Coupons

SwitchPilot 3 decoders are optimized for stationary use on your system and can switch conventional double coil switch drives, light signals, magnetic uncouplers, light bulbs or other stationary consumption.In order to facilitate the rather cumbersome configuration of magnetic article decoders, the SwitchPilot 3 has an innovative operating concept consisting of a 4-line, illuminated OLED display and three input buttons. Modes The SwitchPilot 3 is multi-protocol and can be used with workstations according to the Märklin® Motorola® system (e.g. 6021, Central Station® or Mobile Station®) as well as DCC-enabled control panels. The configuration can take place on both the main track and the programming track. Thanks to RailCom®, CVs can also be read out. Functioning The SwitchPilot 3 can be supplied directly from the digital system or from an external DC or change voltage source. It has a total of 8 transistor outputs, which are grouped in the 4 exit pairs 1 to 4. Each output pair contains two outputs (OutA and OutB) and can be configured individually for the desired use case:In pulse mode, the output is switched on as soon as a switching command is received. The fact that the output automatically switches off again as soon as the time stored in the decoder has elapsed prevents the burning of magnetic article drives.At the moment (K83-compatible) the output remains active as long as the button on the control panel is pressed. This operating mode is suitable for turnout drives with final shutdown or for de-caps.In bi-stable continuous operation (k84-compatible), the two outputs are switched on and off: When pressing the first button (red) on the control panel, the output Out A is switched on. It remains active until pressing the assigned button (green) activates the output Out B of the same output group. Out A and Out B behave like a change switch.In alternating flasher mode, the outputs Out A and Out B of an output pair are switched on alternately with an adjustable flashing frequency. The change indicator is started with the command "Ge- rade/Green" of the assigned button and stopped again with the command "Branching/Red".Optionally, the output can also be slowly dimmed and dimmed (so-called "zoom" for glow lam pen simulation).With the switch 3 mode switch, you can switch all output pairs together to the "k83" or "k84" modes at lightning speed, regardless of how they are configured. Feedback Since the SwitchPilot 3 is RailCom®-capable, all settings can be read out and changed directly in the built-in state on request. In combination with an ECoS as an ideal "partner", the SwitchPilot 3 can record and display the actual turnout setting with appropriately prepared turnout drives. Finally, you have the certainty that your switch has switched correctly! Set The SwitchPilot 3 can be flexibly adjusted either on the programming track with DCC control panels or on the main track with POM ("Programming on Main") or can also be read out via RailCom® CVs. On request, he also learns the addresses directly via a programming button. The easiest way to set is, of course, with the integrated OLED display and the three input buttons: All (!) Settings can be checked directly on the decoder and changed on request. A"Programming" with the help of your control panel is not required. It really can't be any easier. The ESU LokProgrammer can be used for firmware updates. Protection As with our locomotive decoders, the outputs of the SwitchPilot 3 are largely protected against overload. We want you to enjoy your decoder for as long as possible. More Information Item # 51840 Brand ESU Scale Multi WARNING: This product can expose you to a chemical, which is known to the State of California to cause Cancer and Reproductive Harm - For more information go to www.P65Warnings.ca.gov

Read more less

NEM652 8-Pin Interface Version The LokPilot 5 DCC is the "twin brother" of the LokPilot 5. The two share almost all characteristics, however, the LokPilot 5 DCC is a pure DCC decoder and cannot be used on analog AC systems. This lack of flexibility comes with a cheaper price. LokPilot 5 decoders are offered with all common interfaces.  Modes The LokPilot 5 DCC is a "pure-bred" DCC decoder. 14 to 128 speed steps are as natural as 2- and 4-digit addresses. Up to 32 functions can be triggered. Thanks to RailComPlus® the decoders register automatically with a suitable DCC system like the ESU CabControl. The decoder accepts all DCC programming modes and thanks to RailCom® the CV values ​​can be read on the main track with RailCom equipped DCC systems. For command stations that only program the CVs from 1-255 auxiliary CV registers exist. The LokPilot 5 DCC decoder recognizes the Märklin® braking sections as well as the ZIMO® HLU / ZACKCommands or the Lenz® ABC system. Also braking with DCC brake modules or with DC voltageis possible. It also stops with a Selectrix® brake diode. An ABC automatic shuttle trainenables automatic commuting between two train stations. The LokPilot 5 DCC decoder can be used on analog DC trains. The top speedcan be set separately. The decoder switches between the operating modes fully automatically "on-the-fly". Features We know that you want your locomotives to be as realistic as possible. Therefore we have the LokPilot 5DCC packed with function outputs. Depending on the interface version, each LokPilot offers 5 DCCDecoder at least 10 amplified function outputs with 250mA output current each. In the executionswith PluX22 or 21MTC interface there are 4 outputs to control servos orLogic level outputs added. All-important lighting functions are available. The brightness of each outputcan be set separately. The decoder masters automatic pushing and pullingwhen uncoupling for ROCO®, Krois® and Telex® couplings. Motor control The engine control of the LokPilot 5 DCC has been fundamentally improved again. A variably adjustablePWM clock frequency from 10kHz to 50kHz ensures super quiet operation, especially with bell-armature motors.Operation - The typical “hum” is a thing of the past. The load control now has up to10 CVs  which can be adjusted for difficult cases. The unique "Autotune" function enablesthe automatic calibration of the decoder to the motor. The LokPilot 5 DCC decoder delivers up to 1.5A of motor current. Enough juice even for older motors. Operational safety On request, a PowerPack can be fitted to the LokPilot 5 DCC to bridge dirty rail sections. Protection Of course, all function outputs and the motor output are protected against overload. We want you to enjoy your decoder for as long as possible. More Information Item # 59620 Brand ESU Scale HO & O WARNING: This product can expose you to a chemical, which is known to the State of California to cause Cancer and Reproductive Harm - For more information go to www.P65Warnings.ca.gov

Read more less

By default, this decoder does not come with a pre-programmed Sound Profile. Nevertheless, we provide complimentary Sound File programming for all ESU decoders. Please be aware that opting for Sound File Programming in your order might result in a shipment delay of 1 to 2 business days. Visit this link to preview ESU Sounds With its unique design the LokSound 5 Direct DCC can easily replaceboards that provide poor motor control, low volume, or generally inferiorsound. Not only will the decoder work fine with most factory installedspeakers, but it will sound even better with our new 11x15mm“sugar cube” speaker and sound enclosure kits. Modes The LokSound 5 DCC is made for the North American and Australianmarkets. It is a pure DCC Decoder, which supports RailComPlus and canalso be used on DC layouts. With its size of 0.67x2.72inch/17x69mmThe V5 Direct DCC will fit in almost all of the popular North Americanand Australian HO manufacutrers locomotives. In the DCC format, 14 to 128 speed steps are as natural as 2- and4-digit addresses and up to 32 functions. Thanks to RailComPlus®, thedecoders log on fully automatically to a suitable digital central unit. It masters all DCC programming modes and, thanks to RailCom®, theCV values on the main track can be read out with suitable controlpanels. For panels that can only program the CVs from 1-255, thereare auxiliary registers. Braking with DCC brake modules or DC voltage is also possible. Anautomatic ABC shuttle allows automatic commuting between two stations. The LokSound 5 decoder can also be used on analog DC tracks. Sound The LokSound 5 decoder can play up to 10 channels simultaneously.Each channel can be resolved with up to 16 bit / 31250 kHz and finallyoffers hi-fi quality on your system. There is virtually no difference tothe original more audible. A Class D audio power amplifier with upto 3W output powers the speakers, which may have between 4 ohmsand 32 ohms impedance. The huge 128 Mbit sound storage providesenough capacity. All individual sounds can be individually adjusted in volume. The superflexible Sound engine without rigid schedule allows the prototypicalsimulation of all imaginable locomotives. Three separately adjustablebraking functions and two alternative load scenarios give you the maximumcontrol over your Locos. Features We know that you want your locomotives to be as realistic as possible.That’s why we packed the LokSound 5 with function outputs.Depending on the interface version, each LokSound 5 decoder offersat least 8 amplified function outputs. Of course tons of lighting effectsare also available. The brightness of each output can be set separately.The decoder handles the automatic on and off during uncoupling forROCO®, Krois® and Telex® couplings. In order to keep compatiblewith the thousands of LokSound Selects and LokSound V4 decodersalready on the market we made sure to add many of the most popularfeatures of that Generation! This Includes the Full Throttle features,including the Famous Drive Hold! Motor Control The engine control of the LokSound 5 has again been fundamentallyimproved. A variably adjustable PWM clock frequency of 10kHzto 50kHz ensures especially in bell armature motors for a super quietoperation - The typical “humming” is a thing of the past. The loadcontrol can now be adapted to difficult cases with up to 10 CVs. Theunique “Autotune” function allows the automatic decompression ofthe decoder to the motor. The LokSound 5 decoder delivers up to 1.5A motor current enoughjuice for older engines. More Information Item # 58821 Brand ESU Scale HO WARNING: This product can expose you to a chemical, which is known to the State of California to cause Cancer and Reproductive Harm - For more information go to www.P65Warnings.ca.gov

Read more less

Whether you're looking for a getaway in the woods or a home with some country appeal, the Rustic Cabin is the perfect place to sit back and relax in a rocking chair. The Rustic Cabin features old board and batten siding, a covered porch and shake shingle roof. Two rocking chairs on the porch provide a convenient location to watch a sunrise, and a milk can sits off to the side. Additional features include a pile of wood to prepare for cold nights, a wood stove pipe, a bent TV antenna, and an electric meter on the back of the cabin. This Built-&-Ready Landmark Structure comes with a pre-installed LED porch light made for use with the Just Plug Lighting System. 20mA RoHS Compliant Colors may vary from actual product. More Information Item # BR4955 Brand Woodland Scenics Scale N Type Assembled Building Availability In-Stock/Restockable TCA Grading C-10 Mint - Brand New

Read more less

Bring your engine terminal to life with this Cornerstone Two-Stall 130' Brick Diesel House. Typical of shop buildings constructed from the 1930s on especially to repair and maintain diesels, structures like this can still be found at many terminals. Based on Milwaukee Road prototype, this engine house looks great in any diesel-era servicing scene and is adaptable to other industrial scenes. The Two-Stall 130' Brick Diesel House is one of many Cornerstone N Scale railroad buildings. Prototypes in service from 1930s to the present Must-have for major engine terminals and backshops Slotted base accepts popular rail sizes Easy-to-build plastic kit Molded in four appropriate colors and clear plastic Main Building: 10-3/4 x 6-3/4 x 3-1/4" 27.3 x 17.1 x 8.2cm Office: 3-1/8 x 1-5/8 x 1-1/4" 7.9 x 4.1 x 3.1cm More Information Item # 933-3266 Brand Walthers Cornerstone  Scale N Type Building Kit Size 10-3/4 x 6-3/4 x 3-1/4" or 27.3 x 17.1 x 8.2cm Availability In-Stock/Restockable TCA Grading C-10 Mint - Brand New Instruction Sheet View/Download

Read more less

From the early years of the 20th century to the present, buildings like the Walthers Cornerstone American Hardware Supply have been a familiar part of big city skylines. Just about any manufacturing operation could be found here over the years. You'll find this building is easy to modify for your needs too! Optional loading doors, windows or solid brick panels are provided for the ground floor so you can give your model a unique appearance. A modular design makes it easy to combine kits for a larger building, and there are many possibilities for kitbashing too. A concrete railroad loading dock and colorful signs for a variety of businesses round out this versatile structure. As shown American Hardware Supply measures: 8-1/4 x 5-3/4 x 6-7/8" 20.9 x 14.6 x 17.4cm American Hardware Supply is just one of a wide variety of Cornerstone N Scale industrial buildings. Classic 1900s design Brick construction Fits steam or diesel-eras Molded in appropriate color More Information Item # 933-3253 Brand Walthers Cornerstone  Scale N Type Building Kit Size 8-1/4 x 5-3/4 x 6-7/8" or 20.9 x 14.6 x 17.4cm Availability In-Stock/Restockable TCA Grading C-10 Mint - Brand New Instruction Sheet View/Download

Read more less

While most roads had one major backshop, the prototypes for the Walthers Cornerstone Machine Shop allowed railroads to make repairs at outlying terminals since it was often faster, more cost-effective and got the locomotives back on the road and earning their keep. As new engine terminals were built, most received a machine shop capable of handling just about any type of repair that might be needed. This kit matches the design of the Modern Roundhouse (933-3260, sold separately), and can be built as an attached or freestanding building. It also includes a boiler house, which would supply steam, electricity and compressed air to the entire facility. Large roll-up doors can be built open or closed, and the baseplate of the Machine Shop kit has slots that accept popular rail sizes. The Machine Shop is one of many Cornerstone N Scale railroad buildings. As shown the Machine Shop measures: 8-1/8 x 5-1/4 x 6-1/2" 20.6 x 13.3 x 16.5cm Authentic North American prototype Use with late steam and diesel-era layouts Matches design of Walthers Modern Roundhouse kit Separate windows Floor baseplate accepts popular rail sizes Molded in appropriate colors plus clear window glazing More Information Item # 933-3264 Brand Walthers Cornerstone  Scale N Type Building Kit Size 8-1/8 x 5-1/4 x 6-1/2" or 20.6 x 13.3 x 16.5cm Availability In-Stock/Restockable TCA Grading C-10 Mint - Brand New Instruction Sheet View/Download

Read more less

The prototypes for railroad buildings like the Walthers Cornerstone Car Shop evolved into long, specialized structures dedicated to freight or passenger car repairs. Several tracks ran the entire length of the building so cars could be moved quickly between workstations handling trucks, brakes, interiors and other appliances. Perfect for servicing any kind of equipment, this kit features a modular design so several can be combined to build a larger building, and it's a natural for modeling all kinds of heavy industries. Without the car shop, a railroad just doesn't run. Big enough to look right, small enough to fit steam or diesel-era layouts, this model is packed with features. Detailed brickwork, an authentic saw-tooth style roof with skylights, separate windows, roll-up doors, openings in the floor for rail, everything right down to the decals, is included. The basic Car Shop kit as shown builds a three-stall shop measuring 7 x 5-1/4 x 4-3/4" 17.7 x 13.3 x 12cm. The Car Shop is one of a wide variety of Cornerstone N Scale railroad buildings. 3-stall brick Car Shop Modular design allows kits to be combined for a larger complex Saw-tooth style roof Great for steam or diesel-era layouts Molded in appropriate colors and clear plastic More Information Item # 933-3228 Brand Walthers Cornerstone  Scale N Type Building Kit Size 7 x 5-1/4 x 4-3/4" or 17.7 x 13.3 x 12cm Availability In-Stock/Restockable TCA Grading C-10 Mint - Brand New Instruction Sheet View/Download

Read more less

Add aggregate traffic to your layout with this rugged trackside structure. The Walthers Cornerstone Glacier Gravel Co. is a model of a stone crusher-washer with equipment for loading rail cars or trucks. Railroads have an enormous appetite for crushed rock. A mile of mainline can gobble up thousands of tons. Glacier Gravel Co. will help satisfy your railroads appetite for rock. This easy-to-build kit looks great as part of a stone quarry operation, alongside mines like the New River Mining Co. 933-3221 and Coal Flood Loader 933-3247, in a mine, or as part of a slag recovery operation down the track from the steel mill buildings. Detailed parts capture the look of concrete and steel construction. The kit features corrugated construction on a heavy poured concrete foundation/loading tunnel. Conveyors to a truck dump and feeder from the quarry complete the facility. Rock crushers similar to this have been in use since the 1940s, so Glacier Gravel Co. will fit perfectly into transition and modern era layouts. The main building can accommodate two tracks inside and includes a detailed loading bin. Glacier Gravel Co. also includes decal signs and complete instructions. Glacier Gravel Co. is just one of a wide variety of Cornerstone N Scale industrial buildings. The finished model measures: 5-5/8 x 6-5/8 x 6-1/8" 14.3 x 16.8 x 15.6cm Easy-to-build plastic kit Use as a stand-alone rock crusher and loader or as part of a larger quarry or mine Fits 1940s and later modeling eras Two loading tracks Molded in appropriate colors Decal signs included More Information Item # 933-3241 Brand Walthers Cornerstone  Scale N Type Building Kit Size 5-5/8 x 6-5/8 x 6-1/8" or 14.3 x 16.8 x 15.6cm Availability In-Stock/Restockable TCA Grading C-10 Mint - Brand New Instruction Sheet View/Download

Read more less

The Walthers Cornerstone N Scale Industrial Office is typical of small buildings found at the entrance to large factories like steel mills and assembly shops. It's also ideal for use as a great free-standing small business, yard office or crew room. Structures like the Industrial Office are all over and look great in any industrial district. Use it in scenes with other Cornerstone N Scale industrial buildings. Realistic brickwork Realistic entry steps Decal signs for a variety of businesses Front awnings, gutters, downspouts and rooftop ventilators Use as railroad or trucking office, stand-alone business or entry building for manufacturing complex Molded in color plus clear glazing More Information Item # 933-3834 Brand Walthers Cornerstone  Scale N Type Building Kit Size 3-5/8 x 2-1/4 x 1-3/4" or 9.2 x 5.7 x 4.4cm Availability In-Stock/Restockable TCA Grading C-10 Mint - Brand New Instruction Sheet View/Download

Read more less

Revitalize your N Scale business community with the Modern Shopping Center I from Cornerstone(R), featuring three stores in one compact, contemporary structure! The model features a decorative front wall for added realism, detailed brickwork, large glass windows and entry doors, and colorful signs for a variety of businesses. More Information Item # 933-3891 Brand Walthers Cornerstone  Scale N Type Building Kit Size 6-1/4 x 3 x 2-1/8" or 15.8 x 7.6 x 5.3cm Availability In-Stock/Restockable TCA Grading C-10 Mint - Brand New Instruction Sheet View/Download

Read more less

Performing everything from painting to complete rebuilds, the prototypes for the Walthers Cornerstone Allied Rail Rebuilders kit captures the realism of these large buildings in a size that works on most layouts. Lots of details are included, such as an EMD 567 prime mover, separate roof vents, interior trusses, doors and windows. Allied Rail Rebuilders is typical of brick industrial and maintenance shops and is ideal for other types of heavy industries. Great for steam or diesel-era layouts Brick main building with clerestory Rooftop smokestacks Detailed interior trusses EMD 567 prime mover Molded in appropriate colors Realistic decals More Information Item # 933-3211 Brand Walthers Cornerstone  Scale N Type Building Kit Size 5-1/2 x 5-5/8 x 3-1/2" or 13.7 x 14 x 8.7cm Availability In-Stock/Restockable TCA Grading C-10 Mint - Brand New Instruction Sheet View/Download

Read more less