Track-Bed Roll offers a smooth application. It deadens sound, requires no pre-soaking like cork, remains flexible and will not dry out or become brittle. Aligns well with cork or Homasote applications. Install easily with Foam Tack Glue™ (ST1444). Pin in place with Foam Nails (ST1432). 1 roll/pkg- 3/16" D x 1 3/4" W x 24' L (5 mm x 4.44 cm x 7.31 m)

Read more less

3.75 fl oz (110 mL)

Read more less

Use Medium Green to model summer grasses. It also works great along roads and in ditches. 57.7 in3 (945 cm3) 1/16" - 1/8" (1 mm - 3 mm) in length

Read more less

The TSU-21PNEM8 is a 1-amp Digital Sound Decoder with 8 function outputs. It is designed for easy plug-in operation when mated to a 21-pin NEM connector. You will feel like you are in the cab with the amazing new features that Tsunami2 has to offer including: Reactive Dynamic Digital Exhaust, Functioning locomotive and train brakes, injectors, power reverse, and firebox flicker. They also offer a large selection of selectable sound effects including: exhaust chuffs(10), prime movers (up to 12), bells (12), Whistles (90), airhorns (40+), couplers, dynamos and more! The TSU-21PNEM8 can be wired to a CurrentKeeper (P.N. 810140) to maintain performance over dirty track and switches. Product Specifications: Sound Profile: ALCO Diesel Dimensions: 30.5 x 15.5 x 6.5mm Max. Motor Stall Current: 1A Max. Function Current: 100mA (each output) Function Outputs: 8 Audio Amplifier: 2 Watt, 8-Ohm Load DCC Track Voltage: 7.5V – 22V Sound Channels: 16

Read more less

TRAIN-13 LI-ION 18.5V / 3.5Ah Great for "dead rail" model railroad installations in locomotive (most likely G-scale or LGB) or trailing power cars. Approximate Dimensions: 1.38" x 2.20 x 2.64" Weight: .55lb Connector: 20AWG JST SM Max Continuous Discharge: 6A Overdischarge protection: Yes Overcharge protection: Yes Recommended Charge Current: 1A Short Circuit Protection: Yes Please fully charge battery prior to storage. Batteries should be charged every 3 months during periods of storage. 

Read more less

Greas-em Dry Graphite Lubricant This fine, dry graphite lubricant is specially selected for use with Kadee® Couplers & Trucks. 5.5 gram tube Also an excellent general purpose lubricant for use all around the layout to reduce friction in moving parts and bearing surfaces. Add a puff inside your couplers, move them back-and-forth a few times to burnish and enjoy smooth action of your couplers. Ideal for reducing friction of moving parts and bearing surfaces. Package Includes: (1) Greas-em Dry Graphite Lubricant 5.5 gram tube

Read more less

The #148 Whisker® Metal Coupler will work anywhere a NO.5® Coupler will work and is a direct replacement for most Bachmann On30 couplers & a direct replacement for most plastic Medium Centerset "clone" couplers. This industry leading coupler features an all metal coupler head, shank, and Whisker® centering spring and comes complete with insulated draft gearbox and lid. The #148 Magne-Matic® Whisker® Metal Coupler may be mounted with the included #242 Snap-Together Gearbox or with other manufacturers cast-on coupler pockets. It is not recommended to use a metal coupler directly on a metal surface or in a metal draft gearbox to avoid possible electrical crossover and shorting that may cause damage. Use the provided insulated gearbox or insulated #28 coupler. HO-Scale Package Includes: (2) Pair #148 Whisker® Metal Couplers - Medium Centerset Shank (2) Pair #242 Snap-Together Gearboxes (2) #622 Knuckle Springs #148 Whisker® Metal Coupler Features: Material  -   Metal Shank Length  -   Medium (9/32") (center hole to back of coupler head) Coupler Offset  -   Centerset Knuckle Spring  -   #622 Centering System  -   Whisker® Head  -   Standard Head Works In Place of  -   NO.5®, #58, #28, #38 (#148 in a #252 box), #118, #119, #158, medium centerset "clone" couplers Works With  -   #213, #232, #234, #242, #252, #262, manufacturer cast-on draft gearboxes #242 Snap-Together Gearbox Features: Material  -   Insulated Plastic Lid Type  -   Snap-Together Dimensions  -   7/16"L x 5/16"W x 1/8"H Works With  -   NO.5®, #58, 20-Series and 40-Series, All Whisker® Couplers Mounting Specifications: Mounting Height  -   29/64" Centerline  -   25/64" Trip Pin Height  -   1/32" Center Hole  -   2-56 Insulated Screws are the most commonly used. (Screw length will vary) Recommended Tools: #206 Insulated Muti-Purpose Coupler Height Gauge #231 Greas-em Dry Graphite Lubricant #237 Coupler Trip Pin Pliers #240 Double Headed Pin Vise #241 Dual Tool Manual Uncoupling Tool and Spring Pick #246 Tap (2-56) and Drills (#50 and #43)

Read more less

This industry leading coupler features an all metal standard coupler, and #634 standard centering spring. The #58 Magne-Matic® "Scale" Metal Coupler may be mounted with the #213, #232, #234, #242 Gearboxes (not included) or with other manufacturers cast-on coupler pockets. The 158 Whisker® Coupler is equivalent to the #58 "Scale" Metal Coupler. It is not recommended to use a metal coupler directly on a metal surface or in a metal draft gearbox to avoid possible electrical crossover and shorting that may cause damage. Use the provided insulated gearbox or insulated #28 coupler. HO-Scale Package Includes: (20) Pair #58 "Scale" Metal Couplers - Medium Centerset Shank (20) Pair #634 Centering Spring NO.5® Style Extra #625 Knuckle Springs NO.5® Metal Coupler Features: Material  -   Metal Shank Length  -   Medium (9/32") (center hole to back of coupler head) Coupler Offset  -   Centerset Knuckle Spring  -   #625 Centering System  -   Standard Shank Centering Spring  -   #634 Centering Spring NO.5® Style Head  -   "Scale" Head Works In Place of  -  NO.5®, #28, #118, #119, #148, #158, most medium centerset "clone" couplers Works With  -   #213, #232, #234, #242, most manufacturer cast-on draft gearboxes #232 Plastic Draft Gearboxes & Lids (Not Included)Features: Material  -   Insulated Plastic Dimensions  -   29/64"L x 19/64"W x 7/64"H Works With  -   NO.5®, #58, 20-Series and all Whisker® Couplers Mounting Specifications: Mounting Height  -   29/64" Centerline  -   25/64" Trip Pin Height  -   1/32" Center Hole  -   2-56 Insulated Screws are the most commonly used. (Screw length will vary) Side Holes  -   0-48 Self-Tapping or 0-80 Machine Screws. (Screw length will vary) Recommended Tools: #206 Insulated Muti-Purpose Coupler Height Gauge #231 Greas-em Dry Graphite Lubricant #237 Coupler Trip Pin Pliers #240 Double Headed Pin Vise #241 Dual Tool Manual Uncoupling Tool and Spring Pick #246 Tap (2-56) and Drills (#50 and #43) #780 Tap (0-80) and Drills (#55 and #52)   Made in the U.S.A.

Read more less

This function-only decoder is designed for any scale where extra lighting features and functions are needed. These decoders are commonly used for smoke coils, fireboxes, or step lights.  Note: FL-series decoders do not provide motor control. A separate decoder must be used for motor function. Function Only: This decoder only has function control for lighting, and does not provide sound or motor control.  DC Mode: Decoder will automatically detect DC power. You can also configure how your lighting effects function on DC.  Incandescent Bulb Support: This decoder can be used with 12 Volt bulbs.  Function Remapping: Buttons 0 through 12 may be used to control the lighting functions of this decoder.  Programmable Lighting Effects: Choose from 20 separate user-programmable lighting effects! Dimmable Brightness: Configure multiple different brightness levels for your LED's or incandescent bulbs.  Decoder Lock: Feature which prevents accidental/unwanted programming while activated. Airwire™ Compatible: Fully compatible with Airwire™ operation. Dimensions: 0.558" x 0.357" x 0.12" or 14.17mm x 9.06mm x 3.06mm Interface Type: Hard-Wire Scale: O Scale, HO Scale, G Scale, N Scale Continuous/Peak: 1.0/2.0 Amp Total Functions: 4 Function Rating: 200 mA 12V Outputs: 4

Read more less

The WOW121 is a universal sound decoder for locomotives with DCC-ready 21-pin MTC connectors, and can also be used with any of TCS’ motherboards. The WOW121 requires a motherboard to interface with the locomotive. The motherboard will determine the support for the number of lighting functions as well as the type supported (LED or 12V/1.5V bulbs). A WOW121 decoder will support up to 8 lighting functions. Note: Function 5 and 6 are not programmable, and will only output constant bright lights. Take this into account when wiring multiple lighting functions. CD-Quality Sound: TCS’ world-renowned CD-quality sound. 16 Bits of resolution at 44.1kHz sample rate. Back EMF Load Compensation: Provides superior slow speed control and high performance under load. Quiet Drive: Super-quiet motor control for “buzz” free motor performance. DC Mode: Decoder will automatically detect DC power. You can also configure how your lighting effects function on DC. Variable Momentum: Allows you to make custom acceleration and deceleration curves. Function Remapping: Buttons 0 through 12 may be used to control the lighting functions of this decoder. Programmable Lighting Effects: Choose from 20 separate user-programmable lighting effects! Dimmable Brightness: Configure multiple different brightness levels for your LED’s or incandescent bulbs. Decoder Lock: Feature which prevents accidental/unwanted programming while activated. Airwire™ Compatible: Fully compatible with Airwire™ operation. CAM: Use a positive voltage trigger to synchronize your chuff rate to your drivers’ rotation. Audio Assist®: TCS exclusive auditory feedback programming system. Program your decoder without the need to memorize CV’s! User-Loadable Speed Tables: Configure custom speed curves and set speed limits. Throttle Modes: Choose from multiple throttle modes to meet your operating needs. True Scale Sound: A unique WOWSound feature which uses TCS’ exclusive auto-adjusting BEMF technology to automatically change the intensity of the chuff. Prototype Mode also offers dynamic sound volumes which accurately model the real-life equivalent. Also includes pre-programmed acceleration and deceleration values. Specs Interface Type: Direct-Plug (21-Pin MTC) Dimensions (L x W x H): 1.28” x .69” x .22” or 32.5mm x 17.5mm x 5.6mm Scale: HO Scale Continuous/Peak: 1.3/2.0 Amp Total Functions: 8 Function Rating: 100 mA 12V Outputs: 8 Speaker Selection This decoder is optimized for 8 Ω speakers (not included). This decoder uses and audio amplifier capable of supplying up to 2 Watts of power. A 1 Watt minimum power rating is recommended for use with this decoder. If you are using a speaker with less than 1 Watt power rating, you must reduce your volume to prevent speaker failure or amplifier stress. Speaker enclosures greatly increase speaker performance in most cases.

Read more less

Track is the most important model on your HO Scale layout, and WalthersTrack makes it easy to create realistic mainlines, sidings and more with Code 83 rail! Combining great looks and great performance in a complete system, each item comes fully assembled and features: Thin profile ties in realistic dark brown with enhanced wood grain detail Fine profile molded spike and tie plate details on each tie Spike-mounting holes positioned next to the rail Molded starter points on underside of ties for track nails Custom formulated nickel silver rail for outstanding electrical conductivity In addition to these details, each DCC-friendly Code 83 Turnout features: Snap-action points Solid rail points for better conductivity Isolated frogs with built-in jumper for powering as desired Current jumpers entering and leaving the frogs Insulated tie bar Click here for how-to-tips and video on replacing turnout springs. Full Instructions More Information Item # 948-83019 Brand WalthersTrack  Scale HO MSRP $37.98  TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable

Read more less