Use to light street corners, residential walkways, parks and more. 20mA set Dimensions - 0.339" w x 3.752" h (8.6 mm w x 95.3 mm h) RoHS Compliant

Read more less

2 lights with 24" (60.9 cm) cable/pkg - 30mA each

Read more less

Cool White LED Nano Lights 20mA Includes 24" cables 2 lights per package Ready to plug into Light Hub (sold separately) INSTRUCTIONS: Light Blue plastic band (1/2”) identifies Cool White light. Secure light with super glue or tape. To install in an object, measure Nano. Drill slightly larger hole. Feed Nano through hole and secure. Insert Plug into LIGHT Port on a Light Hub (JP5700, JP5701), Sequencing Light Hub (JP5680) or Port Sharing Device (JP5681) until locking tabs click into place.

Read more less

Orange LED Nano Lights 20mA Includes 24" cables 2 lights per package Ready to plug into Light Hub (sold separately) INSTRUCTIONS: Align locking tabs on Light Plug with front of Light Hub (JP5700, JP5701) and insert into LIGHT Port until locking tabs click into place. Glue or tape Light in place, as required. Orange plastic band (1/2") on cable identifies Orange light.

Read more less

The product features a United States flag high on a flag pole. The pole is topped with a ball-style finial and includes a rope and cleat. US Flags include a Just Plug Spotlight to highlight the Flag. Spotlight is designed and ready to plug into the Just Plug Light Hub. Flag Pole measurement: 7.48" (190 mm) H Flag measurement: 2.4" W x 1.49" H (61 mm x 38 mm) Kit includes: 1 Large Flag Pole with Flag 1 Large Spotlight with 36 in (91 cm) wire 1 Linker Plug

Read more less

The Suspended Flashing Traffic Lights are perfect for rural areas where a flashing yellow warning signal is needed to caution traffic. They are ready to place right out of the package. They're hand-painted and authentically weathered. The Traffic Lights are pre-wired and made for use with the Just Plug® Lighting System. 2 Suspended Flashing Traffic Lights (yellow) each with 69 in (175 cm) wire 2 Flashing Linker Plugs Yellow light flashes on all four sides. One package includes two flashing yellow signals. RoHS Compliant

Read more less

15 pack of Peel. Stick. 'n Light.  Easy to install & ready to use! 12 to 16 volts Use an AC or DC power supply or batteries Lights are connected to 11 inch wire Each light contains two-sided tape to allow attachment to a flat surface Great for Dollhouses, Train layouts, Buildings, Models & more!

Read more less

15 pack of LED Peel. Stick. 'n Light. LED lights with resistors. Easy to install & ready to use! 12 to 16 volts Use an AC or DC power supply or batteries Lights are connected to 11 inch wire Each light contains two-sided tape to allow attachment to a flat surface Great for Dollhouses, Train layouts, Buildings, Models & more!

Read more less

Show off your patriotism with Old Glory waving in the wind. US Flag - Wall Mounts are available in three sizes and work for multiple scales. They feature a United States flag hanging from a metal pole and a mounting bracket. Display your flag outside your home, church, small business, or on the buildings down Main Street. US Flags include a Just Plug Spotlight to highlight the Flag.

Read more less

Show off your patriotism with Old Glory waving in the wind. US Flag - Wall Mounts are available in three sizes and work for multiple scales. They feature a United States flag hanging from a metal pole and a mounting bracket. Display your flag outside your home, church, small business, or on the buildings down Main Street. US Flags include a Just Plug Spotlight to highlight the Flag.

Read more less

The LokSound by ESU LED Interior Lighting Strips are perfect for lighting HO and N Scale passenger car interiors operating on DCC layouts. They're designed for use only on track power (electrical wipers and accessories available separately). Offered with warm white (397-50708) or yellow (397-50709) LEDs they allow you to match your lighting color to your modeling era. The strips include a small potentiometer so you can adjust the brightness. For shorter cars or cabooses the strips can be cut. The red marker LEDs are on wire leads for easy placement where needed. The integral ESU decoder supports both Motorola(R) and DCC, and also works on DC analogue layouts. The operating mode is detected automatically. In addition to the basic maximum brightness adjusted with the control knob on the lighting strip, brightness may be further adjusted by means of the software. Various prototypical lighting effects such as soft dimming, fluorescent lamp effect, faulty fluorescent lamp, battery powered lighting and many others provide realistic results. The 11 LEDs are wired in several groups, which can be switched separately. Function mapping allows you to assign the LEDs to the function button of your choice. Two additional outputs may be used for the red end-of-train lights or for directional lighting in a cab control car. All effects can also be programmed once the lighting strip has been installed and the values of your DCC LED Interior Lighting Strips can be read on a programming track. Warm White 10 x 11/32" or 25.5 x .9cm More Information Item # 50708 Brand ESU Scale O, HO, TT, N Pack Size 1 MSRP $29.99 WARNING: This product can expose you to a chemical, which is known to the State of California to cause Cancer and Reproductive Harm - For more information go to www.P65Warnings.ca.gov

Read more less

Green LED Stick-On Lights 25mA Includes 24" cables 2 lights per package Ready to plug into Light Hub (sold separately) INSTRUCTIONS: Align locking tabs on Light Plug with front of Light Hub (JP5700, JP5701) and insert into LIGHT Port until locking tabs click into place. Remove release paper from back of Light and stick on where desired. Green plastic band (1") on cable identifies Green light.

Read more less