DCC Accessories
-
Digitrax Digitrax SMBK | Signal Mast Base Kit | Multi Scale
Includes 3 Signal Masts that can be used as Signal Mast Bases in any scale or can be painted and detailed and used as N-scale signal masts. More Information Item # SMBK Brand Digitrax MSRP $17.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet / Specification Sheet
$13.60
-
Digitrax Digitrax SN2AB | Mainline Signaling Kit | N Scale
N scale Mainline Signaling Kit including: 2 Single Head A Signals, 2 Single Head B Signals, 4 SMP1s, 8 spacers, 8 screws. Makes all of your signals plug ‘n play with small 10 pin connectors. Can be used as a basic N scale signal. Mounting board and hardware included. Current setting resistors are built in to the board. Easy mainline setup with A and B mast configurations. Pads are provided to make it easy to attach any signal to the mast base. This product is intended for use with the SE8C. The Digitrax Plug ‘N Play Signal Mast consists of a signal mast with one or two signal heads depending on mast configuration. Included with the kit are mounting boards and hardware that makes it easy to mount and connect the signal mast to the SE8C signal driver cable. This product is intended for use with the SE8C and other Digitrax signaling decoders. More Information Item # SN2AB Brand Digitrax MSRP $27.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet
$21.60
-
Digitrax Digitrax SNABC | Turnout Signaling Kit | N Scale
N scale Turnout Signaling Kit including: 1 Dual Head A Signal, 1 Single Head B Signal, 1 Single Head C Signal, 3 SMP1s, 6 spacers, 6 screws. Makes all of your signals plug ‘n play with small 10 pin connectors. Can be used as a basic N scale signal. Mounting board and hardware included. Current setting resistors are built in to the board. Easy plant setup with A, B, and C mast configurations. Pads are provided to make it easy to attach any signal to the mast base. This product is intended for use with the SE8C. The Digitrax Plug ‘N Play Signal Mast consists of a signal mast with one or two signal heads depending on mast configuration. Included with the kit are mounting boards and hardware that makes it easy to mount and connect the signal mast to the SE8C signal driver cable. This product is intended for use with the SE8C and other Digitrax signaling decoders. More Information Item # SNABC Brand Digitrax MSRP $27.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet
$21.60
-
Digitrax Digitrax SH2AB | Mainline Signaling Kit | HO Scale
HO scale Mainline Signaling Kit including: 2 Single Head A Signals, 2 Single Head B Signals, 4 SMP1s, 8 spacers, 8 screws. Makes all of your signals plug ‘n play with small 10 pin connectors. Can be used as a basic HO scale signal. Mounting board and hardware included. Current setting resistors are built in to the board. Easy mainline setup with A and B mast configurations. Pads are provided to make it easy to attach any signal to the mast base. This product is intended for use with the SE8C. The Digitrax Plug ‘N Play Signal Mast consists of a signal mast with one or two signal heads depending on mast configuration. Included with the kit are mounting boards and hardware that makes it easy to mount and connect the signal mast to the SE8C signal driver cable. This product is intended for use with the SE8C and other Digitrax signaling decoders. More Information Item # SH2AB Brand Digitrax MSRP $27.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet
$21.60
-
Digitrax Digitrax SHABC | Turnout Signaling Kit | HO Scale
HO scale Turnout Signaling Kit including: 1 Dual Head A Signal, 1 Single Head B Signal, 1 Single Head C Signal, 3 SMP1s, 6 spacers, 6 screws. Makes all of your signals plug ‘n play with small 10 pin connectors. Can be used as a basic HO scale signal. Mounting board and hardware included. Current setting resistors are built in to the board. Easy plant setup with A, B, and C mast configurations. Pads are provided to make it easy to attach any signal to the mast base. This product is intended for use with the SE8C. The Digitrax Plug ‘N Play Signal Mast consists of a signal mast with one or two signal heads depending on mast configuration. Included with the kit are mounting boards and hardware that makes it easy to mount and connect the signal mast to the SE8C signal driver cable. This product is intended for use with the SE8C and other Digitrax signaling decoders. More Information Item # SHABC Brand Digitrax MSRP $27.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet
$21.60
-
Digitrax Digitrax SMHK | Signal Mounting Hardware Kit
Under layout mounting hardware for Signal Driver Cables and their sockets. 6 metal signal straps and 6 signal spacers. These handy bits of hardware hold your signal plugs at just the right distance from the layout to make it easy to plug in your signals. More Information Item # PM74 Brand Digitrax Warranty No Worries Warranty (read more) MSRP $12.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet / Specification Sheet
$9.60
-
ESU LLC ESU 54672 | PowerPack Maxi for LokSound L V4.0, LokSound V4.0, LokSound 5 L and LokSound 5, LokPilot 5 and LokPilot 5 L 2x 5F/2.7V | Multi Scale
The new ESU PowerPack Maxi has been developed as the powerful complement to the LokSound L V4.0 / LokSound 5 L decoder. It can, of course, provided there is sufficient space, also be connected to all LokPilot V4.0, LokSound V4.0, LokSound V4.0 M4, LokPilot 5 or LokSound 5 decoders. It provides uninterrupted power to your locomotive when traversing dirty track and long turnout ladders. All sound, lighting and motor functions are buffered with the aid of two energy storage capacitors enabling your models – subject to the total energy consumption - to continue running for up to three seconds. The PowerPack Maxi incorporates an integral charging circuit controlled by the decoder. Therefore it may be connected even during programming. The charging current is limited in order to avoid an undue load on the booster, in case there are several models in the same booster sector. The buffer time can be reduced by means of a CV. This may be useful to assure the correct stopping position ahead of signals showing the “Stop” aspect (red signal). The space requirements of the PowerPack Maxi of about 27.5 mm x 15.7 mm x 13 mm must be taken into account when installing this unit. A three-pole wire harness connects the PowerPack Maxi to the decoder. The wires are already soldered to the PowerPack Maxi but must be soldered to the appropriate solder pads of the decoder. Please note that due to technical reasons the PowerPack cannot operate in analogue mode: Buffering is therefore not possible in analogue mode. More Information Item # 54672 Brand ESU Scale Multi WARNING: This product can expose you to a chemical, which is known to the State of California to cause Cancer and Reproductive Harm - For more information go to www.P65Warnings.ca.gov
$53.19
-
ESU LLC ESU 53901 | DCC Decoder Tester Extension for LokSound XL V4.0 | Multi Scale
If necessary, you can add the Decoder Tester Extension to your Profi Decoder Tester: Plugged into the side of the Decoder Tester it enables you to comfortably test all large scale decoders. If you also have to deal with large scale LokSound XL or LokSound L decoders in your workshop, the Profi Decoder Tester Extension is just the right thing for you: You can plug on LokSound XL decoders with multi-pin connectors as well as LokSound L decoders directly and easily test them. The extension module has multi-pin connectors for direct plug-on of the decoder types mentioned above. An LED monitor with 12 LEDs displays the status of all physical function outputs. You may also plug on a second speaker or sensor inputs onto the multi-pin connector for quick and easy testing. Up to four servos may also be plugged on for direct testing. Especially for the LokSound L, connecting pins for a smoke generator have also been added. The Profi Decoder Tester Extension represents the perfect test and programming bench in conjunction with the Profi Decoder Tester, where you can test and program almost all (ESU) decoders quickly and easily. WARNING: This product can expose you to a chemical, which is known to the State of California to cause Cancer and Reproductive Harm - For more information go to www.P65Warnings.ca.gov
$23.39
-
Ring Engineering Ring Engineering AM-2S | RailPro Accessory Controller Module with Sound
Much more powerful Audio Amplifier than AM-1S!Up to 13 Watts of Audio Power!The AM-2S is a module that you can install on your model train layout to control Accessory Projects. You can control a turntable, swing bridge, oil pumps, lights in buildings, and much more!!! You can use the RailPro Assistant Software to design custom screens for your HC-3 to control your accessories!!! The AM-2S can be controlled and setup by a Ring Engineering RailPro Controller, such as the HC-3 Handheld Controller. The AM-2S is not for use with turnouts. Please use TC-1 for turnout control. Features: Control motors Lights & light effects Play custom loaded sounds! Size: 4.60 x 3.00 x 1.18 inches Important Note: The AM-2S hardware has 8 outputs that can be software controlled for 4 motor outputs or 8 sourcing outputs. It also has another 8 I/O that can be configured for 8 inputs or 8 sinking outputs. Currently there is only one software configuration available for the module (2 motor outputs, 4 sourcing outputs, and 8 inputs). We may offer more software configurations in the future.
$80.99
-
SoundTraxx SoundTraxx 810139 | 40 x 28.5mm Speaker Gasket Kit
Package of four gaskets for mounting our 40 x 28.5mm oval speakers (P.N. 810078).
$6.36
-
SoundTraxx SoundTraxx 829002 | PTB-100 Programming Track Booster
The PTB-100 Programming Track Booster is a handy tool for anyone who uses DCC! This device facilitates programming as well as gives some comforting feedback during the programming process. You will instantly know if your decoder has received the programming instruction (or not!) by way of indicator lights on the circuit board. So why might you want (or need) a PTB-100? Certain command stations allow you to read a CV during Service Mode programming, which is useful to verify its current setting. Sometimes trouble reading or verifying CVs may be due to the design of the command station and the decoder itself. All decoders communicate back to the command station using what’s called an acknowledgement pulse, which is defined in NMRA RP-9.2.3 as “an increased load on the programming track of at least 60mA for at least 5ms.” Like most decoders, SoundTraxx Digital Sound Decoders generate the acknowledgment pulse by momentarily applying power to the motor. If the decoder is otherwise working properly (i.e., responds properly on the mainline to speed and direction commands), but the command station is having trouble reading CV data from the decoder, it may be due to incompatibilities between the electrical requirements of the sound decoder (which are different from conventional decoders due to the added audio circuitry) and the electrical characteristics of the programming track. In this case, you will need to use a programming track booster, such as the PTB-100. The PTB-100 amplifies the programming track signals to levels that work best with SoundTraxx Sound Decoders. It is easy to install and inexpensive. An advantage to using the PTB-100 is that it also provides short circuit detection and some helpful diagnostics. The PTB-100 is neither needed nor recommended for use with the Zimo MX1 or the Lenz LVZ100.
$58.36
-
Digitrax Digitrax PS615 | 90W AC/DC 15VDC 6 Amp Power Supply
Power your model train setup with the Digitrax PS615, a high-efficiency power supply designed to meet the demands of your Digitrax Command Stations and Boosters. This robust power supply ensures your layout operates smoothly and reliably, making it an essential component for both hobbyists and professionals. Key Features: High-Efficiency Power Supply: The PS615 delivers 90W of power with a 15V DC output at 6 amps, providing ample power for your Digitrax Command Stations and Boosters. Universal AC Input: With an input range of 100-240V AC at 50/60Hz, the PS615 can be used worldwide, making it a versatile choice for model train enthusiasts everywhere. Compact and Lightweight: The PS615’s compact design ensures it fits neatly into your setup without taking up too much space. Its lightweight construction makes it easy to handle and install. Safety and Compliance: Meets MEPS VI and DOE VI efficiency standards, and is CE, UL, and FCC certified for electromagnetic compatibility and safety1. The power supply also features full galvanic isolation of output voltage from AC input, ensuring stability and protection. Environmentally Friendly: Manufactured with RoHS environmentally sensitive processes, the PS615 is designed with sustainability in mind. Power Indicator Light: A convenient power indicator light lets you know when the adapter is on and functioning correctly. Overcurrent and Overload Protection: Built-in protections ensure the safety and longevity of your equipment by preventing damage from power surges and overloads. Why Choose the Digitrax PS615? The Digitrax PS615 is not just a power supply; it’s a reliable solution for powering your model train accessories. Whether you’re a hobbyist looking to enhance your setup or a professional seeking dependable components, the PS615 offers the perfect balance of performance, versatility, and ease of use. Applications: Model Train Layouts: Ideal for powering Digitrax Command Stations and Boosters, ensuring your model train layout operates smoothly. DIY Projects: Suitable for various DIY electronics projects that require a stable 15V DC power supply. Custom Installations: Perfect for custom model train installations where reliable power is essential. Specifications: Output Voltage: 15V DC Current Rating: 6 amps Power Output: 90W Input Voltage: 100-240V AC, 50/60Hz Certifications: CE, UL, FCC Weight: Lightweight and compact design Enhance Your Model Train Experience Upgrade your model train setup with the Digitrax PS615 90W AC/DC 15VDC 6 Amp Power Supply. Its reliable performance, versatile compatibility, and user-friendly design make it the perfect choice for anyone looking to power their Digitrax accessories efficiently. More Information Item # PS615 Brand Digitrax MSRP $79.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Specification Sheet
$57.19
