This snap-together baffle kit is designed for use with SoundTraxx’s 28mm round speakers (P.N. STX810054 or STX810153).

Read more less

Easily adapt any SoundTraxx 21PNEM decoder to an NMRA 9-Pin DCC “quick plug” equipped model. This adapter can also be used with SoundTraxx 9-Pin JST power harness (STX810069) to create a universal-style decoder. Dimensions: 22.5 x 16 x 7.5mm Support for up to 8 functions Solder Pads for CurrentKeeper, speaker connections and extra lights

Read more less

The Digitrax UR93 Duplex Radio Transceiver is a multi-scale solution for model train enthusiasts. With its advanced technology and reliable performance, this transceiver allows for effortless control of multiple trains on a single layout. Enjoy the convenience and precision of a duplex radio system with the Digitrax UR93. UR93 Features: Digitrax Duplex Radio Transceiver on LocoNet wire infrastructure (no IR support). More than double the radio range of UR92 Duplex units. Improved multi-path performance for cluttered layouts. Plug and Play setup, PS14 Universal power supply included. Compatible to be mixed with UR92 LocoNet Duplex Radio systems, for added coverage and improved reception. Status LEDS. Supports combinations of DT602D/DE and DT500D, DT402D and UT4D Duplex Radio throttles. UR93E available for countries that require EN-300-328 Wireless conformity. More Information Item # UR93 Brand Digitrax MSRP $27.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Specification Sheet / Instruction Sheet

Read more less

Single 3/5/8 Amp AutoReversing DCC Booster (no command station capability) Up to 8 Amps of power total N, HO, & Large Scale Operations with Custom Voltage Trim LocoNet for easy plug ‘n play installation and system expansion Easy dip switch setup Auto resetting over temperature and short circuit protection Track status indicators Stabilized track drive output Over-voltage protected Auto-Shutdown when command control signal is lost to prevent “runaway” trains IPL updatable More Information Item # DB210 Brand Digitrax Scale Multi Scale MSRP 159.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet / Specification Sheet

Read more less

Maximize control and convenience with the Digitrax UR90X! Our LocoNet Infrared Receiver offers a 100% reliable connection and compatibility with multiple scales. Experience the power of this expertly designed product, utilizing the latest technology for seamless operation. Simplifies hookup, maintenance and troubleshooting of LocoNet. All connections plug-detachable. One RJ12 Throttle Jacks in front panel. IR and NET Indicator LEDs Two RJ12 LocoNet Jacks in rear for connection to other LocoNet devices.Use with 6 conductor telephone cable with RJ12 6-pin connectors and daisychain your LocoNet ports around the layout. “Power sharing” charge Circuitry for throttles connected to six UniversalPanels. (External 12V supply required for this optional DT602/UT6 chargingsource in sleep mode). More Information Item # UR90X Brand Digitrax Scale Multi Scale MSRP $55.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet

Read more less

The new ESU PowerPack Mini can be wired to all fourth and fifth generation ESU decoders. It reliably supplies energy to your locomotive when traversing dirty track or long turnout ladders. With its energy storage (1 Farad capacity) the unit supplies power to all light and motor functions as well as to the sound module. Subject to the energy consumption of your model it may continue to move for up to three seconds. The PowerPack Mini incorporates an integral charging circuit controlled by the decoder. Therefore it may be connected even during programming. In order to avoid an undue load on the booster in case there are several models in the same booster sector, the charging current is limited. The buffer time can be reduced by means of a CV. This may be useful to assure the correct stopping position ahead of signals showing the “Stop” aspect (red signal). Although it is considerably smaller than its predecessor, the space requirements of the PowerPack Mini of about 15.7 mm x 9.7 mm x 13 mm must be taken into account when installing this unit. A three-pole wire harness connects the PowerPack Mini to the decoder. The wires are already soldered to the PowerPack Mini and must be soldered to the appropriate solder pads of the decoder. More Information Item # 54671 Brand ESU Scale Multi WARNING: This product can expose you to a chemical, which is known to the State of California to cause Cancer and Reproductive Harm - For more information go to www.P65Warnings.ca.gov

Read more less

This snap-together baffle kit is designed for use with our 20mm round speakers (P.N. 810053).

Read more less

Sunny White LED for adding Hyperlight effects or as bulb replacements. 3mm (0.012") diameter 3.3 Volt

Read more less

As an industry leader in model train control, the Digitrax DB220 offers a powerful and versatile option for your layout. With dual 3/5/8 amp auto-reversing capability and compatibility across multiple scales, this booster provides reliable and efficient power distribution for your DCC system. Dual 3/5/8 Amp AutoReversing DCC Booster Up to 16 Amps of power total N, HO, & Large Scale Operations with Custom Voltage Trim LocoNet for easy plug ‘n play installation and system expansion Easy dip switch setup Auto resetting over temperature and short circuit protection Track status indicators Stabilized track drive output Over-voltage protected Auto-Shutdown when command control signal is lost to prevent “runaway” trains IPL updatable More Information Item # DB220 Brand Digitrax Scale Multi Scale MSRP $240.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet / Specification Sheet

Read more less

This Digitrax STAW Stow Away Throttle Holder is the perfect solution for storing and organizing your throttle controls. With its compact design and easy installation, it allows for efficient use of space and quick access to your throttles. Keep your workspace clutter-free and your throttles within reach with this 1 pack stow away holder. Bracket will hold: DT602, UT6 and other legacy Digitrax throttles. Access to LocoNet & Power Ports when stowed away. Stores throttle when not in use or when charging. Fascia mounted. Durable design. Easy to install. 90 Day Warranty On Materials & Workmanship Only. More Information Item # STAW Brand Digitrax Warranty No Worries Warranty (read more) MSRP $14.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet

Read more less