$0.00 Pre-Order | Estimated delivery Summer 2023 Chances are your new mini-van, light truck, SUV or crossover took it's first long trip by train aboard a Bi-Level Autorack like this WalthersProto replica! Introduced in the late 1970s as demand for pick ups and similar vehicles increased, these 89' 6" (27.2m) flatcars were fitted with racks with just two decks to provide more interior space for higher profile vehicles. A key part of Walthers Auto Series, these highly detailed and fully assembled HO models feature: One time run of these road numbers, order now - limited quantity available Prototypes introduced in 1970s and still going strong today Used to haul light trucks and similar vehicles Factory-installed grab irons, ladders and brake equipment Perfect car for Cornerstone(R) Auto Series kits, each sold separately Ultra-smooth rolling 33" RP-25 turned metal wheelsets Proto MAX(TM) metal knuckle couplers PLEASE NOTE: As WalthersProto Auto Racks are the correct prototype length, a minimum 24" radius is recommended for operation.

Read more less

The WalthersTrainline Rooming House kit is a wood-frame house with a lean-to, front balcony and wood porch. Featuring a wood exterior and a shingle roof, this structure kit features plastic parts molded in appropriate colors so there's no painting needed. The Rooming House is quick and easy to build with complete, easy-to-follow illustrated instructions that are perfect for a first-time kit builder. This classic structure is a natural addition along your railroad.

Read more less

The Bachmann HO Scale Pacific Flyer Train Set is an excellent entry into the hobby of model railroading. Decorated for the legendary Union Pacific, the 0-6-0 steam locomotive with operating headlight hauls its freight like a real trooper. Following just behind is a boxcar, a gondola and a cupola caboose, all with E-Z Mate(R) magnetic knuckle couplers. The train rides on a 36" circle of E-Z Track, including 11 pieces of curved track and a curved plug-in terminal rerailer. Cars feature Also includes a UL-listed power pack and an illustrated instruction manual.

Read more less

Revolutionize freight service with WalthersMainline SD60 diesels. Based on mid-production EMD units built with safety cabs fitted with a three-piece windshield and designated as SD60M for modified, these heavy-haulers are still going strong for many original owners and shortlines. Ready for service on your railroad, check out the many features including: Limited edition - one time run of these roadnumbers! Prototypes in service 1989 to the present in main line and regional service Mid-production safety cab with three-piece windshield Open grating on steps With ESU Sound & DCC for DCC & DC layouts featuring: 4 Function outputs with brightness control by CV Fully DCC Compatible 14, 28, 128 Speedsteps Dual Mode DC/DCC 4 Air Horns changeable by CVs 2 Bells Changeable by CVs Full 8 Notch Prime Mover Sounds Compressor Dynamic Brake Multiple realistic lighting effects 21-pin DCC plug Same powerful drive as WalthersProto(R) locos featuring: 5-pole skew-wound motor 14:1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Dual machined brass flywheels Heavy die-cast metal chassis Constant & directional LED headlights Updated shell with molded drill starter points for grab irons in EMD SD60M Diesel Detail Kit (#910-257) sold separately RP-25 metal wheels Proto MAX(TM) metal knuckle couplers PLEASE NOTE: When operating Walthers-branded DCC-equipped locomotives in DC mode, do not use power packs that exceed an 18V rating. This includes MRC 1300-series power packs which have known issues with our decoders. Alternate Horns and Bells include: Horns: CV163 = Nathan K3LA (default) CV163 = Nathan P3 CV163 = Leslie RS3L CV163 = Nathan K5LA CV163 = Nathan P5 Bells: CV164 = Steel Air Bell (default) CV164 = Graham White E-Bell Click here for additional information on DCC functions: ESU CV ListESU Function MappingESU Function Output

Read more less

Revolutionize freight service with WalthersMainline SD60 diesels. Based on mid-production EMD units built with safety cabs fitted with a three-piece windshield and designated as SD60M for modified, these heavy-haulers are still going strong for many original owners and shortlines. Ready for service on your railroad, check out the many features including: Limited edition - one time run of these roadnumbers! Prototypes in service 1989 to the present in main line & regional service First SD60M safety cab with three-piece windshield Open grating on steps 21-pin DCC plug Same powerful drive as WalthersProto(R) locos featuring: 5-pole skew-wound motor 14:1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Dual machined brass flywheels Heavy die-cast metal chassis Constant & directional LED headlights Updated shell with molded drill starter points for grab irons in EMD SD60M Diesel Detail Kit (#910-257) sold separately RP-25 metal wheels Proto MAX(TM) metal knuckle couplers

Read more less

Revolutionize freight service with WalthersMainline SD60 diesels. Based on mid-production EMD units built with safety cabs fitted with a three-piece windshield and designated as SD60M for modified, these heavy-haulers are still going strong for many original owners and shortlines. Ready for service on your railroad, check out the many features including: Limited edition - one time run of these roadnumbers! Prototypes in service 1989 to the present in main line & regional service First SD60M safety cab with three-piece windshield Open grating on steps 21-pin DCC plug Same powerful drive as WalthersProto(R) locos featuring: 5-pole skew-wound motor 14:1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Dual machined brass flywheels Heavy die-cast metal chassis Constant & directional LED headlights Updated shell with molded drill starter points for grab irons in EMD SD60M Diesel Detail Kit (#910-257) sold separately RP-25 metal wheels Proto MAX(TM) metal knuckle couplers

Read more less

#212 HO Scale Talgo Truck Adaptors24 per packageUse the #230 Talgo Insertion Pic to insert #212 Talgo Adaptors into Talgo Truck coupler pockets.Talgo Truck Adaptors work with Kadee NO.5®, #58, 20-series couplers (#21, #22, #23, #24, #28, #26, #27, #28, #29) and all Whisker® couplers.To check coupler height, set the coupler into the talgo truck pocket and hold it level as possible and check the coupler height with a #205 or newer #206 HO coupler height gauge.NOTE: So it is important to check coupler height and make sure it is correct "before" you insert the talgo truck adaptor, because it's almost impossible to remove without breaking something.Once the coupler height is correct press the #230 insertion pick into the top of the #212 adapter. Make sure the pivoting hole of the coupler is over the little pin on the end of the flexible arm in the pocket. The adapter goes down through the top of the pocket and twists downward until it snaps under the two plates on top of the pocket. The adapter becomes the new pivoting post and locks the coupler in place.

Read more less

#508 HO Scale AHM Rivarossi 4 wheel Coupler Conversion Bolsters1pr. KitPassenger cars can be equipped with truck mounted couplers using the correct conversion bolster attachment. Truck mounted couplers permit closer coupling on radii down to 18" without causing binding for most passenger cars. Non-Magnetic trucks should be used with Kadee® Magne-Matic® Couplers. Wheels should be changed on AHM and Athearn trucks. Use Kadee® #521 or #522 non-magnetic wheels.Each kit contains a pair of Draft Gear Boxes, one pair of NO.5®Couplers, #634 Centering Springs, screws, special bolsters and instructions.

Read more less

$0.00 Pre-Order | Estimated delivery Summer 2023 Pre-Order Due Date: February 27th, 2023 Revolutionize freight service with WalthersMainline SD60 diesels. Based on mid-production EMD units built with safety cabs fitted with a three-piece windshield and designated as SD60M for modified, these heavy-haulers are still going strong for many original owners and shortlines. Ready for service on your railroad, check out the many features including: Limited edition - one time run of these roadnumbers! Prototypes in service 1989 to the present in main line & regional service First SD60M safety cab with three-piece windshield Open grating on steps 21-pin DCC plug Same powerful drive as WalthersProto(R) locos featuring: 5-pole skew-wound motor 14:1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Dual machined brass flywheels Heavy die-cast metal chassis Constant & directional LED headlights Updated shell with molded drill starter points for grab irons in EMD SD60M Diesel Detail Kit (#910-257) sold separately RP-25 metal wheels Proto MAX(TM) metal knuckle couplers

Read more less

Modeling any spot where crews have been working along your railroad is easy with the SceneMaster Railroad Tie set in HO. Perfect for any era, the set comes with 30 ready-to-use plastic ties featuring realistic wood grain and molded in dark brown.

Read more less

Bring the power of today's railroading to your HO layout with the WalthersMainline GE ES44 Evolution Series GEVO diesels. Introduced in 2003 to comply with tougher emission standards, and more popularly known among railfans and modelers as GEVOs, these big engines have quickly become one of the most popular locos worldwide. Designated as the ES44 (Evolution Series, 4,400 horsepower), prototype variations in North American service include locos with DC or AC traction motors and buyers have also specified center idler axles, as well as high adhesion or steerable trucks. WalthersMainline GE ES44 Evolution Series GEVO diesels feature: One time run of these roadnumbers, order now - limited quantity available The most popular prototype diesel in North America Thousands in service from 2003 to the present ESU Sound for DCC and DC layouts featuring: 4 function outputs with brightness control by CV Fully DCC compatible 14, 28, 128 speed steps Dual mode DC and DCC 4 air horns changeable by CVs 2 bells changeable by CVs Full 8-notch prime mover sounds Compressor Dynamic brake Multiple realistic lighting effects 21-pin DCC plug 2- or 4-vent dynamic brake vent as appropriate Easily handles 18" radius curves (22" or larger recommended) Six powered axles per unit LED Lighting includes: Correct headlight position per prototype Working front ditch lights Three truck styles to match prototypes: Standard high-adhesion Steerable (nonworking) C4 A1A center idler axle Same powerful drive as WalthersProto® locos featuring: Five-pole skew-wound motor 14:1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Dual machined brass flywheels Heavy die-cast metal chassis Constant and directional LED lights Correct profile radiator grilles and rooftop walkway surface details Molded drill starter points for grab irons - easily added with the GE ES44 Evolution Series Diesel Detail Kit (910-250, sold separately) RP-25 metal wheels Proto MAX(TM) metal knuckle couplers Fully assembled PLEASE NOTE: When operating Walthers-branded DCC-equipped locomotives in DC mode, do not use power packs that exceed an 18V rating. This includes MRC 1300-series power packs which have known issues with our decoders. Alternate Horns and Bells include: Horns: CV163 = 0 - Nathan K5LH (default) CV163 = 1 - Nathan K5HLL CV163 = 2 - Nathan K5H CV163 = 3 - Nathan K5LLA Bells: CV164 = 0 - Graham White E-Bell (default) CV164 = 1 - GE Steel Bell Click here for additional information on DCC functions: ESU CV ListESU Function MappingESU Function Output

Read more less

Ready for all kinds of HO heavy-hauling chores, these WalthersTrainline Coal Hoppers feature: Fully assembled, ready for fun! Built tough for years of dependable service Add to the fun of any HO train set Colorful paint and lettering schemes Body-mounted magnetic knuckle couplers RP-25 metal wheels

Read more less