CouponAd-NoMAP
Walthers SceneMaster Walthers SceneMaster 949-6064 | Warehouse Workers and Accessories | HO Scale
5 Figures with Accessories Bring new life to your HO layout with ready-to-use Walthers SceneMaster figure sets! Each figure is carefully sculpted with realistic detail and hand-painted (unless noted). Hire these hard workers, and add new life to any modern warehouse, industry and more! The set is complete five figures and a variety of accessories including a hand-truck, pallet jack, and more.
£11.15
Walthers SceneMaster Walthers SceneMaster 949-6071 | Farners Figures (6 - Includes Accessories) | HO Scale
6 Figures (Includes Accessories) Bring your HO farm scene to life in minutes with this ready-to-use set! Molded in realistic poses and hand-painted, this set includes six figures, and three geese.
£11.32£10.18
Walthers SceneMaster Walthers SceneMaster 949-6074 | Majestic Horses - 9 Figures | HO Scale
Bring your HO farm scenes to life in minutes with this ready-to-use figure set! Molded in realistic poses and hand-painted, this set includes nine assorted horses.
£12.12
WalthersMainline Walthers Trainline 910-10432 | EMD GP9 Phase II with Chopped Nose - Standard DC - Canadian National #4002 (red, black, white stripes) | HO Scale
WalthersMainline takes the hard work out of modeling one of the most popular prototype diesels ever, with the EMD GP9 Phase II (sometimes referred to as the Phase 2) with Chopped Short Hood in HO Scale! Typical of railroad rebuilds from the 1960s on that are still going strong today, they're nicely detailed, and equipped with the proven power of a WalthersProto(R) drive. Perfect for railroads big or small the WalthersMainline EMD GP9 Phase II with Chopped Short Hood features: One of the most widely used diesels ever - based on Phase II units rebuilt for improved forward visibility and in service from the 1960s to present Limited edition - one time run of these roadnumbers! Scale width hood with correct contours See-through steps Same powerful drive as WalthersProto(R) locos featuring: Five-pole skew-wound motor 14 to 1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Machined brass flywheel Heavy die-cast metal chassis Constant and directional LED headlights 21-pin DCC plug Molded drill starter points - add grab irons to your model easily with the GP9 Phase II Diesel Detail Kit (#910-258 sold separately) Additional information on DCC functions:ESU CV ListESU Function MappingESU Function Output Alternate horns and bells can be programmed on the sound decoder using these CVs: Horns: CV163 = 0 - Leslie A-200 (default) CV163 = 1 - Wabco single-chime CV163 = 2 - Nathan M3 CV163 = 3 - Leslie S3L Bells: CV164 = 0 - Bronze bell (default) CV164 = 1 - Steel bell
£109.99
WalthersMainline Walthers Trainline 910-10433 | EMD GP9 Phase II with Chopped Nose - Standard DC - Canadian National #4010 (red, black, white stripes) | HO Scale
WalthersMainline takes the hard work out of modeling one of the most popular prototype diesels ever, with the EMD GP9 Phase II (sometimes referred to as the Phase 2) with Chopped Short Hood in HO Scale! Typical of railroad rebuilds from the 1960s on that are still going strong today, they're nicely detailed, and equipped with the proven power of a WalthersProto(R) drive. Perfect for railroads big or small the WalthersMainline EMD GP9 Phase II with Chopped Short Hood features: One of the most widely used diesels ever - based on Phase II units rebuilt for improved forward visibility and in service from the 1960s to present Limited edition - one time run of these roadnumbers! Scale width hood with correct contours See-through steps Same powerful drive as WalthersProto(R) locos featuring: Five-pole skew-wound motor 14 to 1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Machined brass flywheel Heavy die-cast metal chassis Constant and directional LED headlights 21-pin DCC plug Molded drill starter points - add grab irons to your model easily with the GP9 Phase II Diesel Detail Kit (#910-258 sold separately) Additional information on DCC functions:ESU CV ListESU Function MappingESU Function Output Alternate horns and bells can be programmed on the sound decoder using these CVs: Horns: CV163 = 0 - Leslie A-200 (default) CV163 = 1 - Wabco single-chime CV163 = 2 - Nathan M3 CV163 = 3 - Leslie S3L Bells: CV164 = 0 - Bronze bell (default) CV164 = 1 - Steel bell
£109.99
WalthersMainline Walthers Trainline 910-20432 | EMD GP9 Phase II with Chopped Nose - ESU(R) Sound and DCC - Canadian National #4012 (red, black, white stripes) | HO Scale
PLEASE NOTE: When operating Walthers-branded DCC-equipped locomotives in DC mode, do not use powerpacks that exceed an 18V rating. This includes MRC 1300-series powerpacks, which have known issues with our decoders. WalthersMainline Phase II Chopped Nose GP9 is a must-have model for your 1960s and later diesel roster! Outwardly similar to the earlier GP7, and sharing the same boxy, no frills body with its high, short hood, minor production changes in the number and placement of louvers on locomotives built from 1955 to 1957 resulted in what modelers and railfans refer to as "phase two" GP9s. In the 1960s, many roads began rebuilding their GP9s as an affordable alternative to new equipment, and many were refitted with chopped short hoods to improve forward visibility. Like it's prototypes, many are still going strong today and the WalthersMainline Phase II GP9 with chopped nose is perfect power for any assignment and features: One time run of these roadnumbers - order now, limiyted quantity available! Detailed body with chopped nose Based on Phase II units rebuilt in the 1960s by many owners Scale width hood with correct contours With or without dynamic brakes as appropriate See-through steps Correct RP-25 metal wheels Available with ESU Sound and DCC for DCC or DC layouts featuring: 4 function outputs with brightness control by CV Fully DCC compatible 14, 28 or 128 speed steps Dual mode DC and DCC 4 Airhorns changeable by CVs 2 bells changeable by CVs Full 8-notch prime mover sounds Compressor Dynamic brake Same powerful drive as WalthersProto(R) locos featuring: Five-pole skew-wound motor 14 to 1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Machined brass flywheel Heavy die-cast metal chassis Constant and directional LED headlights 21-pin DCC plug Molded drill starter points - add grab irons to your model easily with the GP9 Phase II Diesel Detail Kit (#910-258 sold separately) Additional information on DCC functions:ESU CV ListESU Function MappingESU Function Output Alternate Horns and Bells include: Horns: CV163 = 0 - Leslie A-200 (default) CV163 = 1 - Wabco Single Chime CV163 = 2 - Leslie S3L CV163 = 3 - Nathan M5 Bells: CV164 = 0 - EMD Brass Bell (default) CV164 = 1 - EMD Steel Bell
£147.80
WalthersMainline Walthers Trainline 910-20433 | EMD GP9 Phase II with Chopped Nose - ESU(R) Sound and DCC - Canadian National #4013 (red, black, white stripes) | HO Scale
PLEASE NOTE: When operating Walthers-branded DCC-equipped locomotives in DC mode, do not use powerpacks that exceed an 18V rating. This includes MRC 1300-series powerpacks, which have known issues with our decoders. WalthersMainline Phase II Chopped Nose GP9 is a must-have model for your 1960s and later diesel roster! Outwardly similar to the earlier GP7, and sharing the same boxy, no frills body with its high, short hood, minor production changes in the number and placement of louvers on locomotives built from 1955 to 1957 resulted in what modelers and railfans refer to as "phase two" GP9s. In the 1960s, many roads began rebuilding their GP9s as an affordable alternative to new equipment, and many were refitted with chopped short hoods to improve forward visibility. Like it's prototypes, many are still going strong today and the WalthersMainline Phase II GP9 with chopped nose is perfect power for any assignment and features: One time run of these roadnumbers - order now, limiyted quantity available! Detailed body with chopped nose Based on Phase II units rebuilt in the 1960s by many owners Scale width hood with correct contours With or without dynamic brakes as appropriate See-through steps Correct RP-25 metal wheels Available with ESU Sound and DCC for DCC or DC layouts featuring: 4 function outputs with brightness control by CV Fully DCC compatible 14, 28 or 128 speed steps Dual mode DC and DCC 4 Airhorns changeable by CVs 2 bells changeable by CVs Full 8-notch prime mover sounds Compressor Dynamic brake Same powerful drive as WalthersProto(R) locos featuring: Five-pole skew-wound motor 14 to 1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Machined brass flywheel Heavy die-cast metal chassis Constant and directional LED headlights 21-pin DCC plug Molded drill starter points - add grab irons to your model easily with the GP9 Phase II Diesel Detail Kit (#910-258 sold separately) Additional information on DCC functions:ESU CV ListESU Function MappingESU Function Output Alternate Horns and Bells include: Horns: CV163 = 0 - Leslie A-200 (default) CV163 = 1 - Wabco Single Chime CV163 = 2 - Leslie S3L CV163 = 3 - Nathan M5 Bells: CV164 = 0 - EMD Brass Bell (default) CV164 = 1 - EMD Steel Bell
£147.80
WalthersTrainline Walthers Trainline 931-2500 | EMD GP15-1 - Standard DC - Burlington Northern & Santa Fe (green, orange, yellow) | HO Scale
Expand your HO trainset fun in minutes with the WalthersTrainline EMD GP15-1 diesel! Fully assembled and ready for service, features include: Directional headlights All-wheel drive and electrical pick-up Powerful can motor with flywheel Heavy die-cast metal frame for added pulling power Colorful paint and lettering schemes Body-mounted magnetic knuckle couplers RP-25 metal wheels
£56.58
WalthersTrainline Walthers Trainline 931-2501 | EMD GP15-1 - Standard DC - Canadian Pacific (red, white) | HO Scale
Expand your HO trainset fun in minutes with the WalthersTrainline EMD GP15-1 diesel! Fully assembled and ready for service, features include: Directional headlights All-wheel drive and electrical pick-up Powerful can motor with flywheel Heavy die-cast metal frame for added pulling power Colorful paint and lettering schemes Body-mounted magnetic knuckle couplers RP-25 metal wheels
£56.58
WalthersTrainline Walthers Trainline 931-2502 | EMD GP15-1 - Standard DC - Conrail (blue, white) | HO Scale
Expand your HO trainset fun in minutes with the WalthersTrainline EMD GP15-1 diesel! Fully assembled and ready for service, features include: Directional headlights All-wheel drive and electrical pick-up Powerful can motor with flywheel Heavy die-cast metal frame for added pulling power Colorful paint and lettering schemes Body-mounted magnetic knuckle couplers RP-25 metal wheels
£56.58
WalthersTrainline Walthers Trainline 931-2503 | EMD GP15-1 - Standard DC - CSX Transportation (YN3; blue, yellow, white) | HO Scale
Expand your HO trainset fun in minutes with the WalthersTrainline EMD GP15-1 diesel! Fully assembled and ready for service, features include: Directional headlights All-wheel drive and electrical pick-up Powerful can motor with flywheel Heavy die-cast metal frame for added pulling power Colorful paint and lettering schemes Body-mounted magnetic knuckle couplers RP-25 metal wheels
£56.58
WalthersTrainline Walthers Trainline 931-2504 | EMD GP15-1 - Standard DC - Norfolk Southern (black, white) | HO Scale
Expand your HO trainset fun in minutes with the WalthersTrainline EMD GP15-1 diesel! Fully assembled and ready for service, features include: Directional headlights All-wheel drive and electrical pick-up Powerful can motor with flywheel Heavy die-cast metal frame for added pulling power Colorful paint and lettering schemes Body-mounted magnetic knuckle couplers RP-25 metal wheels
£56.58
