Turntables

8 products


  • Sale Walthers Cornerstone 933-2851 | Motorized 110' Turntable - Assembled - 16-7/16" 41.7cm Overall Diameter | HO Scale

    Walthers Cornerstone Walthers Cornerstone 933-2851 | Motorized 110' Turntable - Assembled - 16-7/16" 41.7cm Overall Diameter | HO Scale

    Sure to be the focal point of any HO Scale engine terminal, this Walthers Cornerstone 110' Motorized Turntable is where steam locomotives, and later diesels, were turned around at the end of their runs. Normally serving a roundhouse, turntables were placed adjoining the roundhouse, servicing tracks and at major terminals, backshops. This 110' turntable is large enough to turn larger locomotives such as a 4-8-4 Northerns and 2-10-2s. It'll look great at your locomotive terminal, at junctions and anywhere else medium-sized steam locomotives must be turned. On your layout use the 110' Motorized Turntable as the heart of your servicing facility alongside otherĀ Cornerstone railroad maintenance structures 110' 33.5m length typical of bigger tables built from 1900s on - some still in service today Must-have detail for engine terminals Holds locos up to 15-1/4" 38.7cm long Layout mounting templates for pit and Cornerstone Turntable Control Box User-friendly, illustrated instructions simplify assembly Requires 15-9/16" 39.5cm mounting hole to be cut in layout for installation 16-7/16" 41.7cm overall diameter Control Box included for use on layouts with DC or DCC train control New Cornerstone Turntable Control Box for simple operation and programming with: Programmable indexing for up to 99 different tracks One-touch 180-degree bridge rotation in either direction Simplified LED display with adjustable brightness Operable from up to four remote locations with additional Control Boxes (933-2320 each sold separately) Optional: To control turntable operation with DCC throttle or serial UART controller, purchase Cornerstone Advanced Control Module (933-2321, available separately) Comes complete with motor and Control Box, operates on 12-18v AC, 16-24v DC power supply (power supply not included) Comes with Code 83 rail installed on bridge

    $279.99$265.99

  • Sale Walthers Cornerstone 933-2618 | Motorized 130' Turntable - Assembled - 10-3/8" 26.3cm Overall Diameter | N Scale

    Walthers Cornerstone Walthers Cornerstone 933-2618 | Motorized 130' Turntable - Assembled - 10-3/8" 26.3cm Overall Diameter | N Scale

    Sure to be the focal point of any N Scale engine terminal, this Walthers Cornerstone 130' Motorized Turntable is where steam locomotives, and later diesels, were turned around at the end of their runs. Normally serving a roundhouse, turntables were placed adjoining the roundhouse, servicing tracks and at major terminals, backshops. This 130' turntable is large enough to turn larger locomotives such as a 4-8-4 Northerns, 2-10-2s all the way up to a 4-8-8-4 Big Boy. It'll look great at your locomotive terminal, at junctions and anywhere else large steam locomotives must be turned. On your layout use the 130' Motorized Turntable as the heart of your servicing facility alongside otherĀ Cornerstone N Scale railroad buildings. 130' length typical of large tables built from 1920s on - some still in service today Must-have detail for engine terminals Holds locos up to 9-3/4" 24.7cm long - big enough for a 4-8-8-4! Layout mounting templates for pit and Cornerstone Turntable Control Box User-friendly, illustrated instructions simplify assembly Requires 9-15/16" 25.2cm mounting hole to be cut in layout for installation 10-3/8" 26.3cm overall diameter Control Box included for use on layouts with DC or DCC train control New Cornerstone Turntable Control Box for simple operation and programming with: Programmable indexing for up to 99 different tracks One-touch 180-degree bridge rotation in either direction Simplified LED display with adjustable brightness Operable from up to four remote locations with additional Control Boxes (933-2320 each sold separately) Optional: To control turntable operation with DCC throttle or serial UART controller, purchase Cornerstone Advanced Control Module (933-2321, available separately) Comes complete with motor and Control Box, operates on 12-18v AC, 16-24v DC power supply (power supply not included) Comes with Code 80 rail installed on bridge

    $269.99$256.49

  • Sale Walthers Cornerstone 933-2860 | Motorized 90' Turntable - Assembled - 13-3/4" 34.9cm Overall Diameter | HO Scale

    Walthers Cornerstone Walthers Cornerstone 933-2860 | Motorized 90' Turntable - Assembled - 13-3/4" 34.9cm Overall Diameter | HO Scale

    Sure to be the focal point of any HO Scale engine terminal, this Walthers Cornerstone 90' Motorized Turntable is where steam locomotives, and later diesels, were turned around at the end of their runs. Normally serving a roundhouse, most smaller turntables were placed adjoining the roundhouse and servicing tracks. This 90' turntable is large enough to turn typical locomotives as large as a 2-8-2 Mikado or 4-6-2 Pacific. It'll look great at smaller terminals, at junctions and anywhere else steam locomotives must be turned. On your layout use the 90' Motorized Turntable as the heart of your servicing facility alongside otherĀ Cornerstone railroad maintenance structures Typical of tables built from 1900s on - some still in service today Fits most engine terminals Holds locos up to 12-3/8" 31.4cm long User-friendly, illustrated instructions simplify operation and programming Layout mounting templates for pit and Cornerstone Turntable Control Box Control Box included for use on layouts with DC or DCC train control New Cornerstone Turntable Control Box for simple operation and programming with: Programmable indexing for up to 99 different tracks One-touch 180-degree bridge rotation in either direction Simplified LED display with adjustable brightness Operable from up to four remote locations with additional Control Boxes (933-2320 each sold separately) Comes complete with motor and Control Box, operates on 12-18v AC, 16-24v DC power supply (power supply not included) Comes with Code 83 rail installed on bridge Optional: To control turntable operation with DCC throttle or serial UART controller, purchase Cornerstone Advanced Control Module (933-2321, available separately) Requires 12-3/4" 32.3cm mounting hole 13-3/4" 34.9cm overall diameter

    $279.99$265.99

  • Walthers Cornerstone 933-2320 | Cornerstone Turntable Control Box - For 933-2851, 2859, 2860 and 2618 Turntables Only (Each Sold Separately) | Multi Scale

    Walthers Cornerstone Walthers Cornerstone 933-2320 | Cornerstone Turntable Control Box - For 933-2851, 2859, 2860 and 2618 Turntables Only (Each Sold Separately) | Multi Scale

    The Walthers Cornerstone Turntable Control Box allows you to expand operations of your HO or N Scale Cornerstone Motorized Turntable up to four remote locations. This add-on control box is designed for use with the turntables as noted above. It can be used on layouts running on DC or DCC train control and provides simple operation and programming with programmable indexing for up to 99 different tracks, one-touch 180-degree bridge rotation in either direction and a simplified LED display with adjustable brightness. Allows adding additional Motorized Turntable control points Use on DC or DCC layouts Two-digit LED display Measures: 3" 7.6cm Square Inside 3-5/8" 9.2cm Square Exterior Allow 1" 2.5cm clearance; additional space may be required for cables.Ā For advanced control using DCC, Arduino and similar advanced controllers please refer to theĀ Cornerstone Turntable Advanced Control Module.Please Note: This unit is designed for use only with the following Motorized Turntables, each sold separately: HO Scale 90' 933-2860 HO Scale 110' 933-2851 HO Scale 130' 933-2859 N Scale 130' 933-2618

  • Walthers Cornerstone 933-2321 | Cornerstone Turntable Advanced Control Module - For DCC Operation | Multi Scale Walthers Cornerstone 933-2321 | Cornerstone Turntable Advanced Control Module - For DCC Operation | Multi Scale

    Walthers Cornerstone Walthers Cornerstone 933-2321 | Cornerstone Turntable Advanced Control Module - For DCC Operation | Multi Scale

    The Walthers Cornerstone Turntable Advanced Control Module makes it possible to operate your Motorized Turntable using DCC, serial UART, keypad or switch contacts. For DCC applications this circuit will function as a stationary decoder with no CV or programming required. The Turntable Advanced Control Module includes the circuit, Connection cable and complete instructions. Adds DCC, serial UART, keypad and switch contact input modes including: DCC control using stationary decoder protocols Numeric Keypad Button per track Rotary selector switch Control box emulation Serial Rx/Tx UART port Ā  Digital outputs for remote dual digit display and controlling track power relays to selectively power service tracks automatically Measures: 2-3/4" (70mm) x 4-3/16" (107mm)Ā Please Note: This unit is designed for use only with the following Motorized Turntables, each sold separately: Ā  HO Scale 90' 933-2860 HO Scale 110' 933-2851 HO Scale 130' 933-2859 N Scale 130' 933-2618

  • Walthers Cornerstone 933-2858 | Turntable Power Supply for Cornerstone Turntables - D800mA, 16V DC Output | Multi Scale

    Walthers Cornerstone Walthers Cornerstone 933-2858 | Turntable Power Supply for Cornerstone Turntables - D800mA, 16V DC Output | Multi Scale

    Power your Walthers Cornerstone HO or N Scale Turntables (sold separately) quickly and easily with this plug-in wall unit featuring: Installs in minutes - instructions included Independent 800 ma 16VDC filtered power supply Includes adapter cord to connect to turntable Positive contact barrel-type connectors Intertek listed Made especially for use with Cornerstone HO 90' (933-2860), 110' (933-2851) and 130' (933-2859), and N Scale 130' (933-2618) Motorized Turntables, each sold separately - may also be used with earlier N Scale 130' 933-2616, HO 130' 933-2850 and HO 90' 933-2849 Turntables. PLEASE NOTE: Unit operates on 120V (standard North American house current) only.

  • Walthers Cornerstone 933-1050 | DC Motor & Gearbox for Swing Bridge, Oil Pumps, Turntable & Other Kits - Motorizing Kit | Multi Scale

    Walthers Cornerstone Walthers Cornerstone 933-1050 | DC Motor & Gearbox for Swing Bridge, Oil Pumps, Turntable & Other Kits - Motorizing Kit | Multi Scale

    Animate your models in minutes with the Walthers Cornerstone Motorizing Kit. This fully assembled drive unit is a drop-in mount for Walthers Double Track Swing Bridge (933-3088), 90' Turntable Kit (933-3171) and the Walking Beam Oil Pumps in HO (933-3170) or N Scale (933-3248), all sold separately. The Motorizing Kit can easily be adapted to other models. It's complete with a rugged DC motor and has 360:1 gearing to insure smooth, slow speeds.Ā PLEASE NOTE: This unit is for use with DC power only; maximum 12V, .25 amps. Use with Cornerstone structures that accept motorizing 360:1 gear ratio Works on standard DC

  • Walthers Cornerstone 933-2859 | Motorized 130' Turntable DC/DCC - Assembled - 19-1/8" 47.8cm Overall Diameter | HO Scale

    Walthers Cornerstone Walthers Cornerstone 933-2859 | Motorized 130' Turntable DC/DCC - Assembled - 19-1/8" 47.8cm Overall Diameter | HO Scale

    Sure to be the focal point of any HO Scale engine terminal, this Walthers Cornerstone 130' Motorized Turntable is where steam locomotives, and later diesels, were turned around at the end of their runs. Normally serving a roundhouse, most were also placed for access to backshop facilities and servicing tracks. This 130' turntable was about as big as they come - large enough to turn a 4-8-8-4 Big Boy and other large, modern engines. On your layout use the 130' Motorized Turntable as the heart of your servicing facility alongside otherĀ Cornerstone railroad maintenance structures Typical of tables built from 1900s on - some still in service today 130' 39.6m length holds locos up to 18-7/8" 46.1cm long - big enough for a 4-8-8-4! Fits most engine terminals User-friendly, illustrated instructions simplify operation and programming Layout mounting templates for pit and Cornerstone Turntable Control Box Control Box included for use on layouts with DC or DCC train control New Cornerstone Turntable Control Box for simple operation and programming with: Programmable indexing for up to 99 different tracks One-touch 180-degree bridge rotation in either direction Simplified LED display with adjustable brightness Operable from up to four remote locations with additional Control Boxes (933-2320 each sold separately) Comes complete with motor and Control Box, operates on 12-18v AC, 16-24v DC power supply (power supply not included) Comes with Code 83 rail installed on bridge Requires 18-1/4" 45.6cm mounting hole, 19-1/8" 47.8cm overall diameter Optional: To control turntable operation with DCC throttle or serial UART controller, purchase Cornerstone Advanced Control Module (933-2321, available separately)

    $279.99

© 2024 Squeaky's Trains & Things, Powered by Shopify

    • American Express
    • Apple Pay
    • Diners Club
    • Discover
    • Meta Pay
    • Google Pay
    • Mastercard
    • PayPal
    • Shop Pay
    • Venmo
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account