Perhaps you are familiar with this scenario: there is a digital decoder sitting on your workbench and you want to test it prior to a perhaps complex installation. But how to do this? The Profi Decoder tester makes it easy for you: simply connect the tester to your command station or the LokProgrammer. It enables you to test any decoder without exposing it to any external factors caused by the locomotive that may influence its performance. Features In order to make things as easy as possible for you, the Profi Decoder Tester is equipped with some useful features. It has all commonly used interface sockets for connecting a decoder for the smaller scale models: Besides a 6-pole NEM 651 socket and the 8-pole NEM 652 socket, it also has an 21MTC interface as per NEM 660, a PluX22 socket as well as a Next18 interface: No matter which type of decoder you have: Simply plug it in – it will fit! And that’s all there is to it! Decoders without any interface can be contacted with individual terminals.  A quality coreless motor with flywheel serves in conjunction with LEDs indicating the direction for checking the motor output: Thus it is quite easy to check on the low speed performance and the even speed of the decoder. An LED monitor informs you about the functioning of the headlights and back-up lights as well as the function outputs AUX1 through AUX6. For testing LokSound decoders we have integrated a 20 mm speaker. You may choose if the integral speaker should be switched off or if it should have 100 Ohm respectively 16 Ohm – thus the Decoder Tester is perfectly suitable for any ESU decoder generation! Two SUSI plugs facilitate the direct test of optional SUSI modules as well as the connection to another circuit board. The electrical connection to either the command station or the LokProgrammer is facilitated by a removable, 2-pole terminal block (same system as used on the LokProgrammer and the ECoS) or via two solder points. The dimensions of the ESU Decoder Tester are 99 x 74 x 34mm. WARNING: This product can expose you to a chemical, which is known to the State of California to cause Cancer and Reproductive Harm - For more information go to www.P65Warnings.ca.gov

Read more less

This snap-together baffle kit is designed for use with SoundTraxx’s 28mm round speakers (P.N. STX810054 or STX810153).

Read more less

Easily adapt any SoundTraxx 21PNEM decoder to an NMRA 9-Pin DCC “quick plug” equipped model. This adapter can also be used with SoundTraxx 9-Pin JST power harness (STX810069) to create a universal-style decoder. Dimensions: 22.5 x 16 x 7.5mm Support for up to 8 functions Solder Pads for CurrentKeeper, speaker connections and extra lights

Read more less

The Digitrax UR93 Duplex Radio Transceiver is a multi-scale solution for model train enthusiasts. With its advanced technology and reliable performance, this transceiver allows for effortless control of multiple trains on a single layout. Enjoy the convenience and precision of a duplex radio system with the Digitrax UR93. UR93 Features: Digitrax Duplex Radio Transceiver on LocoNet wire infrastructure (no IR support). More than double the radio range of UR92 Duplex units. Improved multi-path performance for cluttered layouts. Plug and Play setup, PS14 Universal power supply included. Compatible to be mixed with UR92 LocoNet Duplex Radio systems, for added coverage and improved reception. Status LEDS. Supports combinations of DT602D/DE and DT500D, DT402D and UT4D Duplex Radio throttles. UR93E available for countries that require EN-300-328 Wireless conformity. More Information Item # UR93 Brand Digitrax MSRP $27.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Specification Sheet / Instruction Sheet

Read more less

This adapter allows you to use our smallest decoder (The TSU-N18) in practically any n-scale model! Bring the TSU-N18's 6 functions plus a narrower profile to your models. The JST-Next18 Adapter features a Next18 socket to simply plug-in your TSU-N18 decoder and solder pads for additional functionality. Dimensions: 16 x 9.5 x 5mm. P.N. 810163. Dimensions: 16 x 9.5 x 5mm Function Outputs: 6 Max Function Current: 100mA (ea. Output) Compatible with:  SoundTraxx 884010 | Tsunami2 TSU-N18 Steam-2 Digital Sound Decoder SoundTraxx 885026 | Tsunami2 TSU-N18 EMD Diesel Digital Sound Decoder SoundTraxx 885027 | Tsunami2 TSU-N18 GE Diesel Digital Sound Decoder SoundTraxx 885028 | Tsunami2 TSU-N18 ALCO Diesel Digital Sound Decoder SoundTraxx 885029 | Tsunami2 TSU-N18 Baldwin & Other Diesel Digital Sound Decoder SoundTraxx 885030 | Tsunami2 TSU-N18 EMD-2 Diesel Digital Sound Decoder SoundTraxx 886007 | Tsunami2 TSU-N18 Electric Digital Sound Decoder

Read more less

This snap-together baffle kit is designed for use with our 20mm round speakers (P.N. 810053).

Read more less

Sunny White LED for adding Hyperlight effects or as bulb replacements. 3mm (0.012") diameter 3.3 Volt

Read more less

The LNWI allows you to connect compatible WiFi devices to LocoNet and run trains using compatible throttle apps. The apps available can be downloaded from this page. Wi-Fi interface to a Digitrax LocoNet for up to four compatible mobile Wi-Fi devices and Apps. Compatible with most Android and Apple devices running supported throttle apps Easy Setup and Configuration. A single LNWI works ‘out of the box’, with no additional configuration required. Up to 8 LNWI can be supported per LocoNet Multiple LNWI units automatically resolve SSID with no additional configuration Optional Wi-Fi WPA2 security for layout operations in public. Option switches to fully customize all device settings LocoNet Compatible More Information Item # LNWI Brand Digitrax MSRP $83.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Specification Sheet / Instruction Sheet

Read more less

Cool White LEDs for adding or using the Hyperlight lighting effects. Can be used as LED replacements or in place of bulbs (see your decoder manual). The cathode or minus (-) side is indicated by the ‘flag’ inside the LED, or by the shorter of the two leads.  Dimensions: 3mm (0.12”) diameterVoltage: 3.3 Volts

Read more less

Efficiently manage and detect occupancy and transponding in 4 sub-districts with Digitrax PM74. This power manager is perfect for multiple scales and ensures a smooth and reliable operation. Trust in its advanced capabilities for a seamless experience. 4 Power Manager sub-districts. Upgraded replacement for PM42, fully encased. Fully connectorized installation. Each Power sub-district / Detection Section (DS) supports Auto-reverse or Short circuit management. Each DS supports Occupancy detection. Each DS supports Transponding detection. Allows Mainline CV Read/Write program of compatible decoders. Remote LED status support. Series7 style advanced installation support using DT602. Replaces PM42 Quad Power Manager. More Information Item # PM74 Brand Digitrax Scale Multi Scale MSRP $109.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet

Read more less

Dual Stationary Decoder for Bi-polar, Snap Switches or Slow Motion Machines DS52 Features: Simple hook up and set up. Control 2 individual turnout machines.2 Slow motion turnout machines, such as Tortoise™ by Circuitron or Switchmaster™.OR2 Solenoid type turnout machines such as three wire Peco or Atlas Snap Switches or two wire bi-polar type turnout machines such as Kato Unitrack, AristoCraft, or LGB turnouts with powerful capacitive discharge capability. Turnout addresses can be set individually or in groups of 2. Screw terminals make installation easy! DCC compatible. Screw terminals make installation and set up easy. Control 2 solenoid type turnout machines: 2 wire bi-polar (Kato Unitrack Switches, etc.) and/or 3 wire (Peco, Atlas Snap Switches, etc.) Addresses can be independent or sequential All Scales up to 22V track power. More Information Item # DS52 Brand Digitrax Scale Multi Scale MSRP $28.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Specification Sheet / Instruction Sheet

Read more less

This snap-together baffle kit is designed for use with our 15mm round speakers (P.N. 810089).

Read more less