Great for railroads that preferred four-axle diesels for their passenger runs, prototypes for the WalthersProto EMD FP7 came equipped with more boiler water capacity on their stretched chassis. Providing enough steam to power train heat and some air conditioning systems on postwar trains taxed the standard water supply of standard EMD F7 A units set-up for passenger service, prompting EMD to roll out the new FP7 in 1949. Though outwardly similar to the F7A, FP7s were actually four feet longer to accommodate bigger water tanks with a capacity of 950 US gallons. Standard passenger power into the Amtrak era and beyond (with some also handling freight chores), these WalthersProto HO EMD FP7 replicas are fully assembled and ready for service with: One time run of these roadnumbers, order now - limited quantity available! Matches the prototypes' extended frame and body Available with ESU LokSound 5 Sound and DCC for DCC and DC layouts Railroad-specific details Five-pole, skew-wound, high-torque, high-efficiency can motor Helical gears with 14:1 ratio for smooth, ultra-quiet running Easy multiple-unit operation Correct RP-25 wheels Proto MAX(TM) magnetic metal knuckle couplers Road-specific details of this WalthersProto replica include: A unit details - Nathan M5 Air horn w/all bells forward Whip-style radio antenna w/conduit Freight pilot Knob-style sand hatch doors Late water filler Cab wind deflectors Etched-metal cab sunshades Standard type winterization hatch Vertical body louvers Photo-etched Farr vertical grilles Dual headlights - upper single, lower twin vertical More Information Item # 920-42547 Brand WalthersProto Scale HO Engine Electronics DC, DCC & Sound Type EMD Diesel Road Name Chesapeake & Ohio Road Number 8009 & 8506 Estimated Release Date Summer 2024

Read more less

Great for railroads that preferred four-axle diesels for their passenger runs, prototypes for the WalthersProto EMD FP7 came equipped with more boiler water capacity on their stretched chassis. Providing enough steam to power train heat and some air conditioning systems on postwar trains taxed the standard water supply of standard EMD F7 A units set-up for passenger service, prompting EMD to roll out the new FP7 in 1949. Though outwardly similar to the F7A, FP7s were actually four feet longer to accommodate bigger water tanks with a capacity of 950 US gallons. Standard passenger power into the Amtrak era and beyond (with some also handling freight chores), these WalthersProto HO EMD FP7 replicas are fully assembled and ready for service with: One time run of these roadnumbers, order now - limited quantity available! Matches the prototypes' extended frame and body Available with ESU LokSound 5 Sound and DCC for DCC and DC layouts Railroad-specific details Five-pole, skew-wound, high-torque, high-efficiency can motor Helical gears with 14:1 ratio for smooth, ultra-quiet running Easy multiple-unit operation Correct RP-25 wheels Proto MAX(TM) magnetic metal knuckle couplers Road-specific details of this WalthersProto replica include: A unit details - Nathan M5 Air horn w/all bells forward Whip-style radio antenna w/conduit Freight pilot Knob-style sand hatch doors Late water filler Cab wind deflectors Etched-metal cab sunshades Standard type winterization hatch Vertical body louvers Photo-etched Farr vertical grilles Dual headlights - upper single, lower twin vertical More Information Item # 920-42549 Brand WalthersProto Scale HO Engine Electronics DC, DCC & Sound Type EMD Diesel Road Name Chesapeake & Ohio Road Number 8013 Estimated Release Date Summer 2024

Read more less

Great for railroads that preferred four-axle diesels for their passenger runs, prototypes for the WalthersProto EMD FP7 came equipped with more boiler water capacity on their stretched chassis. Providing enough steam to power train heat and some air conditioning systems on postwar trains taxed the standard water supply of standard EMD F7 A units set-up for passenger service, prompting EMD to roll out the new FP7 in 1949. Though outwardly similar to the F7A, FP7s were actually four feet longer to accommodate bigger water tanks with a capacity of 950 US gallons. Standard passenger power into the Amtrak era and beyond (with some also handling freight chores), these WalthersProto HO EMD FP7 replicas are fully assembled and ready for service with: One time run of these roadnumbers, order now - limited quantity available! Matches the prototypes' extended frame and body Available with ESU LokSound 5 Sound and DCC for DCC and DC layouts Railroad-specific details Five-pole, skew-wound, high-torque, high-efficiency can motor Helical gears with 14:1 ratio for smooth, ultra-quiet running Easy multiple-unit operation Correct RP-25 wheels Proto MAX(TM) magnetic metal knuckle couplers Road-specific features of this WalthersProto replica include: A Unit details - Nathan M3 air horn w/2 bells forward, one reverse Sinclair radio antenna Ditch lights Plain nose door Upper headlight Freight pilot Curved nose grab irons Horizontal body louvers and grilles Knob-style sand hatch covers Circular water filler Cab wind deflectors Extended standard-type winterization hatch More Information Item # 920- 42550 Brand WalthersProto Scale HO Engine Electronics DC, DCC & Sound Type EMD Diesel Road Name Canadian Pacific Road Number 4066 & 4474 Release Date Summer 2024

Read more less

Great for railroads that preferred four-axle diesels for their passenger runs, prototypes for the WalthersProto EMD FP7 came equipped with more boiler water capacity on their stretched chassis. Providing enough steam to power train heat and some air conditioning systems on postwar trains taxed the standard water supply of standard EMD F7 A units set-up for passenger service, prompting EMD to roll out the new FP7 in 1949. Though outwardly similar to the F7A, FP7s were actually four feet longer to accommodate bigger water tanks with a capacity of 950 US gallons. Standard passenger power into the Amtrak era and beyond (with some also handling freight chores), these WalthersProto HO EMD FP7 replicas are fully assembled and ready for service with: One time run of these roadnumbers, order now - limited quantity available! Matches the prototypes' extended frame and body Available with ESU LokSound 5 Sound and DCC for DCC and DC layouts Railroad-specific details Five-pole, skew-wound, high-torque, high-efficiency can motor Helical gears with 14:1 ratio for smooth, ultra-quiet running Easy multiple-unit operation Correct RP-25 wheels Proto MAX(TM) magnetic metal knuckle couplers Road-specific features of this WalthersProto replica include: A Unit details - Nathan M3 air horn w/2 bells forward, one reverse Sinclair radio antenna Ditch lights Plain nose door Upper headlight Freight pilot Curved nose grab irons Horizontal body louvers and grilles Knob-style sand hatch covers Circular water filler Cab wind deflectors Extended standard-type winterization hatch More Information Item # 920- 42551 Brand WalthersProto Scale HO Engine Electronics DC, DCC & Sound Type EMD Diesel Road Name Canadian Pacific Road Number 4070 & 4477 Release Date Summer 2024

Read more less

Great for railroads that preferred four-axle diesels for their passenger runs, prototypes for the WalthersProto EMD FP7 came equipped with more boiler water capacity on their stretched chassis. Providing enough steam to power train heat and some air conditioning systems on postwar trains taxed the standard water supply of standard EMD F7 A units set-up for passenger service, prompting EMD to roll out the new FP7 in 1949. Though outwardly similar to the F7A, FP7s were actually four feet longer to accommodate bigger water tanks with a capacity of 950 US gallons. Standard passenger power into the Amtrak era and beyond (with some also handling freight chores), these WalthersProto HO EMD FP7 replicas are fully assembled and ready for service with: One time run of these roadnumbers, order now - limited quantity available! Matches the prototypes' extended frame and body Available with ESU LokSound 5 Sound and DCC for DCC and DC layouts Railroad-specific details Five-pole, skew-wound, high-torque, high-efficiency can motor Helical gears with 14:1 ratio for smooth, ultra-quiet running Easy multiple-unit operation Correct RP-25 wheels Proto MAX(TM) magnetic metal knuckle couplers Road-specific features of this WalthersProto replica include: A Unit details - Nathan M3 air horn w/2 bells forward, one reverse Sinclair radio antenna Ditch lights Plain nose door Upper headlight Freight pilot Curved nose grab irons Horizontal body louvers and grilles Knob-style sand hatch covers Circular water filler Cab wind deflectors Extended standard-type winterization hatch More Information Item # 920- 42552 Brand WalthersProto Scale HO Engine Electronics DC, DCC & Sound Type EMD Diesel Road Name Canadian Pacific Road Number 4068 Release Date Summer 2024

Read more less

Great for railroads that preferred four-axle diesels for their passenger runs, prototypes for the WalthersProto EMD FP7 came equipped with more boiler water capacity on their stretched chassis. Providing enough steam to power train heat and some air conditioning systems on postwar trains taxed the standard water supply of standard EMD F7 A units set-up for passenger service, prompting EMD to roll out the new FP7 in 1949. Though outwardly similar to the F7A, FP7s were actually four feet longer to accommodate bigger water tanks with a capacity of 950 US gallons. Standard passenger power into the Amtrak era and beyond (with some also handling freight chores), these WalthersProto HO EMD FP7 replicas are fully assembled and ready for service with: One time run of these roadnumbers, order now - limited quantity available! Matches the prototypes' extended frame and body Available with ESU LokSound 5 Sound and DCC for DCC and DC layouts Railroad-specific details Five-pole, skew-wound, high-torque, high-efficiency can motor Helical gears with 14:1 ratio for smooth, ultra-quiet running Easy multiple-unit operation Correct RP-25 wheels Proto MAX(TM) magnetic metal knuckle couplers Road-specific features of this WalthersProto replica include: A Unit details - Nathan M3 air horn w/2 bells forward, one reverse Sinclair radio antenna Ditch lights Plain nose door Upper headlight Freight pilot Curved nose grab irons Horizontal body louvers and grilles Knob-style sand hatch covers Circular water filler Cab wind deflectors Extended standard-type winterization hatch More Information Item # 920- 42553 Brand WalthersProto Scale HO Engine Electronics DC, DCC & Sound Type EMD Diesel Road Name Canadian Pacific Road Number 4072 Release Date Summer 2024

Read more less

Great for railroads that preferred four-axle diesels for their passenger runs, prototypes for the WalthersProto EMD FP7 came equipped with more boiler water capacity on their stretched chassis. Providing enough steam to power train heat and some air conditioning systems on postwar trains taxed the standard water supply of standard EMD F7 A units set-up for passenger service, prompting EMD to roll out the new FP7 in 1949. Though outwardly similar to the F7A, FP7s were actually four feet longer to accommodate bigger water tanks with a capacity of 950 US gallons. Standard passenger power into the Amtrak era and beyond (with some also handling freight chores), these WalthersProto HO EMD FP7 replicas are fully assembled and ready for service with: One time run of these roadnumbers, order now - limited quantity available! Matches the prototypes' extended frame and body Available with ESU LokSound 5 Sound and DCC for DCC and DC layouts Railroad-specific details Five-pole, skew-wound, high-torque, high-efficiency can motor Helical gears with 14:1 ratio for smooth, ultra-quiet running Easy multiple-unit operation Correct RP-25 wheels Proto MAX(TM) magnetic metal knuckle couplers Finished in the later gray and red scheme, these HO WalthersProto replicas feature: Nathan M-5 air horn Whip-type radio antenna with conduit SP-style snowplow pilot Upper headlight with twin sealed-beam (operating) and red emergency (UDE) lights (nonworking) Working rear back-up light Frame-mounted equipment box Rooftop photo-etched icicle breakers front and rear The F7B features: Working back-up light on both endsLifting lugs on both endsPartial body skirt More Information Item # 920-42558 Brand WalthersProto Scale HO Engine Electronics DC, DCC & Sound Type EMD Diesel Road Name Southern Pacific(TM) Road Number 6446 & 8296 Estimated Release Date Summer 2024

Read more less

Great for railroads that preferred four-axle diesels for their passenger runs, prototypes for the WalthersProto EMD FP7 came equipped with more boiler water capacity on their stretched chassis. Providing enough steam to power train heat and some air conditioning systems on postwar trains taxed the standard water supply of standard EMD F7 A units set-up for passenger service, prompting EMD to roll out the new FP7 in 1949. Though outwardly similar to the F7A, FP7s were actually four feet longer to accommodate bigger water tanks with a capacity of 950 US gallons. Standard passenger power into the Amtrak era and beyond (with some also handling freight chores), these WalthersProto HO EMD FP7 replicas are fully assembled and ready for service with: One time run of these roadnumbers, order now - limited quantity available! Matches the prototypes' extended frame and body Available with ESU LokSound 5 Sound and DCC for DCC and DC layouts Railroad-specific details Five-pole, skew-wound, high-torque, high-efficiency can motor Helical gears with 14:1 ratio for smooth, ultra-quiet running Easy multiple-unit operation Correct RP-25 wheels Proto MAX(TM) magnetic metal knuckle couplers Finished in the later gray and red scheme, these HO WalthersProto replicas feature: Nathan M-5 air horn Whip-type radio antenna with conduit SP-style snowplow pilot Upper headlight with twin sealed-beam (operating) and red emergency (UDE) lights (nonworking) Working rear back-up light Frame-mounted equipment box Rooftop photo-etched icicle breakers front and rear The F7B features: Working back-up light on both endsLifting lugs on both endsPartial body skirt More Information Item # 920-42559 Brand WalthersProto Scale HO Engine Electronics DC, DCC & Sound Type EMD Diesel Road Name Southern Pacific(TM) Road Number 6450 & 8301 Estimated Release Date Summer 2024

Read more less

Great for railroads that preferred four-axle diesels for their passenger runs, prototypes for the WalthersProto EMD FP7 came equipped with more boiler water capacity on their stretched chassis. Providing enough steam to power train heat and some air conditioning systems on postwar trains taxed the standard water supply of standard EMD F7 A units set-up for passenger service, prompting EMD to roll out the new FP7 in 1949. Though outwardly similar to the F7A, FP7s were actually four feet longer to accommodate bigger water tanks with a capacity of 950 US gallons. Standard passenger power into the Amtrak era and beyond (with some also handling freight chores), these WalthersProto HO EMD FP7 replicas are fully assembled and ready for service with: One time run of these roadnumbers, order now - limited quantity available! Matches the prototypes' extended frame and body Available with ESU LokSound 5 Sound and DCC for DCC and DC layouts Railroad-specific details Five-pole, skew-wound, high-torque, high-efficiency can motor Helical gears with 14:1 ratio for smooth, ultra-quiet running Easy multiple-unit operation Correct RP-25 wheels Proto MAX(TM) magnetic metal knuckle couplers Finished in the later gray and red scheme, these HO WalthersProto replicas feature: Nathan M-5 air horn Whip-type radio antenna with conduit SP-style snowplow pilot Upper headlight with twin sealed-beam (operating) and red emergency (UDE) lights (nonworking) Working rear back-up light Frame-mounted equipment box Rooftop photo-etched icicle breakers front and rear The F7B features: Working back-up light on both endsLifting lugs on both endsPartial body skirt More Information Item # 920-42561 Brand WalthersProto Scale HO Engine Electronics DC, DCC & Sound Type EMD Diesel Road Name Southern Pacific(TM) Road Number 6457 Estimated Release Date Summer 2024

Read more less