or un-finished 3D printed models may come in any base color that was available for use at the time of printing. Base color requests are accepted but not always possible to fulfill. Please, no returns or refunds for base color reasons.

Read more less

The PTB-100 Programming Track Booster is a handy tool for anyone who uses DCC! This device facilitates programming as well as gives some comforting feedback during the programming process. You will instantly know if your decoder has received the programming instruction (or not!) by way of indicator lights on the circuit board. So why might you want (or need) a PTB-100? Certain command stations allow you to read a CV during Service Mode programming, which is useful to verify its current setting. Sometimes trouble reading or verifying CVs may be due to the design of the command station and the decoder itself. All decoders communicate back to the command station using what’s called an acknowledgement pulse, which is defined in NMRA RP-9.2.3 as “an increased load on the programming track of at least 60mA for at least 5ms.” Like most decoders, SoundTraxx Digital Sound Decoders generate the acknowledgment pulse by momentarily applying power to the motor. If the decoder is otherwise working properly (i.e., responds properly on the mainline to speed and direction commands), but the command station is having trouble reading CV data from the decoder, it may be due to incompatibilities between the electrical requirements of the sound decoder (which are different from conventional decoders due to the added audio circuitry) and the electrical characteristics of the programming track. In this case, you will need to use a programming track booster, such as the PTB-100. The PTB-100 amplifies the programming track signals to levels that work best with SoundTraxx Sound Decoders. It is easy to install and inexpensive. An advantage to using the PTB-100 is that it also provides short circuit detection and some helpful diagnostics. The PTB-100 is neither needed nor recommended for use with the Zimo MX1 or the Lenz LVZ100.

Read more less

"Dual Tool" Manual uncoupling tool & built in Spring Pic There are many modelers that wish to manual uncouple with a small tool and Kadee®offers the #241 "Dual Tool" manual uncoupler and spring pick combination. For manual uncoupling the #118 & #119 shelf coupler the #241 has a "pointed" end to fit around the top shelf. The other "blade" end of the #241 is for standard couplers, also, the blade end has nubs so it can double as a spring pick for inserting small coil springs. To manual uncouple the #118 & #119 coupler with the pointed end of the #241 "Dual Tool", first push the cars together where the coupler knuckles compress against each other, insert the pointed end against the "outside" of the hooked tip of the knuckle as illustrated (the knuckle is the moving part of the coupler head). As the point slips into the coupler it will push the knuckle past the hook of the opposing knuckle. To assist the uncoupling you can push the knuckle tip outward with the point, when the knuckle tips are past each other you can now separate the uncoupled cars.   Package Includes: (1) "Dual Tool" Manual uncoupling tool & built in Spring Pic

Read more less

Outhouses by Squeaky's Trains. 2 Pack (1 with door open, 1 with door closed) Exclusive Design by Squeaky's Trains. 3D printed with high quality materials. HO Scale Size (1:87) Hand painted, each outhouse is unique. Unpainted also available.

Read more less

This 25mm x 14mm speaker is a tough little beast capable of accepting 2W of audio and still producing a clear and accurate sound. The military spec. rating of these speakers means they are dust proof and IPX5 certified water proof. Truly an impressive speaker in a package small enough for most steam installs and the more dedicated diesel installs. Dimensions: 0.98″ x 0.55″ x 0.3″ or 25mm x 14mm x 7.5mm Sound Pressure Level: 81 dB ± 3.0 dB at 1W, .5m, 1.5 KHz. Effective Frequency Band: 400 Hz. to 20,000 Hz. Power Rating: 2W (Typical) 2.5W (Peak) DC Impedance: 8 Ω ± 15 % at 1.0V 900 Hz.

Read more less

Use Medium Green to model summer grasses. It also works great along roads and in ditches. 57.7 in3 (945 cm3) 1/16" - 1/8" (1 mm - 3 mm) in length

Read more less

Katie's Candy Creations is a WalthersTrainline business building that is a natural addition to any small or medium town storefront commercial district. Featuring a brick exterior, this fully assembled two-story structure is typical of Main Street businesses seen across the continent. This building features parts molded in appropriate colors so there's no painting needed. Colorful signs come applied to the built-up structure and factory-installed windows with realistic printed banners make this building ready to use in any scene along your railroad.  Figures, vehicles and accessories shown in the photo are sold separately. Assembled - 2-1/2 x 3-1/2 x 3-3/8" 6.3 x 8.8 x 8.5cm

Read more less

#532 - 36" Diameter Smooth Back Wheelsets (Code 88) - HO Scale Smooth wheelsets are most commonly found on diesel era rolling stock. Kadee® wheel sets are manufactured to the most exacting standards and feature: RP-25 contour, non-magnetic metal wheels and insulated needlepoint axles. Twelve Sets (1 Set = 1 Axle) Axle Tip to Tip: 1.018" Wheelset Features: Code 88 (.088") 36" Smooth Back Wheels Accurate markings Incredible detail true to prototype Non-magnetic Metal Wheels Smooth tracking Free rolling Contoured Insulated Axles RP-25 Free rolling wheels Needlepoint Axles Axle Tip to Tip: 1.018" Freight & Passenger Package Includes: (12) Sets #532 36" Diameter Smooth Back Wheelsets (Code 88)   The term Code 110 and Code 88 relates to the width of the wheels and has no relationship to track code. Code 110 wheels are .110" wide and Code 88 are .088" wide. Code 110 wheels are the common (or "Standard") width wheels and Code 88 are what is called "Semi-Scale" and are used when the modeler wants a more prototypical looking wheel width. Actual HO-Scale prototypical wheel width would be around .067" wide and although they will run OK on the average track they will not go through common turnouts and crossings. Code 88 (.088") is just about the minimum width of wheel that will run on most standard or common track if gauged correctly. It really is a matter of appearances because there's very little operational differences between running Code 110 or Code 88 wheels. Code 88 wheels look really good and are most noticeable on open frame cars like hoppers and tank cars. However, they also look great on boxcars, gondolas, and reefers but not quite as noticeable. As mentioned above track code and wheel code have no relationship meaning Code 110 and Code 88 will run on most any code of track. Track code is simply the measured height of the rail, code 100 is .100" tall, code 83 is .083" tall, code 70 is .070" tall, and so on.

Read more less