Coupons

The TSU-PNP8 is a universal factory board replacement sound decoder suitable for use in many manufacturer’s diesel models such as those made by Atlas, Athearn, and InterMountain Models. It is suitable for a wide variety of models from HO to S scale. You will feel like you are in the cab with the amazing new features that Tsunami2 has to offer including: Reactive Dynamic Digital Exhaust, Functioning locomotive brakes, and train brakes. We also offer a large selection of selectable sound effects including: prime movers (up to 12), bells (12), airhorns (40+) and more! This decoder includes a connector to easily add a CurrentKeeper (P.N. 810140) to maintain performance over dirty track and switches. Product Specifications: Sound Profile: EMD-2 Diesel Dimensions: 74 x 17 x 5mm Max. Motor Stall Current: 2A Max. Function Current: 100mA (each output) Function Outputs: 8 Audio Amplifier: 2 Watt, 8-Ohm Load DCC Track Voltage: 7.5V – 22V Sound Channels: 16

Read more less

Built-&-Ready® Landmark Structure®, Cozy Cabin, was designed for the outskirts and rural areas of a layout. The authentically weathered and hand-painted building is pre-lit and made for use with our Just Plug® Lighting System. This homey building features equally detailed interior and exterior features. Look inside through the screen door at the warm, flickering 3D fireplace in the center of the back wall with a rocking chair resting next to it. Pots, pans, lanterns and deer and fish mounts clutter the walls. A giant bear rug cloaks the center of the wood floor. The building is made up of logs, sealed together with chinking and has a rusty tin roof with patches. The natural stone chimney was inspired by hand-picked creek rocks. Additional features include rock steps that lead up to the covered porch, a wash tub, wooden bench and a stack of split wood resting on the side of the building.

Read more less

Built-&-Ready® Landmark Structure®, Cozy Cabin, was designed for the outskirts and rural areas of a layout. The authentically weathered and hand-painted building is pre-lit and made for use with our Just Plug® Lighting System. This homey building features equally detailed interior and exterior features. Look inside through the screen door at the warm, flickering 3D fireplace in the center of the back wall with a rocking chair resting next to it. Pots, pans, lanterns and deer and fish mounts clutter the walls. A giant bear rug cloaks the center of the wood floor. The building is made up of logs, sealed together with chinking and has a rusty tin roof with patches. The natural stone chimney was inspired by hand-picked creek rocks. Additional features include rock steps that lead up to the covered porch, a wash tub, wooden bench and a stack of split wood resting on the side of the building.

Read more less

Enjoy complimentary shipping!Bundle your purchases for even more savings with our free shipping option. (This offer is optional) This Bowser Trains locomotive features realistic sound and digital command control for a smooth, precise operation. With detailed design and HO scale size, it is perfect for any model train enthusiast. Own a piece of railroad history with the iconic Spokane, Portland, and Seattle #97 Alco RS3 locomotive. More Information Item # 25298 Brand Bowser Scale HO Type Alco RS3 Engine Electronics DC, DCC & Sound Road Name Spokane, Portland & Seattle Road Number 97 MSRP $319.99

Read more less

Upgrade your HO scale rolling stock with the Rapido Trains 102044 RP25 Metal Wheelsets. These high-quality wheelsets are designed to enhance the performance and appearance of your model trains, ensuring smooth and reliable operation on your layout. Key Features: RP25 Code 110 Tread: Provides optimal performance and compatibility with most HO scale track systems. Insulated One Side: Ensures electrical isolation, making these wheelsets ideal for use in various rolling stock applications. Durable Construction: Made from high-quality metal for long-lasting durability and realistic appearance. Precision Engineering: 1.015" axle length and 33" diameter wheels ensure a perfect fit and smooth rolling action. Value Pack: Includes 12 wheelsets, offering great value for upgrading multiple cars in your collection. Why Choose Rapido Trains: Rapido Trains is synonymous with quality and precision in the model railroading community. Their products are designed with meticulous attention to detail, ensuring that every component meets the highest standards of performance and realism. Perfect for Model Railroad Enthusiasts: Whether you’re a seasoned model railroader or just starting out, the Rapido Trains 102044 RP25 Metal Wheelsets are an essential upgrade for your HO scale rolling stock. Enhance the realism and reliability of your trains with these expertly crafted wheelsets. Order Yours Today: Don’t miss out on the opportunity to improve your model railroad experience. Add the Rapido Trains 102044 RP25 Metal Wheelsets to your cart and enjoy smoother, more reliable operation on your layout. More Information Item # 102044 Brand Rapido Trains MSRP $11.95

Read more less

The Digitrax DH127PS | Series 7 Mobile Decoder for HO Scale is a must-have for any model railway enthusiast. With its advanced technology and impressive performance, this decoder will bring your HO scale locomotives to life. Enjoy smooth and precise control over your trains with this high-quality decoder. Fits many 8-pin Medium Socket DCC-Ready HO locomotives Digitrax 9-Pin Socket and PS-Harness Medium Plug with approximately.1.2" wires 1.0 Amp/2 Amps Peak 2 FX7 Functions, 200ma Output More Information Item # DH127PS Brand Digitrax Scale HO MSRP $27.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet

Read more less

Built-&-Ready® Landmark Structure®, Kids Clubhouse, is the local hangout for the neighborhood kids. This rickety building was scabbed together and built entirely from scraps. The exterior is decorated with hand-painted messages and salvaged road and business signs. One window is curtained off with burlap potato sacks, while another is jammed with a car window, held in place by a bedframe. A ladder covered in paint stains leans against the building, leading up to the lookout point located on the rusty tin roof. A checkered race flag signals the club's unity. There are two access points to the building: a weathered door and a hidden crawl space. Additional details include a tattered car seat resting on cinderblocks and a reclaimed wooden spool for a side table. The shack can be placed in the backyard of a home, in the middle of the woods or anywhere kids want a clubhouse. Dimensions: 1-1/4 x 1-5/16 x 1-3/16" or 3.17 x 3.33 x 3.01cm Colors may vary from actual product. More Information Item # BR5072 Brand Woodland Scenics Scale HO Type Assembled Building Availability In-Stock/Restockable TCA Grading C-10 Mint - Brand New

Read more less

This product is versatile in terms of direction of the placement of the board and mounting in various configurations.  It can easily replace a QSI board, a Dual Mode decoder board or be mounted directly on the electric motor or frame with Kapton tape.  (It is recommended that a piece of Kapton tape be placed on the bottom of the mother board to assure electrical isolation from the electric motor or frame.) This mother board does not include a 21 Pin Decoder. This mother board and connector board require soldering. These printed circuit boards are NOT INTENDED FOR USE IN A DC SYSTEM. The on board resistors are sized for LEDs. (1K)  V5 (old) vs V5B (current) The V5 has the capability of easily adding a two wire stay alive.  The U+ and the GND pads are positioned close together and work well.  The three wire stay alive or Power Pack has a third wire that could be connected to pin-1 on the base of the 21-pin connector.  Pin -1 is associated with Aux 10 on a Loksound 5 decoder and used to turn the Power Pack off and on.  It is used frequently but not as easy to solder to as a pad.  I have a video on my Facebook page of the procedure.   The V5B has a dedicated pad for the white control wire of the Power Pack and is labeled "W".  Now there are six pads in the row of soldering pads on the bottom of the board just under the small light connector board in the picture on the right.  They are, right to left; W, U+, GND, A12, A11 and U+.  The other difference is that the "W" pad is connected to pin-2 of the 21-pin connector and the Aux 7 function controls the Power Pack on this board.  It is the default function assigned to the LokSound 5 decoders.  Package Includes: 1x Mother Board 1x Connector Board Dimensions: 0.67" x 2.20" x 0.35" (17 mm x 56 mm x 0.9 mm)The mother board includes;  One 21 Pin Decoder receptacle, Two pairs of track input pads, One pair of motor input pads, One pair of stay alive pads (U+ and GND), Pads for two Aux functions (Version 5 Feature) Two pairs of speaker pads wired in parallel, Resistors for use with LED lighting. (on board 1K)  The connector board contains pads for twelve pairs of lighting function connections. U+ or the blue wire has twelve connected pads for the common power source. The negative (-) discrete function pads are all labeled to indicate their connection to the functions available in the decoder. The lighting connector was designed so that the shell of the diesel locomotive can be easily separated from the frame without un-soldering wires. This does require that the headlight and rear lights be mounted in the shell of the locomotive and that the diesel has a removable dynamic brake shell. Incandescent lamps or bulbs are not well suited for the Decoder Buddys or associated decoders.  It can be done but it will require more electronics to achieve a result.  Our recommendation is to go with LEDs.

Read more less

The LokSound by ESU Rectangular Speaker with Enclosure is ideal for use in N, TT and small HO Scale model locomotives. This speaker includes a built-in enclosure to enhance its output and is rated at 8 Ohms and 5 Watts. At only 11/32 x 1/2 x 1/8" 9 x 13 x 3mm, this tiny speaker will easily fit inside widely used narrow-hood diesels such GPs, SDs, GE U-Boats or GEVO diesels as well as other locomotives. More Information Item # 50342 Brand ESU Scale N & HO MSRP 10.99 WARNING: This product can expose you to a chemical, which is known to the State of California to cause Cancer and Reproductive Harm - For more information go to www.P65Warnings.ca.gov

Read more less

This new speaker module fits wherever 20mm x 40mm rectangular speakers were previously installed. With the help of the built-in passive radiator in conjunction with a high-performance rectangular speaker, the module achieves significantly improved bass reproduction and achieves a considerable sound pressure even in the highs and mids. The module is particularly suitable for diesel or steam locomotives where contemporary bass reproduction is important. The speaker fits perfectly with our LokSound 5 micro, LokSound 5 or LokSound 5 L decoders. More Information Item # 50347 Brand ESU Scale HO, O & G MSRP 17.99 WARNING: This product can expose you to a chemical, which is known to the State of California to cause Cancer and Reproductive Harm - For more information go to www.P65Warnings.ca.gov

Read more less

This loudspeaker module is suitable for large tenders with gauge H0 or OO or models with gauge 0. Its built-in passive radiator, in conjunction with the built-in broadband speaker, results in good bass reproduction without neglecting the highs and mids. Especially for diesel or steam locomotives, this module is a real alternative for those who like deep bass but don't need extreme volume. The speaker fits perfectly with our LokSound 5 or LokSound 5 L decoders. More Information Item # 50346 Brand ESU Scale HO, O & G MSRP 17.99 WARNING: This product can expose you to a chemical, which is known to the State of California to cause Cancer and Reproductive Harm - For more information go to www.P65Warnings.ca.gov

Read more less

SoundTraxx Blunami decoders will change the way you enjoy the model railroading hobby. They operate in DC, DCC, or wireless mode with the free Blunami App. The Blunami BLU-21PNEM8The BLU-21PNEM8 is a 1-amp Digital Sound Decoder with 8 function outputs. It is designed for easy plug-in operation when mated to a 21-pin NEM connector. You will feel like you are in the cab with the amazing new features that Blunami has to offer including: Reactive Dynamic Digital Exhaust, Functioning locomotive and train brakes, injectors, power reverse, and firebox flicker. We also offer a large selection of selectable sound effects including: exhaust chuffs (10), prime movers (up to 12), bells (12), Whistles (90), airhorns (40+), couplers, dynamos, and more! Need Help Choosing a Sound Profile?We have tons of sounds to match a wide range of locomotives. So many, in fact, we cannot fit them all on one decoder. Therefore, they are broken up into sound profiles of like sounds (Steam, EMD, GE, Electric, etc.). If you don't know which sound profile you need, the best place to start is the Sound Selection References. These will list all the prime movers or exhaust chuffs available on each sound profile. If you need further assistance explore these links:  Decoder Selector: Tells you which board format and part number you need for specific models. Sound Samples: Hear SoundTraxx sounds in action!

Read more less