Sure to be the focal point of any N Scale engine terminal, this Walthers Cornerstone 130' Motorized Turntable is where steam locomotives, and later diesels, were turned around at the end of their runs. Normally serving a roundhouse, turntables were placed adjoining the roundhouse, servicing tracks and at major terminals, backshops. This 130' turntable is large enough to turn larger locomotives such as a 4-8-4 Northerns, 2-10-2s all the way up to a 4-8-8-4 Big Boy. It'll look great at your locomotive terminal, at junctions and anywhere else large steam locomotives must be turned. On your layout use the 130' Motorized Turntable as the heart of your servicing facility alongside other Cornerstone N Scale railroad buildings. 130' length typical of large tables built from 1920s on - some still in service today Must-have detail for engine terminals Holds locos up to 9-3/4" 24.7cm long - big enough for a 4-8-8-4! Layout mounting templates for pit and Cornerstone Turntable Control Box User-friendly, illustrated instructions simplify assembly Requires 9-15/16" 25.2cm mounting hole to be cut in layout for installation 10-3/8" 26.3cm overall diameter Control Box included for use on layouts with DC or DCC train control New Cornerstone Turntable Control Box for simple operation and programming with: Programmable indexing for up to 99 different tracks One-touch 180-degree bridge rotation in either direction Simplified LED display with adjustable brightness Operable from up to four remote locations with additional Control Boxes (933-2320 each sold separately) Optional: To control turntable operation with DCC throttle or serial UART controller, purchase Cornerstone Advanced Control Module (933-2321, available separately) Comes complete with motor and Control Box, operates on 12-18v AC, 16-24v DC power supply (power supply not included) Comes with Code 80 rail installed on bridge

Read more less

Spotlight is designed and ready to plug into the Just Plug Light Hub. Kit includes: 2 Large Spotlights

Read more less

Keep raw materials moving along your railroad with the Cornerstone Rotary Dumper kit! Designed to unload cars without the need for uncoupling, the prototypes serve a variety of industries that require large volumes of bulk material such as coal, woodchips and limestone. Designed for easy construction, this detailed structure kit features:  Essential detail for modern heavy industries Prototypes in service from the 1970s to the present Use with powerplants, paper mills, steel mills and more Highly detailed plastic partsModel a complete power grid with these Cornerstone kits, including the Coal Conveyor with Transfer House (#933-4171), Modern High-Voltage Transmission Towers (#933-3343), Lakeshore Energy Power Plant (#933-4172), Substation (#933-4175), Intermediate Height "Wood" Utility Poles (#933-4173), plus SceneMaster Utility Poles (#949-4120) and Utility Company Vehicles (#949-11636 series), each sold separately   Kit measures: 10 x 6-1/8 x 3-1/4" 25.4 x 15.5 x 8.2cm; Required depth clearance: 2-3/8" 6cm The Rotary Dumper is just one of a wide variety of Cornerstone industrial buildings.   

Read more less

Blunami will change the way you enjoy the model railroading hobby! The Blunami BLU-4408The BLU-4408 is designed to wirelessly operate models with higher stall currents such as some S, O, and large scale locomotives; this decoder features easy-to-use terminal blocks for no-fault wiring and a higher audio amplifier for awesome volume, indoors or out. Blunami decoders can be operated in three different ways: DC, DCC and Wireless mode. Using the Blunami app (iOS versions 8 or later), you can operate your locomotive with incredible ease of use. You will feel like you are in the cab with the amazing new features that Tsunami2 has to offer including: Reactive Dynamic Digital Exhaust, Functioning locomotive and train brakes, injectors, power reverse, and firebox flicker. We also offer a large selection of selectable sound effects including: exhaust chuffs(10), prime movers (up to 12), bells (12), Whistles (90), airhorns (40+), couplers, dynamos and more! DYNAMIC DIGITAL EXHAUST For added realism, you’ll love our reactive Dynamic Digital Exhaust (DDE) feature. When your locomotive is traveling across flat terrain and simply maintaining speed, you will hear your locomotive chugging along. But, when the locomotive encounters a grade and the engineer applies more throttle to get the train up the hill, the engine sounds will automatically react and reflect the increase of power needed to crest the hill. DDE accomplishes this by calculating the changes in strain or load on the motor and adjusting the exhaust to appropriately simulate the work the engineer would be doing to the throttle of the engine. This gives Tsunami2 the ability to create the most realistic experience possible.HIGH QUALITY SOUND LIBRARYOur large selection of high quality sound effects include:  10 Exhaust Chuffs Up to 12 Prime Movers in each sound profile  Up to 12 Bells  90 Whistles 40+ Airhorns Additional couplers, dynamos, cab chatter and more! ADDED REALISMAdditional realism can be simulated by adding functioning locomotive and train brakes, injectors, power reverse, firebox flicker and more. EASY INSTALLATIONNo soldering required! This decoder features easy-to-use terminal blocks for no-fault wiring. This 4-amp, universal-style format decoder includes a connector to easily add a CurrentKeeper (P.N. 810140 or 810160) to maintain performance over dirty track and switches. Dimensions: 69 x 30.5 x 14mm  Max. Motor Stall Current: 4A Max. Function Current: 400mA (each output) Function Outputs: 8 Audio Amplifier: 3 Watt, 8-Ohm Load DCC Track Voltage: 7.5V – 26V Sound Channels: 16   Blunami Owner's Manual Blunami Installation Guide Blunami Steam User's Guide Blunami Diesel User's Guide Blunami Electric User's Guide   Blunami Sound Selection References: Blunami Steam-2 Sound Selection Reference Blunami EMD Sound Selection Reference Blunami EMD-2 Sound Selection Reference Blunami GE Sound Selection Reference Blunami ALCO Sound Selection Reference Blunami Baldwin & Others Sound Selection Reference Blunami Electric Sound Selection Reference   Blunami Sound Samples Blunami Steam-2 Sounds Blunami EMD Blunami EMD-2 Sounds Blunami GE Sounds Blunami ALCO Sounds Blunami Baldwin & Other Diesel Sounds Blunmai Electric Sounds SoundTraxx A true pioneer in the model train industry, SoundTraxx has been creating innovative products for the discriminating model railroader since 1990. We proudly design and manufacture our industry-best products right here in the USA, and our friendly customer support staff work side-by-side with the rest of our product team.

Read more less

Kit includes: 1 Warm White Stick-On LED 2 Warm White Nano LEDs Minimum 15" wire with Just Plug connector Every town has a local butcher to supply the finest cuts around, and N Scale Carver's Butcher Shoppe only offers the best. This building is hand-painted with authentic weathering, including peeling paint and worn cedar shake shingles on the roof. The interior features a 3D meat counter with a selection of the freshest delicacies. If you peek into the windows of the loading dock door, you'll see a variety of meats hanging for the best flavor and tenderness. Additional features include loads of signage, stairs, a water hose and an entryway porch. The structure also comes with pre-installed LED lighting made for use with the Just Plug® Lighting System. 30mA RoHS Compliant Other scales: HO Scale O Scale

Read more less

The LM-3 is a module that you can install into a model train locomotive so the locomotive can be controlled and setup by a Ring Engineering RailPro Controller, such as the HC-2 Handheld Controller with a Color Touch Screen! After the LM-3 is installed in a locomotive, you will be able to control the locomotive speed, direction, up to 6 light outputs! The LM-3 has “Direct Radio” (RF transceiver) built inside. The built in RF module allows commands and data to be sent and received to and from the module. You can load a picture of your choice into the LM-3 module. Then you will be able to touch the screen of the HC-2 to take control of your locomotive!The LM-3 is electrically compatible with the DCC plug found in many locomotives to promote easy installation. Product Specifications: Sound Profile: Universal (all) Dimensions: 1.50 x 0.68 x 0.25 in DCC Track Voltage: 7.5V – 18V Light Outputs 6   The LM-3 is equipped with Direct Radio! This allows Ring Engineering Controlling Devices such as the HC-2, Handheld Controller with Color Touch screen, to control and configure your locomotive by sending and receiving data directly to the LM-3 through the air by use of RF transmission! The Direct Radio is very fast giving your locomotive quick response to your controls. Further, a controlling device can detect your LM-3 with just a few touches on the screen. Because of Direct Radio, you can load a picture of your locomotive to the LM-3! You can also load Light Effects and much more!Radio Load Sharing is a truly an innovative invention from Ring Engineering. It allows your locomotives that are linked together (sometimes called Consisted or MU'ed) to actually share pulling power. Only RailPro equipped locomotives use Direct Radio to talk to each other to be sure each locomotive pulls its share of the load! Even more amazingly, Ring Engineering's patent pending process only takes seconds to setup!Six light outputs. Can be configured for multiple light effects on a single output including On/Off, Dim, Ditch, Mars, Strobe, and more! Additional light effects can be loaded using DirectRadio!Built in protection with fault reporting by Direct Radio!Tiny size 1.50 x 0.68 x 0.25 Inches for easy fit.

Read more less

CD-Quality Sound: TCS’ world-renowned CD-quality sound. 16 Bits of resolution at 44.1kHz sample rate. Back EMF Load Compensation: Provides superior slow speed control and high performance under load. Quiet Drive: Super-quiet motor control for “buzz” free motor performance. Variable Momentum: Allows you to make custom acceleration and deceleration curves. Incandescent Bulb Support: This decoder can be used with 12 Volt bulbs. Function Remapping: Buttons 0 through 12 may be used to control the lighting functions of this decoder. Programmable Lighting Effects: Choose from 20 separate user-programmable lighting effects! Dimmable Brightness: Configure multiple different brightness levels for your LED’s or incandescent bulbs. Decoder Lock: Feature which prevents accidental/unwanted programming while activated. Airwire™ Compatible: Fully compatible with Airwire™ operation. Audio Assist®: TCS exclusive auditory feedback programming system. Program your decoder without the need to memorize CV’s! User-Loadable Speed Tables: Configure custom speed curves and set speed limits. Throttle Modes: Choose from multiple throttle modes to meet your operating needs. Proto Notch™: A WOWSound original feature which uses TCS’ exclusive auto-adjusting BEMF technology to automatically choose the active notch sound. Prototype Mode also offers dynamic sound volumes which accurately model the real-life equivalent. Also includes pre-programmed acceleration and deceleration values. Specs Interface Type: Direct-Plug (21-Pin MTC) Dimensions (L x W x H): 1.28″ x 0.689″ x 0.22″ or 32.5mm x 17.5mm x 5.6mm Scale: HO Scale Continuous/Peak: 1.3/2.0 Amp Total Functions: 8 Function Rating: 100 mA 12V Outputs: 8 Speaker Selection This decoder is optimized for 8 Ω speakers (not included). This decoder uses and audio amplifier capable of supplying up to 2 Watts of power. A 1 Watt minimum power rating is recommended for use with this decoder. If you are using a speaker with less than 1 Watt power rating, you must reduce your volume to prevent speaker failure or amplifier stress. Speaker enclosures greatly increase speaker performance in most cases.

Read more less

This 25mm x 14mm speaker is a tough little beast capable of accepting 2W of audio and still producing a clear and accurate sound. The military spec. rating of these speakers means they are dust proof and IPX5 certified water proof. Truly an impressive speaker in a package small enough for most steam installs and the more dedicated diesel installs. Dimensions: 0.98″ x 0.55″ x 0.3″ or 25mm x 14mm x 7.5mm Sound Pressure Level: 81 dB ± 3.0 dB at 1W, .5m, 1.5 KHz. Effective Frequency Band: 400 Hz. to 20,000 Hz. Power Rating: 2W (Typical) 2.5W (Peak) DC Impedance: 8 Ω ± 15 % at 1.0V 900 Hz.

Read more less

Since smart phones with touch screens have almost completely replaced the conventional mobile phone, model train enthusiasts and manufacturers face the question how to employ more powerful devices for controlling model trains. As a result of this, many apps have been developed lately, which can be uploaded onto your mobile phone and used for running your trains. This concept, however, has one disadvantage, namely that smart phones have not been primarily designed for running model trains. Due to the lack of suitable input elements the operator is forced to spend most of the time looking at the display. The limits become quickly obvious so we at ESU had a look at the question on how to utilize the advantages of the smart phone technology and combine it with the needs of model train enthusiasts. It is with great joy that we now present the results of our considerations. With the new ESU CabControl DCC system you have wireless control of your locomotives, accessories and routes simply by Wi-Fi! With the 50310 CabControl Integrated Control Unit, advanced model railroading is as simple as ever. With our new system, you have full control over your locomotives, switches and signals just at the tap of a finger. The unit communicates with our Mobile Control II Wireless Controller via wireless LAN. The CabControl’s integrated 7 Amp booster also allows it to power even larger layouts with ease. LokSound decoders equipped with RailComPlus® even register automatically with the system! Running trains has finally caught up with the technology of today! CabControl - Integrated Control Unit ESU’s “North American” System This system was specially developed for use in North America and Australia. American and Australian locomotive icons (along with European Icons) Easy Consisting for multiple unit lash-ups using drop down menus Wireless walk around system making it easy to follow your train on a large layout. Technical Specification CabControl Features All DCC modes (14, 28, 128 speed steps) Long and short addresses Over 16,000 locomotives can be arranged and controlled Up to 28 functions per locomotive All Scales can be used with the CabControl system with the variable voltage 7Amp Power Supply Built-in WLAN Access Point Creates a unique Wifi-Network for your Mobile Control II Wireless throttles Supports at least 32 Mobile Control II Wireless ControllersCompliant with all relevant IEEE WLAN standards. Suitable for use in America and Europe The CabControl features a LAN port to connect the box to your home network. Via the home network, the CabControl can be connected to Model RailRoad Control Software. “ECoSlink” port For easy connection with our ESU boosters, CabControl supports ECoSlink, a high speed, CAN based bus system. The CabControl built-in booster has so much power that, in most cases, you don‘t need additional ones. Hook Up Hook up is simple with the CabControl system. All you have to do is plug the 7 Amp power supply into the CabControl box and then hook up your CabControl box to your track for track power and its ready to go!  The wireless controllers automatically connect to the system via WLAN.  Upgradable On occasion new features will be added to the CabControl system. Gone are the days of having to send your DCC command station back to the manufacturer for updates! When a new update becomes available it is as simple as loading this to a USB Data stick and plugging it in to the back of the system. Easy! Protection Each CabControl system meets the relevant requirements regarding safety and operation on a layout: The track outlet is protected against overload as well as short circuits. Each CabControl system can differentiate between a “genuine” short, and a momentary current drain when passing over switches or gaps. We place value on the indestructibility of the device, just like we do with our mobile decoders. Expansion As the CabControl System uses the ESU Mobile Control II Wireless Throttles, expansion is easy as these throttles are already available and will connect automatically to the Integrated Control Unit. The system can also be used with the ECoSBoost Boosters using the ECoSlink Terminals when more power is needed for large layouts. CabControl - Handheld Wireless Throttle Ergonomics & Functionality Combined When you hold your CabControl Throttle in your hands for the first time you will immediately notice its excellent ergonomics. All Parts of the screen can easily be reached with one hand, and unlike a cell phone throttle, the most important functions can even be reached “without looking” giving you the ability to watch your trains and not needing to watch your throttle. This is due to the central, motorized throttle knob with end stop. With this knob you can delicately control the speed of your trains and change direction. For activating functions simply touch the icons on the display. The display also serves for changing functions – exactly the same way as you know it from your mobile phone.  Finally, two buttons each on either side serve for changing direction or triggering the most important functions. These side buttons are user editable giving you the choice of what you want to control with them. Colorized Function Icons are displayed showing what function does what. Gone are the days of having to memorize what function button control what decoder feature. Running Locomotives The CabControl Throttles can control all locomotives registered in the system and supports 14, 28 or 128 speed steps. All of the important locomotive properties such as name, a picture, function mapping as well as easily identifiable icons for function buttons will be taken from the Integrated Control Unit and will be displayed correctly. You may switch up to 28 functions for each locomotive, which, of course, can either be momentary or continuous functions. You read that correctly! EVERY Function Button can be momentary or latching depending on your use! No more limitations on how you function map your decoders. As standards are constantly changing and the number of DCC function buttons is increased a simple update will allow for even more! Controlling Accessories The CabControl System has the ability to run over 1000 magnetic accessories. More Fun in Operations The high resolution (480 x 800 pixels, 280 dpi), backlit TFT display of the CabControl Throttle always keeps you up to date on the most important operating parameters. Furthermore, you can see if another operator controls a certain locomotive or if an emergency stop has been triggered. The permanently installed, powerful Lithium polymer rechargeable battery will serve you right through the most extensive operating sessions giving 5-8 hours of operation based on how you are using your throttles. Recharge the batteries of your CabControl simply by using the USB port on the Integrated Control Unit and the supplied Micro USB Cable or the battery charger of your mobile phone or any other USB port. Open Platform The CabControl Throttles are based on the Android operating system. We have created a powerful basis for this open, globally used operating system:  The ARM® Cortex® A8 microprocessor clocked with 1.3 GHz and controls a high resolution 3.2 inch TFT color display. A capacitive touch screen assures touch-free data entry. For communicating with the “outside world” there is an USB port and a WLAN interface. Thanks to the standardized radio control interface, trouble free operation of your layout can be assured at any time. The range can be extended with WLAN repeaters, if necessary. Due to the open platform design you may add further apps for the Google Play Store at any time.   *The CabControl DCC System was specifically created for the North American and Australian Market and as such can only be purchased though ESU LLC in the USA. More Information Item # 50310 Brand ESU Scale Multi

Read more less

This Kato GE ES44AC is based on units in service from coast to coast since the 2003. This standard DC locomotive features a five-pole motor with dual flywheels, directional LED headlights, highly detailed body, wheel profiles for operation on Code 55 and larger rail, great decoration and Kato knuckle couplers. It can be converted to DCC operation by changing out the lighting board with a DCC decoder of your choice (sold separately). The GE ES44AC will be at home on the head end of your railroad's 2000s and later freight consists.

Read more less

Laser-Cut Kit Glue from Deluxe Materials is designed specifically for the rapid construction of wood and cardstock laser-cut kits. The carefully designed bottle has a twist lock cap with fine dispensing needle applicator which is easily removed for cleaning. The low-viscosity formula and needle applicator ensure easy application directly onto open or pre-assembled joints typically found in laser cut kits. Benefits of Laser-Cut Kit Glue include precision application, anti-clog applicator during use, easy clean-up with water, bonds plastics and painted wood; safe and odorless.  5/6oz 25mL

Read more less