$100 to $250

The AM-1 is a module that you can install on your model train layout and control 4 turnouts (switch tracks). The AM-1 can be controlled and setup by a Ring Engineering RailPro Controller, such as the HC-2 Handheld Controller. The AM-1 can also be used to control Accessory Projects. You can control a turntable, swing bridge, oil pumps, lights in buildings, and much more!!! You can use our RailPro Assistant Software to design custom screens for your HC-2 to control your accessories!!! Features: Control up to 4 turnouts per Module Control Snap or Motor Operated Turnouts Size: 4.60 x 3.00 x 1.18 inches     Important Note: When an AM-1 is used as an Accessory Module, the AM-1 hardware has 8 outputs that can be software controlled for 4 motor outputs or 8 sourcing outputs. It also has another 8 I/O that can be configured for 8 inputs or 8 sinking outputs. Currently there is only one software configuration available for the module (2 motor outputs, 4 sinking outputs, and 8 inputs). We expect to offer more software configurations in the future.  

Read more less

Multi Scale (31feet in HO, 57 feet on N) 4.3 Inches high 5 Pack A Great Value

Read more less

Kato's Insulated UniJoiners are used for electrically separating sections "blocks" on your layout. A "block" is a section of track long enough to hold a complete train (minimum requirement) on the main line or short enough to hold just a locomotive on a siding in a yard. This makes it ideal for additional operations and controls under DCC and which also allows for more advanced train detection. 20 per package. HO/N Scale

Read more less

The Rapido 102021 HO Easy-Peasy Passenger Car Lighting Set is an innovative solution for model railroad enthusiasts looking to add realistic lighting to their HO scale passenger cars. This lighting set is designed to provide a hassle-free installation and operation, making it a perfect choice for both beginners and experienced modelers. Key Features: Battery-Powered: The Easy-Peasy lighting set is powered by two LR41 batteries (included), eliminating the need for complex wiring or connections to your track power. This ensures consistent lighting without flickering, even over switches and dead spots. Magnetic Control: The set includes a magnetic wand that allows you to easily turn the lights on and off. This feature provides convenient control without the need for additional decoders or electronic components. Compact Design: The lighting set is compact enough to fit into a variety of HO scale passenger cars, cabooses, trolleys, and buses. Easy Installation: The installation process is straightforward and requires no soldering or complex wiring. Simply insert the batteries, place the lighting set in the roof of your passenger car, and you’re ready to go. Versatile Use: While designed for HO scale, the Easy-Peasy lighting set can also be used in larger scale passenger cars and other vehicles, providing flexibility for different modeling needs. Benefits: Enhanced Realism: Adding interior lighting to your passenger cars enhances the overall realism of your model railroad, making nighttime scenes more engaging and lifelike. No Power Drain: Since the lighting set is battery-powered, it does not draw power from your track, preventing any potential drain on your power pack and ensuring smooth operation of your trains. No Flickering: The battery-powered design ensures that the lights remain steady and flicker-free, providing a consistent and reliable lighting solution. User-Friendly: The magnetic wand control and easy installation make this lighting set user-friendly, allowing you to quickly and easily add lighting to your passenger cars without any technical difficulties. Ideal For: Model Railroad Enthusiasts: Whether you’re a seasoned modeler or just starting out, the Easy-Peasy lighting set is a great addition to any HO scale layout. Collectors: This lighting set adds value to your collection by enhancing the appearance and functionality of your passenger cars. Hobbyists: If you enjoy customizing and detailing your model trains, the Easy-Peasy lighting set offers a simple yet effective way to add interior lighting to your vehicles. Bring your model railroad to life with the Rapido 102021 HO Easy-Peasy Passenger Car Lighting Set. Its innovative design, ease of use, and realistic lighting effects make it an excellent choice for enhancing the visual appeal of your passenger cars. Order yours today and experience the difference that quality lighting can make!

Read more less

The TSU-PNP8 is a universal factory board replacement sound decoder suitable for use in many manufacturer’s diesel models such as those made by Atlas, Athearn, and InterMountain Models. It is suitable for a wide variety of models from HO to S scale. You will feel like you are in the cab with the amazing new features that Tsunami2 has to offer including: Reactive Dynamic Digital Exhaust, Functioning locomotive brakes, and train brakes. We also offer a large selection of selectable sound effects including: prime movers (up to 12), bells (12), airhorns (40+) and more! This decoder includes a connector to easily add a CurrentKeeper (P.N. 810140) to maintain performance over dirty track and switches.

Read more less

Revolutionize freight service with WalthersMainline SD60 diesels. Based on mid-production EMD units built with safety cabs fitted with a three-piece windshield and designated as SD60M for modified, these heavy-haulers are still going strong for many original owners and shortlines. Ready for service on your railroad, check out the many features including: Limited edition - one time run of these roadnumbers! Prototypes in service 1989 to the present in main line and regional service Mid-production safety cab with three-piece windshield Open grating on steps With ESU Sound & DCC for DCC & DC layouts featuring: 4 Function outputs with brightness control by CV Fully DCC Compatible 14, 28, 128 Speedsteps Dual Mode DC/DCC 4 Air Horns changeable by CVs 2 Bells Changeable by CVs Full 8 Notch Prime Mover Sounds Compressor Dynamic Brake Multiple realistic lighting effects 21-pin DCC plug Same powerful drive as WalthersProto(R) locos featuring: 5-pole skew-wound motor 14:1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Dual machined brass flywheels Heavy die-cast metal chassis Constant & directional LED headlights Updated shell with molded drill starter points for grab irons in EMD SD60M Diesel Detail Kit (#910-257) sold separately RP-25 metal wheels Proto MAX(TM) metal knuckle couplers PLEASE NOTE: When operating Walthers-branded DCC-equipped locomotives in DC mode, do not use power packs that exceed an 18V rating. This includes MRC 1300-series power packs which have known issues with our decoders. Alternate Horns and Bells include: Horns: CV163 = Nathan K3LA (default) CV163 = Nathan P3 CV163 = Leslie RS3L CV163 = Nathan K5LA CV163 = Nathan P5 Bells: CV164 = Steel Air Bell (default) CV164 = Graham White E-Bell Click here for additional information on DCC functions: ESU CV ListESU Function MappingESU Function Output

Read more less

Generate new business for your HO railroad with the Lakeshore Energy Power Plant kit from Cornerstone(R). Typical of modernized plants in service from the 1970s to the present, this detailed structure kit features: New version with main building, plus newly-tooled "bag house" dust collector and high-efficiency exhaust stack Realistic detail and design sized to fit most layouts Perfect destination for unit coal trains Molded in three colors and clear plastic Model a complete power grid with these Cornerstone kits, including the Coal Conveyor with Transfer House (#933-4171), Modern High-Voltage Transmission Towers (#933-3343), Rotary Dumper (#933-4170), Substation (#933-4175), Intermediate Height "Wood" Utility Poles (#933-4173), plus SceneMaster Utility Poles (#949-4120) & Utility Company Vehicles (#949-11636 series), each sold separately

Read more less

Multi Scale (25 feet in HO, 48 feet on N) 3.6 Inches high 5 Pack A Great Value

Read more less

HO Scale Metal poles and arms Ready to use with resistors attached Designed for easy mounting 2 lights in the package

Read more less

Use to light city streets, sidewalks, downtown areas, parks, bridges and more. 20mA set Dimensions - 1.39" w x 6.252" h (35.3 mm w x 158.8 mm h) RoHS Compliant

Read more less

Quantity: One per packageThe WH-6 wiring harness is used with LM-3, LM-3S, LM-2, and LM-2S modules. It is used to wire in light outputs 5 and 6 and more. Please see LM instructions for actual wiring. WH-6 has a JST 6 pin with crimp style pins. We have found the crimp style pins to be far more dependable than the insulation displacement connectors.

Read more less

The LM-3 is a module that you can install into a model train locomotive so the locomotive can be controlled and setup by a Ring Engineering RailPro Controller, such as the HC-2 Handheld Controller with a Color Touch Screen! After the LM-3 is installed in a locomotive, you will be able to control the locomotive speed, direction, up to 6 light outputs! The LM-3 has “Direct Radio” (RF transceiver) built inside. The built in RF module allows commands and data to be sent and received to and from the module. You can load a picture of your choice into the LM-3 module. Then you will be able to touch the screen of the HC-2 to take control of your locomotive!The LM-3 is electrically compatible with the DCC plug found in many locomotives to promote easy installation. Product Specifications: Sound Profile: Universal (all) Dimensions: 1.50 x 0.68 x 0.25 in DCC Track Voltage: 7.5V – 18V Light Outputs 6   The LM-3 is equipped with Direct Radio! This allows Ring Engineering Controlling Devices such as the HC-2, Handheld Controller with Color Touch screen, to control and configure your locomotive by sending and receiving data directly to the LM-3 through the air by use of RF transmission! The Direct Radio is very fast giving your locomotive quick response to your controls. Further, a controlling device can detect your LM-3 with just a few touches on the screen. Because of Direct Radio, you can load a picture of your locomotive to the LM-3! You can also load Light Effects and much more!Radio Load Sharing is a truly an innovative invention from Ring Engineering. It allows your locomotives that are linked together (sometimes called Consisted or MU'ed) to actually share pulling power. Only RailPro equipped locomotives use Direct Radio to talk to each other to be sure each locomotive pulls its share of the load! Even more amazingly, Ring Engineering's patent pending process only takes seconds to setup!Six light outputs. Can be configured for multiple light effects on a single output including On/Off, Dim, Ditch, Mars, Strobe, and more! Additional light effects can be loaded using DirectRadio!Built in protection with fault reporting by Direct Radio!Tiny size 1.50 x 0.68 x 0.25 Inches for easy fit.

Read more less