The Circuitron Tortoise Switch Machine (6 Pack) Motor stalls at each end of throw No cutoff contact necessary Precision engineered gear-drive mechanism Enclosed construction Constant tension on switch points Ultra-Simple Mounting! No additional brackets or linkage necessary Fulcrum adjusts for use in all scales - Z to G. Prototypical Slow Motion Action! 3 seconds to complete the throw Convenient Auxiliary Contacts! 2 sets SPDT provided for powering the frogs or signals

Read more less

Free USA Shipping Smail (Slow Motion Actuator with Integrated Logic) features same size and mounting as the TORTOISE (sold separately). Compatible with all DCC systems that provide accessory address control. Two-wire connection to DCC bus with no external power necessary. Features 12 Pack DCC decoder equipped Optional DC mode 3 Second throw Bulletproof stall motor design SPDT contacts Simple under-layout installation. Detailed installation instructions The SMAIL™ is controlled by internal electronics manufactured by NCE Corporation. Utilizing an enhanced version of their proven Switch-It™ Stationary Decoder technology, the SMAIL™ is fully compatible with any DCC system that can provide accessory address control and/or signal control in either NMRA or Digitrax signal modes. The SMAIL™ can be used as a DCC Slow Motion Switch Machine in any scale and with all DCC system voltages. A simple programming procedure sets the address and advanced users have the ability to program individual CV’s (configuration variables).Mounting, mechanical options and specifications are all the same as the TORTOISE™ and the SMAIL™ can be used with Circuitron’s Remote Mount (800-6100) and Remote Signal Activator (800-8100).Easy programming. May also be controlled with panel switches or detection circuits. Adjustable throw speed. Power up position user definable or will default to last used. Other specifications same as TORTOISE (800-6000).

Read more less

Circuitron "Smail" Slow Motion Actuator with Integrated Logic (DCC Decoder Equipped) 12 Pack, 800-6212Smail (Slow Motion Actuator with Integrated Logic) features same size and mounting as the TORTOISE (sold separately). Compatible with all DCC systems that provide accessory address control. Two-wire connection to DCC bus with no external power necessary. Features DCC decoder equipped Optional DC mode 3 Second throw Bulletproof stall motor design SPDT contacts Simple under-layout installation. Detailed installation instructions The SMAIL™ is controlled by internal electronics manufactured by NCE Corporation. Utilizing an enhanced version of their proven Switch-It™ Stationary Decoder technology, the SMAIL™ is fully compatible with any DCC system that can provide accessory address control and/or signal control in either NMRA or Digitrax signal modes. The SMAIL™ can be used as a DCC Slow Motion Switch Machine in any scale and with all DCC system voltages. A simple programming procedure sets the address and advanced users have the ability to program individual CV’s (configuration variables).Mounting, mechanical options and specifications are all the same as the TORTOISE™ and the SMAIL™ can be used with Circuitron’s Remote Mount (800-6100) and Remote Signal Activator (800-8100).12 SMAILs per pack. Easy programming. May also be controlled with panel switches or detection circuits. Adjustable throw speed. Power up position user definable or will default to last used. Other specifications same as TORTOISE (800-6000).

Read more less

Smail (Slow Motion Actuator with Integrated Logic) features same size and mounting as the TORTOISE (sold separately). Compatible with all DCC systems that provide accessory address control. Two-wire connection to DCC bus with no external power necessary. Features DCC decoder equipped Optional DC mode 3 Second throw Bulletproof stall motor design SPDT contacts Simple under-layout installation. Detailed installation instructions The SMAIL™ is controlled by internal electronics manufactured by NCE Corporation. Utilizing an enhanced version of their proven Switch-It™ Stationary Decoder technology, the SMAIL™ is fully compatible with any DCC system that can provide accessory address control and/or signal control in either NMRA or Digitrax signal modes. The SMAIL™ can be used as a DCC Slow Motion Switch Machine in any scale and with all DCC system voltages. A simple programming procedure sets the address and advanced users have the ability to program individual CV’s (configuration variables).Mounting, mechanical options and specifications are all the same as the TORTOISE™ and the SMAIL™ can be used with Circuitron’s Remote Mount (800-6100) and Remote Signal Activator (800-8100).Easy programming. May also be controlled with panel switches or detection circuits. Adjustable throw speed. Power up position user definable or will default to last used. Other specifications same as TORTOISE (800-6000).

Read more less

The Bachmann 39016 Ballast Spreader Car is a must-have for any HO scale model train enthusiast. With a convenient shutoff feature and height adjustment capabilities, this car makes spreading ballast on your layout a breeze. Achieve a professional and realistic look with ease, thanks to this high-quality product. More Information Item # 39016 Brand Bachmann Scale HO MSRP $71.00   WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Read more less

The Bachmann 39015 Ballast Spreader offers a convenient shutoff feature for precise application of ballast on your HO scale railway. This easy to use tool ensures an even distribution of ballast, resulting in a realistic and professional appearance for your model trains. More Information Item # 39015 Brand Bachmann Scale HO MSRP $44.00   WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Read more less

Spread ballast the easy way with the Bachmann HO Scale Ballast Spreader. The clear-acrylic device features an internal slop sheet that routes ballast for precise placement on either side of the rails and in between as you slide it along the track. Works on HO and On30 gauged rail. More Information Item # 39001 Brand Bachmann Scale HO MSRP $32.00   WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Read more less

SwitchPilot 3 Plus decoders are optimized for stationary use on your system and can switch conventional double coil switch drives, light signals, magnetic uncouplers, light bulbs or other stationary consumption. In order to facilitate the rather cumbersome configuration of magnetic article decoders, the SwitchPilot 3 Plus has an innovative operating concept consisting of a 4-line, illuminated OLED display and three input buttons. Modes The SwitchPilot 3 Plus is multi-protocol and can be used with control panels according to the Märklin® Motorola® system (e.g. 6021, Central Station® or Mobile Station®) as well as DCC-enabled control panels. The configuration can take place on both the main track and the programming track. Thanks to RailCom®, CVs can also be read out. Functioning The SwitchPilot 3 Plus can be supplied directly from the digital system or from an external DC or change voltage source. It has a total of 16 transistor outputs, which are grouped in the 8 exit pairs 1 to 8. Each output pair contains two outputs (OutA and OutB) and can be configured individually for the desired use case: In pulse mode, the output is switched on as soon as a switching command is received. Since the output automatically switches off again as soon as a time stored in the decoder has been reached, a burn-through of magnetic articles is prevented. At the moment (K83-compatible) the output remains active as long as the button on the control panel is pressed. This operating mode is suitable for turnout drives with final shutdown or for de-caps. In bi-stable continuous operation (k84-compatible), the two outputs are switched on and off: When pressing the first button (red) on the control panel, the output Out A is switched on. It remains active until pressing the assigned button (green) activates the output Out B of the same output group. Out A and Out B behave like a change switch.In alternating flasher mode, the outputs Out A and Out B of an output pair are switched on alternately with an adjustable flashing frequency. The change indicator is started with the command "Gerade/Green" of the assigned button and stopped again with the command "Branching/Red".Optionally, the output can also be slowly dimmed and dimmed (so-called "zoom" for incandescent lamp simulation). Set The SwitchPilot 3 Plus can be flexibly adjusted either on the programming track with DCC control panels or on the main track with POM ("Programming on Main") or can also be read out via RailCom® CVs. On request, he also learns the addresses directly via a programming button. The setting is, of course, the simplest with the integrated OLED displays as well as the three input buttons: All (!) Settings can be checked directly on the decoder and changed on request. "Programming" with the help of your headquarters is not required. It really can't be any easier. The ESU LokProgrammer can be used for firmware updates. Protection As with our locomotive decoders, the outputs of the SwitchPilot 3 Plus are protected against overload. We want you to enjoy your decoder for as long as possible. More Information Item # 51831 Brand ESU Scale Multi WARNING: This product can expose you to a chemical, which is known to the State of California to cause Cancer and Reproductive Harm - For more information go to www.P65Warnings.ca.gov

Read more less

Smail (Slow Motion Actuator with Integrated Logic) features same size and mounting as the TORTOISE (sold separately). Compatible with all DCC systems that provide accessory address control. Two-wire connection to DCC bus with no external power necessary. Features DCC decoder equipped Optional DC mode 3 Second throw Bulletproof stall motor design SPDT contacts Simple under-layout installation. Detailed installation instructions The SMAIL™ is controlled by internal electronics manufactured by NCE Corporation. Utilizing an enhanced version of their proven Switch-It™ Stationary Decoder technology, the SMAIL™ is fully compatible with any DCC system that can provide accessory address control and/or signal control in either NMRA or Digitrax signal modes. The SMAIL™ can be used as a DCC Slow Motion Switch Machine in any scale and with all DCC system voltages. A simple programming procedure sets the address and advanced users have the ability to program individual CV’s (configuration variables).Mounting, mechanical options and specifications are all the same as the TORTOISE™ and the SMAIL™ can be used with Circuitron’s Remote Mount (800-6100) and Remote Signal Activator (800-8100).Easy programming. May also be controlled with panel switches or detection circuits. Adjustable throw speed. Power up position user definable or will default to last used. Other specifications same as TORTOISE (800-6000).

Read more less

Smail (Slow Motion Actuator with Integrated Logic) features same size and mounting as the TORTOISE (sold separately). Compatible with all DCC systems that provide accessory address control. Two-wire connection to DCC bus with no external power necessary. Features DCC decoder equipped Optional DC mode 3 Second throw Bulletproof stall motor design SPDT contacts Simple under-layout installation. Detailed installation instructions The SMAIL™ is controlled by internal electronics manufactured by NCE Corporation. Utilizing an enhanced version of their proven Switch-It™ Stationary Decoder technology, the SMAIL™ is fully compatible with any DCC system that can provide accessory address control and/or signal control in either NMRA or Digitrax signal modes. The SMAIL™ can be used as a DCC Slow Motion Switch Machine in any scale and with all DCC system voltages. A simple programming procedure sets the address and advanced users have the ability to program individual CV’s (configuration variables).Mounting, mechanical options and specifications are all the same as the TORTOISE™ and the SMAIL™ can be used with Circuitron’s Remote Mount (800-6100) and Remote Signal Activator (800-8100).12 SMAILs per pack. Easy programming. May also be controlled with panel switches or detection circuits. Adjustable throw speed. Power up position user definable or will default to last used. Other specifications same as TORTOISE (800-6000).

Read more less