Walthers

From the days of steam to diesel, buildings like this were a key part of any railroad's operations. This Cornerstone set of detailed N Scale structures includes three complete structures and accessories. features include: Typical of buildings found on main line, branch line, short line and industrial railroads Fits steam and diesel layouts from the 1880s to 1970s Parts for three complete buildings and accessories - use together or mix and match Includes Interlocking Tower, Speeder Shed, Crossing Shanty, two positionable Crossing Gates and Speeder Motor Car Detailed plastic parts molded in gray Measures: Shanty: 1 x 3/4 x 7/8" or 2.5 x 1.9 x 2.2cm Interlocking Tower: 1-1/4 x 2 x 2-1/4" or 3.1 x 5 x 5.7cm Shed: 1-1/8 x 2-3/8 x 1-1/4" or 2.8 x 6 x 3.1cm Crossing Gates: each 2-1/2" or 6.3cm in down position

Read more less

$0.00 Pre-Order | Estimated delivery Fall 2024Guaranteed Pre-Order Due Date: May 30, 2024   Bring big power to your HO railroad with the WalthersMainline SD75M! Built from 1995 to 1996 at the request of the Santa Fe for a higher horsepower unit (4300 versus 4000 for a standard SD70), most were later transferred to the new Burlington Northern & Santa Fe Railway following the 1995 merger, where many are still in service with BNSF. These units were built with the wide North American Safety Cab, thus the "M" (for "modified") in the model designation. Other features include: One time run of these roadnumbers, order now - limited quantity available! Correct North American Safety Cab per prototype Flush radiators per early production units Correct HTCR-1a or HTCR-1b trucks per prototype Brass Nathan K5 air horn Treadplate detail on walkways Minimum radius 18" (22" or larger recommended) Fully assembled LED Lighting includes: 21-Pin DCC plug Same powerful drive as WalthersProto(R) locos featuring: 5-pole skew-wound motor 14:1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Dual machined brass flywheels Heavy die cast metal chassis Cab interior 5000-gallon fuel tank w/road specific details Standard bell on conductor's side Molded drill starter points for grab irons - easily added with SD70-Series Diesel Detail Kit (910-261, sold separately) Correct size RP-25 metal wheels Proto MAX(TM) magnetic metal knuckle couplers  Road-specific details on this model include: Low headlight HTCR-1a trucks Nose door with window  More Information Item # 11003 Brand WalthersMainline Scale HO Type EMD SD75M Engine Electronics Standard DC Road Name BNSF Railway Road Number 8268 MSRP $169.98

Read more less

Enjoy complimentary shipping! Bundle your purchases for even more savings with our free shipping option. (This offer is optional) Providing enough steam to power train heat and some air conditioning systems on postwar trains taxed the standard water supply of EMD F7 A units set-up for passenger service, prompting EMD to roll out the new FP7 in 1949. Though outwardly similar to the F7A, FP7s were actually four feet longer to accommodate bigger water tanks with a capacity of 950 US gallons. Standard passenger power into the Amtrak era and beyond (with some also handling freight chores), these WalthersProto replicas are fully assembled and ready for service with: One time run of these roadnumbers, order now - limited quantity available! Matches the prototypes' extended frame and body Railroad-specific details Five-pole, skew-wound, high-torque, high-efficiency can motor Helical gears with 14:1 ratio for smooth, ultra-quiet running Easy multiple-unit operation Correct RP-25 wheelsets Proto MAX(TM) magnetic metal knuckle couplers Road-specific details of this WalthersProto replica include: A unit details - Nathan M5 Air horn w/all bells forward Whip-style radio antenna w/conduit Freight pilot Knob-style sand hatch doors Late water filler Cab wind deflectors Etched-metal cab sunshades Standard type winterization hatch Vertical body louvers Photo-etched Farr vertical grilles Dual headlights - upper single, lower twin vertical More Information Item # 920-49546 Brand WalthersProto Scale HO Engine Electronics DC, DCC Ready Type EMD Diesel Road Name Chesapeake & Ohio Road Number 8005 & 8505 Estimated Release Date June 2024

Read more less

Power your HO railroad's flagship streamliners with these superb replicas of EMD's famed E8 and E9 diesels. Introduced in 1948 with the new 567B prime mover, production contiued until 1954 when the virtually identical E9 was introduced with the more powerful 567C prime mover. Powerful, reliable and economical, EMD E units handled premiere long-distance trains for decades, with many ending their long careers in commuter service and ocassionally handling fast freight trains. Fully assembled and ready for service, features include: One time run of these roadnumbers, order now - limited quantity available! Road- and era-specific details Rugged and reliable WalthersProto drive 21-pin DCC plug Formed wire grab irons and handrails Photo-etched lift rings Cab interior w/seats and figures All-wheel drive and electrical pickup Constant and directional LED lights Correct size RP-25 metal wheels Proto MAX(TM) metal knuckle couplers Road-specific features of this WalthersProto replica include: Nathan five-chime (all forward) air horn Single horizontal sealed-beam headlight Working backup light Flush number boards Removed skirts Freight pilot Southern-style MU bracket 4-hose MU set at left and right Photo-etched E8A-style Farr air grilles Dynamic brake with 48" fan Winterization hatches w/levers Single offset steam generator Rooftop air reservoirs w/piping Round spark arrestors Rectangular air vent Roller bearing sideframes Wheel slip hubs Speed recorder Southern-style left and right water tanks More Information Item # 920-49922 Brand WalthersProto Scale HO Engine Electronics DC / DCC Ready Type EMD Diesel Road Name Southern Road Number 6900

Read more less

Bring your engine terminal to life with this Cornerstone Two-Stall 130' Brick Diesel House. Typical of shop buildings constructed from the 1930s on especially to repair and maintain diesels, structures like this can still be found at many terminals. Based on Milwaukee Road prototype, this engine house looks great in any diesel-era servicing scene and is adaptable to other industrial scenes. The Two-Stall 130' Brick Diesel House is one of many Cornerstone N Scale railroad buildings. Prototypes in service from 1930s to the present Must-have for major engine terminals and backshops Slotted base accepts popular rail sizes Easy-to-build plastic kit Molded in four appropriate colors and clear plastic Main Building: 10-3/4 x 6-3/4 x 3-1/4" 27.3 x 17.1 x 8.2cm Office: 3-1/8 x 1-5/8 x 1-1/4" 7.9 x 4.1 x 3.1cm More Information Item # 933-3266 Brand Walthers Cornerstone  Scale N Type Building Kit Size 10-3/4 x 6-3/4 x 3-1/4" or 27.3 x 17.1 x 8.2cm Availability In-Stock/Restockable TCA Grading C-10 Mint - Brand New Instruction Sheet View/Download

Read more less

From the early years of the 20th century to the present, buildings like the Walthers Cornerstone American Hardware Supply have been a familiar part of big city skylines. Just about any manufacturing operation could be found here over the years. You'll find this building is easy to modify for your needs too! Optional loading doors, windows or solid brick panels are provided for the ground floor so you can give your model a unique appearance. A modular design makes it easy to combine kits for a larger building, and there are many possibilities for kitbashing too. A concrete railroad loading dock and colorful signs for a variety of businesses round out this versatile structure. As shown American Hardware Supply measures: 8-1/4 x 5-3/4 x 6-7/8" 20.9 x 14.6 x 17.4cm American Hardware Supply is just one of a wide variety of Cornerstone N Scale industrial buildings. Classic 1900s design Brick construction Fits steam or diesel-eras Molded in appropriate color More Information Item # 933-3253 Brand Walthers Cornerstone  Scale N Type Building Kit Size 8-1/4 x 5-3/4 x 6-7/8" or 20.9 x 14.6 x 17.4cm Availability In-Stock/Restockable TCA Grading C-10 Mint - Brand New Instruction Sheet View/Download

Read more less

While most roads had one major backshop, the prototypes for the Walthers Cornerstone Machine Shop allowed railroads to make repairs at outlying terminals since it was often faster, more cost-effective and got the locomotives back on the road and earning their keep. As new engine terminals were built, most received a machine shop capable of handling just about any type of repair that might be needed. This kit matches the design of the Modern Roundhouse (933-3260, sold separately), and can be built as an attached or freestanding building. It also includes a boiler house, which would supply steam, electricity and compressed air to the entire facility. Large roll-up doors can be built open or closed, and the baseplate of the Machine Shop kit has slots that accept popular rail sizes. The Machine Shop is one of many Cornerstone N Scale railroad buildings. As shown the Machine Shop measures: 8-1/8 x 5-1/4 x 6-1/2" 20.6 x 13.3 x 16.5cm Authentic North American prototype Use with late steam and diesel-era layouts Matches design of Walthers Modern Roundhouse kit Separate windows Floor baseplate accepts popular rail sizes Molded in appropriate colors plus clear window glazing More Information Item # 933-3264 Brand Walthers Cornerstone  Scale N Type Building Kit Size 8-1/8 x 5-1/4 x 6-1/2" or 20.6 x 13.3 x 16.5cm Availability In-Stock/Restockable TCA Grading C-10 Mint - Brand New Instruction Sheet View/Download

Read more less

The prototypes for railroad buildings like the Walthers Cornerstone Car Shop evolved into long, specialized structures dedicated to freight or passenger car repairs. Several tracks ran the entire length of the building so cars could be moved quickly between workstations handling trucks, brakes, interiors and other appliances. Perfect for servicing any kind of equipment, this kit features a modular design so several can be combined to build a larger building, and it's a natural for modeling all kinds of heavy industries. Without the car shop, a railroad just doesn't run. Big enough to look right, small enough to fit steam or diesel-era layouts, this model is packed with features. Detailed brickwork, an authentic saw-tooth style roof with skylights, separate windows, roll-up doors, openings in the floor for rail, everything right down to the decals, is included. The basic Car Shop kit as shown builds a three-stall shop measuring 7 x 5-1/4 x 4-3/4" 17.7 x 13.3 x 12cm. The Car Shop is one of a wide variety of Cornerstone N Scale railroad buildings. 3-stall brick Car Shop Modular design allows kits to be combined for a larger complex Saw-tooth style roof Great for steam or diesel-era layouts Molded in appropriate colors and clear plastic More Information Item # 933-3228 Brand Walthers Cornerstone  Scale N Type Building Kit Size 7 x 5-1/4 x 4-3/4" or 17.7 x 13.3 x 12cm Availability In-Stock/Restockable TCA Grading C-10 Mint - Brand New Instruction Sheet View/Download

Read more less

The Walthers Cornerstone N Scale Industrial Office is typical of small buildings found at the entrance to large factories like steel mills and assembly shops. It's also ideal for use as a great free-standing small business, yard office or crew room. Structures like the Industrial Office are all over and look great in any industrial district. Use it in scenes with other Cornerstone N Scale industrial buildings. Realistic brickwork Realistic entry steps Decal signs for a variety of businesses Front awnings, gutters, downspouts and rooftop ventilators Use as railroad or trucking office, stand-alone business or entry building for manufacturing complex Molded in color plus clear glazing More Information Item # 933-3834 Brand Walthers Cornerstone  Scale N Type Building Kit Size 3-5/8 x 2-1/4 x 1-3/4" or 9.2 x 5.7 x 4.4cm Availability In-Stock/Restockable TCA Grading C-10 Mint - Brand New Instruction Sheet View/Download

Read more less

Revitalize your N Scale business community with the Modern Shopping Center I from Cornerstone(R), featuring three stores in one compact, contemporary structure! The model features a decorative front wall for added realism, detailed brickwork, large glass windows and entry doors, and colorful signs for a variety of businesses. More Information Item # 933-3891 Brand Walthers Cornerstone  Scale N Type Building Kit Size 6-1/4 x 3 x 2-1/8" or 15.8 x 7.6 x 5.3cm Availability In-Stock/Restockable TCA Grading C-10 Mint - Brand New Instruction Sheet View/Download

Read more less

Performing everything from painting to complete rebuilds, the prototypes for the Walthers Cornerstone Allied Rail Rebuilders kit captures the realism of these large buildings in a size that works on most layouts. Lots of details are included, such as an EMD 567 prime mover, separate roof vents, interior trusses, doors and windows. Allied Rail Rebuilders is typical of brick industrial and maintenance shops and is ideal for other types of heavy industries. Great for steam or diesel-era layouts Brick main building with clerestory Rooftop smokestacks Detailed interior trusses EMD 567 prime mover Molded in appropriate colors Realistic decals More Information Item # 933-3211 Brand Walthers Cornerstone  Scale N Type Building Kit Size 5-1/2 x 5-5/8 x 3-1/2" or 13.7 x 14 x 8.7cm Availability In-Stock/Restockable TCA Grading C-10 Mint - Brand New Instruction Sheet View/Download

Read more less

At the Walthers Cornerstone Hardwood Furniture Company boxcar doors slide open. Ramps clang into place from the loading dock. Strong backs bend to their task as the first crates are carried out of the warehouse and into the car. Tucked into the cramped quarters of the industrial district, the Hardwood Furniture Company is the kind of industry that every layout needs. It's big enough to look right, small enough to fit and packed with realism. Check out the authentic architectural trim molded on each wall or the over 50 separate windows! There's a covered loading dock for boxcars and roll-up doors for trucks. Up on the roof, a water tank, elevator house and chimney are included to detail this important area. Complete instructions and colorful signs round out the kit. Plus, modelers who desire to make the Hardwood Furniture Company a larger building will find it's easy to expand with some minor kitbashing. Realistic concrete walls Recessed loading dock and tunnel on the first floor Signs for several businesses Molded in appropriate colors Easy-to-build plastic kit More Information Item # 933-3232 Brand Walthers Cornerstone  Scale N Type Building Kit Size 6-3/8 x 7-3/16" or 15.9 x 17.9cm Availability In-Stock/Restockable TCA Grading C-10 Mint - Brand New Instruction Sheet View/Download

Read more less