Featured

The SoundTraxx 885022 is a TSU-2200 Tsunami2 2-amp DCC sound decoder carrying the EMD-2 diesel sound set. EMD-2 is SoundTraxx's second collection of EMD prime movers, covering the 567, 645 and 710 variants that the standard EMD profile leaves out. If you model a GP9, SD9, GP39, SD45, GP60, SD70MAC or any of the other locomotives listed below, this is the sound set built for it. Tsunami2 combines a full sound system, Hyperdrive2 motor control, Hyperlight lighting effects and a DCC decoder on one board. A 32-bit processor drives 28 functions and 16 polyphonic sound channels, so the prime mover, horn, bell and brake squeal all play at once without cutting each other off. Dynamic Digital Exhaust reads the load on the motor and notches engine RPM up and down on its own, so pulling a heavy train upgrade actually sounds like work. This is a universal, hardwire-style decoder measuring 35 x 18 x 6mm, sized for a wide range of HO and S scale diesels. Which Locomotives Does the EMD-2 Sound Set Cover? The 885022 carries eight selectable EMD prime movers. Pick the one that matches your locomotive with a single CV change. Locomotive assignments below follow SoundTraxx's own diesel sound selection reference. EMD 567, 12-cylinder, no transition NW2, NW3, NW5, SW7, SW9, SW1200 EMD 567C, 16-cylinder, non-turbo F9, FP9, GP9, SD9 EMD 645E, 12-cylinder, non-turbo GP15-1, GP15AC, SW1500, SW1504, MP15AC, MP15DC EMD 645E, 12-cylinder, turbo GP39, GP39-2, SD39, SDL39 EMD 645F, 16-cylinder, turbo GP40X, GP50, SD40X, SD50 EMD 645E, 20-cylinder, turbo F45, FP45, SD45, SD45X, SD45-2, SDP45, SD45T-2 EMD 710G, 12-cylinder F59PH, F59PHI, GP59 EMD 710G, 16-cylinder GP60, GP60M, GP60B, SD60, SD60M, SD60I, SD60F, SD70, SD70M, SD70I, SD70ACU, SD70MAC, SD70M-2, SD75I, SD75M Features Eight EMD-2 prime movers selectable by CV, covering the 567, 645 and 710 engines listed above Over 40 selectable air horns, plus bells, air compressors, couplers and dynamos, for more than 50 individual sound effects Dynamic Digital Exhaust (DDE) matches exhaust volume and engine RPM to the load on the motor automatically Three braking types: independent, train and dynamic braking, each with variable load sound Hyperdrive2 motor control for smooth creep-speed switching and prototypical momentum Over 20 Hyperlight lighting effects spread across six function outputs 16 polyphonic sound channels so horn, bell and prime mover never cut each other off CurrentKeeper ready with an onboard quick-plug connector for the SoundTraxx 810140 2-watt audio amplifier into an 8-ohm load, enough for a full-size HO speaker Specifications Item Number: SoundTraxx 885022 UPC: 812165023257 Decoder Model: TSU-2200 Tsunami2 Sound Profile: EMD-2 Diesel Scale: HO to S scale Connection Type: Universal hardwire Decoder Size: 35 x 18 x 6mm Max. Motor Stall Current: 2A Max. Function Current: 100mA (each output) Function Outputs: 6 Audio Amplifier: 2 Watt, 8-Ohm Load DCC Track Voltage: 7.5V to 22V Sound Channels: 16 polyphonic Processor: 32-bit, 28 functions Brand: SoundTraxx Frequently Asked Questions What is the difference between the EMD and EMD-2 sound sets?Both cover EMD diesels. The original EMD profile carries the most common prime movers, such as the 567 non-turbo in F-units and early Geeps and the 645 turbo in the SD40-2 and SD45. EMD-2 carries a second group of engines, including the 567C in the GP9 and SD9, the 645E 20-cylinder in the SD45 family and the 710G 16-cylinder in the SD60 and SD70 series. Check the coverage table above for your locomotive. If it is not listed there, the 885005 EMD profile is the one you want. Will this fit my locomotive?The TSU-2200 is a universal hardwire decoder measuring 35 x 18 x 6mm, intended for HO and S scale diesels. It is not a drop-in board replacement. You wire it to the motor, pickups, lights and speaker. If your locomotive has a decoder plug, look at the TSU-PNP8 or TSU-21PNEM8 versions of the same sound set instead. Is a speaker included?No. The onboard amplifier is rated 2 watts into an 8-ohm load, so choose any 8-ohm speaker that fits your shell from our DCC speakers range. What does the 2-amp rating mean?It is the maximum motor stall current the decoder can handle. Two amps covers virtually every HO diesel, including twin-motor units. Smaller single-motor installs can also use the 1-amp TSU-1100 version. Do I need a CurrentKeeper?It is optional and well worth it. The 810140 CurrentKeeper is a capacitor pack that carries the decoder across dirty track, frogs and turnouts so the sound does not reset. This decoder has the quick-plug connector for it built in. Does it work on a DC layout?Yes. Tsunami2 runs on analog DC out of the box, though sound and lighting features are limited compared with DCC operation. Full function control needs a DCC system. How do I select a different prime mover?Each engine in the coverage table is chosen with a single CV setting, documented in the Tsunami2 diesel user guide included with the decoder. You can change it as often as you like, so one decoder can be re-tasked if you sell or re-motor the locomotive. Explore More Browse the full SoundTraxx range, compare every DCC decoder we stock, or see the other EMD-2 sound profile decoders, including the 4-amp TSU-4400 for larger installs and the TSU-N18 for N scale. You will also need a speaker, so browse our DCC speakers, and most installs go easier with parts from DCC wiring. Add a SoundTraxx 810140 CurrentKeeper to keep sound alive over dirty track and turnouts.

Read more less

Woodland Scenics 621 Static Grass in Dark Green 7mm gives your layout the look of mature, overgrown summer fields and tall meadow grass that towers over your scene. The deep green tone is the workhorse color for late-spring through summer ground cover, and the 7mm fibers stand straight up when applied with a static grass applicator for a realistic windblown look. Looking for more scenery and ground cover? Browse our Scenery collection and Track Tools & Accessories for static grass applicators and matching shades. Features 7mm (1/4") fiber length — reads as tall, unkempt grass in HO, S, and O scales, or as thick brush-like vegetation in N and Z scales. Dark Green shade represents mature, deep-toned summer grass and works beautifully blended with lighter greens and burnt tones for natural variation. 42 grams per shaker bottle — enough material to cover a substantial area when applied properly. Stands upright when applied with the Woodland Scenics Static King or any compatible static grass applicator. Part of the Woodland Scenics Field System — fully compatible with their other static grass colors and lengths for blending. Scale: Multi-scale (works in N, HO, S, O, Z). More Information Brand Woodland Scenics Item Number FS621 Color Dark Green Fiber Length 7mm (1/4") Net Weight 42 grams Scale Multi-scale (N, HO, S, O, Z) Product Type Static Grass / Ground Cover System Woodland Scenics Field System Condition New UPC 724771006213 FAQ What scale is this static grass for?It's multi-scale. The 7mm fiber length reads as tall, unmowed grass in HO, S, and O, and as brush-like vegetation or weed clumps in N and Z. Pick a shorter length (2mm or 4mm) for a manicured-lawn look in HO. Do I need a static grass applicator to use this?For the upright "growing" effect that makes static grass so realistic, yes — you need a static grass applicator like the Woodland Scenics Static King. You can still sprinkle the fibers onto wet glue without an applicator, but they'll lay flat rather than stand up. Can I blend this with other Woodland Scenics static grass colors?Absolutely — blending is the trick to a natural look. Pair Dark Green 7mm with Medium Green (FS622), Light Green (FS623), Harvest Gold (FS624), or Burnt Grass (FS625) for variation that matches real fields and meadows. How much area does one bottle cover?Coverage depends on application density, but the 42g bottle realistically covers several square feet of layout when applied at typical density. For large open fields, plan on more than one bottle.

Read more less

Broadway Limited's HO scale EMD GP30 brings Southern Pacific's iconic "Bloody Nose" #5012 to your layout, rendered with road-specific detailing and the all-new Paragon4 sound and DCC system. The GP30 was EMD's response to GE's U25B and a turning point in the second-generation diesel race — 948 were built between 1961 and 1963, and SP rostered them as core mainline power for decades. With Rolling Thunder bass, GoPack capacitor packs, and individually controllable lighting, this is a layout-ready locomotive that runs as good as it looks. Looking for more HO Scale locomotives? Browse our HO Trains & Track and HO Track & Accessories. Features Flywheel-equipped drive with all-wheel pickup and a die-cast chassis for smooth, heavy pulling power Individually controllable headlight, rear light, front and rear numberboard lights, classification lights, cab light, and Mars light Paragon4 Sound/DC/DCC with Rolling Thunder, integral GoPack capacitor pack, recordable DCC operation, and Pro Lighting Mode Metal Kadee-compatible couplers (qty 2) and 18" minimum operating radius — runs on Code 70, 83, and 100 rail Road-specific Southern Pacific Bloody Nose paint and details: handrails, grab irons, horn, bell, wipers, and etched metal grills Scale: HO (1:87) More Information Brand Broadway Limited Imports Item Number 9141 Scale HO (1:87) Road Name Southern Pacific (Bloody Nose) Road Number 5012 Locomotive Type Diesel (EMD GP30) DCC DCC Sound Equipped (Paragon4 Dual-Mode DC/DCC) Era Transition Era / Modern (1961–present) Minimum Curve Radius 18" Couplers Metal Kadee-compatible (qty 2) Condition New FAQ Will it run on a DC layout right out of the box?Yes. Paragon4 is a true dual-mode decoder — you can run it on standard analog DC or on any DCC system without any changes. Does the sound work in DC mode?Yes. The integral GoPack capacitor pack keeps audio playing reliably even on dirty track or through dead spots, in both DC and DCC. What's "Rolling Thunder"?It's Broadway Limited's accessory subwoofer system that adds prototype-level low bass to the locomotive's prime mover sound. The GP30's onboard speaker handles full audio on its own; Rolling Thunder is optional. What era is this Southern Pacific scheme correct for?The "Bloody Nose" scarlet-and-gray scheme appeared in 1958 and ran through the SP merger in 1996, so this engine fits any 1960s-through-mid-1990s SP layout.

Read more less

Experience classic Northern Pacific power with the Rivarossi GE U25C Phase IIIb #2529, equipped with a factory-installed ESU LokSound 5 DCC sound decoder. This HO scale model captures GE's first 6-axle road diesel with realistic sound, road-specific lighting and details, and Rivarossi's heavy die-cast drive. Looking for more? Browse our HO Scale Locomotives and HO Scale Rolling Stock. Features Factory-installed ESU LokSound 5 DCC decoder for sound, lighting and motor control. Heavy die-cast chassis and 5-pole motor with flywheels for smooth, stable performance. Authentic Northern Pacific black-and-yellow scheme with sharp road-specific lettering. High level of separately applied details, metal handrails, and rotating truck bearing covers. NMRA RP-25 metal wheels, NEM coupler pockets, and metal knuckle couplers. Officially licensed and developed with the cooperation of General Electric. Scale: HO Scale (1:87) More Information Brand Rivarossi Item Number HR2886S / 635-HR2886S Prototype GE U25C Phase IIIb Diesel-Electric Locomotive Roadname Northern Pacific #2529 Scale HO Scale (1:87) Control DCC with ESU LokSound 5 sound Couplers / Wheels Metal knuckle couplers, RP-25 metal wheels UPC/EAN 5063129008468 Made In Italy Condition New FAQ Does it have sound?Yes — an ESU LokSound 5 DCC sound decoder is factory-installed, with prototypical GE diesel sounds, lights and motor control. Will it run on DC?Yes, LokSound 5 decoders support analog DC operation, though full sound and lighting control requires a DCC system. What was the GE U25C?Introduced 1963–1965, the U25C was GE's first 6-axle road diesel — 113 were built, and Northern Pacific rostered them in the classic black-and-yellow scheme modeled here. What couplers does it use?Metal knuckle couplers in NEM pockets, compatible with standard HO knuckle couplers.

Read more less

Power your HO railroad's flagship streamliners with these superb replicas of EMD's famed E8 and E9 diesels. Introduced in 1948 with the new 567B prime mover, production contiued until 1954 when the virtually identical E9 was introduced with the more powerful 567C prime mover. Powerful, reliable and economical, EMD E units handled premiere long-distance trains for decades, with many ending their long careers in commuter service and ocassionally handling fast freight trains. Fully assembled and ready for service, features include: One time run of these roadnumbers, order now - limited quantity available! Available with LokSound 5 for DCC or DC layouts Road- and era-specific details Both units powered - matching individual A units available separately Rugged and reliable WalthersProto drive 21-pin DCC plug Formed wire grab irons and handrails Photo-etched lift rings Cab interior w/seats and figures All-wheel drive and electrical pickup Constant and directional LED lights Correct size RP-25 metal wheels Proto MAX(TM) metal knuckle couplers  Road-specific features of this WalthersProto replica include: Nathan five-chime (all forward) air horn Single horizontal sealed-beam headlight Working backup light Flush number boards Removed skirts Freight pilot Southern-style MU bracket 4-hose MU set at left and right Photo-etched E8A-style Farr air grilles Dynamic brake with 48" fan Winterization hatches w/levers Single offset steam generator Rooftop air reservoirs w/piping Round spark arrestors Rectangular air vent Roller bearing sideframes Wheel slip hubs Speed recorder Southern-style left and right water tanks More Information Item # 920-42920 Brand WalthersProto Scale HO Engine Electronics DC, DCC & Sound Type EMD Diesel Road Name Southern Road Number 6902 & 6910

Read more less

Titans of Steel is Walthers' railroad trading card series, and this pack is the America250 edition: 25 cards curated around the moments that shaped North American railroading, released under an officially licensed America250 partnership marking the semiquincentennial. Each card carries a high-resolution image of a classic locomotive, passenger train, landmark or other railroad subject, with facts and historical context on the back. They work as a collection, as a trading set, as something to hand a kid who has just discovered trains, or as a small gift for someone who already knows all of it. Specifications Brand Walthers Collectibles Item Number 900-2001 UPC 616374236169 Series Titans of Steel, America250 edition Contents 25 collectible trading cards Edition Limited Scale Not applicable, these are trading cards Condition New, factory sealed Features Officially licensed America250 partnership 25 limited edition Titans of Steel collectible cards Subjects curated around pivotal moments in railroad history High-resolution photography of locomotives, passenger trains and rail landmarks Facts and historical context printed on every card Suits collecting, trading, teaching or display More in This Series 900-9001 Titans of Steel Series One, 10-Card Pack Frequently Asked Questions How many cards are in the pack?Twenty-five, all from the America250 edition. Is this the same as the Series One pack?No. Series One is a 10-card pack with a rare and a wildcard included. This is the 25-card America250 edition, a separate release with its own curated subjects. Do I need to be a model railroader?Not at all. They stand on their own as railroad history, and they make an easy gift for anyone who likes trains. Are the cards randomised?No. This is a fixed 25-card pack, so you know what you are getting. Explore More Browse more gift ideas and the rest of our catalogue.

Read more less

The SoundTraxx 885610 is a BLU-21PNEM8 Blunami digital sound decoder with the GE sound set. Blunami is a Tsunami2 with a Bluetooth radio added, so it runs three ways: as a normal DCC decoder on any NMRA-compliant system, on plain DC, or in wireless mode straight from your phone or tablet. Wireless mode needs no command station and no programming track — an old DC power pack and the free Blunami app are enough, and CVs can be read and changed over Bluetooth while the locomotive is running. The app is free for iOS and Android. This version is the 21-pin MTC plug-in Blunami, suited to HO scale and larger. Features 8 GE prime movers: GE FDL-12, GE FDL-16, GE 7FDL-16, GE Dual FDL-16, GE GEVO G12, GE 44-Ton Center Cab Dual Caterpillar, GE Cummins Switcher, GEVO G12 Tier 4 Over 40 air horns and 13 bells, plus air compressors, couplers and dynamos Bluetooth control from the free Blunami app (iOS and Android) — over 300 settings without editing a single CV by hand Dynamic Digital Exhaust (DDE) automatically matches exhaust volume and RPM to the load on the motor, and the app calibrates it for you Three braking types: independent, train and dynamic braking Hyperdrive2 motor control for smooth, creep-speed switching Over 20 Hyperlight lighting effects across 8 function outputs 16 polyphonic sound channels on a 32-bit processor, with a 7-band equalizer and adjustable reverb CurrentKeeper ready — works with the SoundTraxx 810140 CurrentKeeper More Information Item Number: SoundTraxx 885610 Model: BLU-21PNEM8 Blunami Sound Set: GE Diesel Scale: HO scale and larger Decoder Size: 30.5 x 15.5 x 6.5mm Connection: NEM660 21MTC integral connector Max. Motor Stall Current: 1A Function Outputs: 8 Audio Amplifier: 2 Watt, 8-Ohm Load Sound Channels: 16 polyphonic Processor: 32-bit, 28 functions Control Modes: DC, DCC and Bluetooth wireless Shop the full SoundTraxx range, compare every DCC decoder we stock, or see the other GE sound profile decoders. A speaker is not included — browse DCC speakers rated 2 watt or better, and find install parts in DCC wiring. Add a SoundTraxx 810140 CurrentKeeper to keep sound alive over dirty track and turnouts. FAQ Do I need a DCC system to use this?No. That is the point of Blunami. It runs on a plain DC power pack with no command station at all — you control it from the free Blunami app over Bluetooth. It is also a fully NMRA-compliant DCC decoder if you already run DCC. Does the app work on Android?Yes. The free Blunami app is published for both iOS and Android. (Some older listings and dealer pages still say iOS only — that is out of date.) Is a speaker included?No. Pair it with an 8-ohm speaker rated 2 watt or better that fits your shell. Which prime movers do I get?All 8 listed above, selectable in the app or via CV 123. You are not locked to one engine sound — pick whichever matches your prototype. Will it fit my locomotive?This one measures 30.5 x 15.5 x 6.5mm and connects by nem660 21mtc integral connector. Check the space in your shell against that footprint before ordering — other Blunami versions use different connectors and sizes.

Read more less

The SoundTraxx CurrentKeeperIII is the smallest keep-alive module SoundTraxx has ever built — a compact 470µF power-backup that keeps your DCC locomotive running smoothly through brief power interruptions caused by dirty track, insulated frogs, or a momentary loss of electrical pickup. At just 10.1 x 6.8 x 4.2mm, it slips into the tightest installations where a full-size CurrentKeeper simply will not fit. Wired to a compatible sound or motor decoder, the CurrentKeeperIII stores enough energy to bridge short power dropouts (typically about 0.5 to 0.75 seconds), smoothing out flickering lights, stuttering motors, and interrupted sound during normal operation. It works in any scale, so it is at home in HO, N, O and beyond wherever space is at a premium. Looking for more DCC components? Browse our DCC Accessories, DCC Decoders, and the full SoundTraxx lineup. Features SoundTraxx's smallest CurrentKeeper yet — measures just 10.1 x 6.8 x 4.2mm for tight installs. 470µF capacity provides dependable short-term backup power during brief electrical interruptions. Typical hold time of approximately 0.5 to 0.75 seconds, depending on the locomotive, decoder, motor load and lighting. Bridges power loss from dirty track, insulated frogs and momentary pickup dropouts for smoother, more reliable running. Compatible with NMRA DCC Standards & Recommended Practices. Works in any scale — HO, N, O, S, G and Z. More Information Brand SoundTraxx Item Number 810164 Product Type CurrentKeeper / Keep-Alive Module Capacitance 470µF Dimensions 10.1 x 6.8 x 4.2mm Input Rating 16V or less; 100mA Scale All Scales (Multi Scale) Standards NMRA DCC Compatible Condition New FAQ What does a CurrentKeeper actually do?It is a keep-alive device. It stores electrical energy and feeds it back to your decoder when the wheels momentarily lose contact with the rails, so your locomotive keeps moving and its lights and sound stay on instead of cutting out. How is the CurrentKeeperIII different from the CurrentKeeper and CurrentKeeperII?The CurrentKeeperIII is SoundTraxx's most compact version at just 10.1 x 6.8 x 4.2mm. With a 470µF capacity it delivers a shorter hold time (about 0.5 to 0.75 seconds) than the larger units, making it ideal for small locomotives and tight installs where the full-size CurrentKeepers will not fit. Will it work with my decoder?The CurrentKeeperIII follows NMRA DCC Standards & Recommended Practices and works with decoders that provide a keep-alive / energy-storage connection. Check your decoder's documentation for the correct hookup points. What scales does it work in?Any scale. Because it is an electronic module, the CurrentKeeperIII can be installed in HO, N, O, S, G or Z locomotives wherever there is room for it. More Information Browse all DCC speakers and DCC wiring, shop the full SoundTraxx range, or pick a decoder from our DCC decoders.

Read more less